Ingersoll Rand 135-175 PSI Pressure Switch for 2-Stage Compressors

A: Howdy neighbor! You can use this pressure switch with a 3-phase compressor, but how you wire it depends on your setup. If your compressor has a magnetic motor starter box, the switch works safely by handling a low-amp control signal to turn the motor on and off. If you are wiring it directly without a starter, you must make sure the specific switch model's contacts are physically rated to handle your motor's full voltage and amperage load.

A: If you are looking for the replacement pressure switch for the TS4N5 Air Compressor then the replacement pressure switch is TSC SKU# 1076471 this is Ingersoll Rand part number 23474653 please see below link to this on the Tractor Supply Website. https://www.tractorsupply.com/tsc/product/ingersoll-rand-pressure-switch-for-2-stage-compressor-1076471 thank you,

A: Please reach out directly to our Air Compressor Technical team on this one at 800-247-7378 Part number 56288798 is a old discontinued item and there are replacements but we would need to determine a few more details about your unit because based on the year built there are different kits or switches that go with each. They will be able to provide you with the correct option and get you in touch with where you can purchase what is needed. thank you,

A: This will work with the TSC stocked TS4N5 model, the other stocked TSC unit the 2475N7.5 model uses a different pressure switch. That unit uses this pressure switch https://www.tractorsupply.com/tsc/product/ingersoll-rand-two-stage-pressure-switch-for-2475n75-2545k10-2545e10-23474570 thank you,

A: This pressure switch has the on / off switch on the side as shown in the picture. If you have adjustment issues or questions please reach out to our technical team who can walk you through any questions 800-247-7378 there are also a couple of videos on the product listing on Tractor Supply's website that talk about the pressure switch. thank you,

A: Hi there, I would recommend contacting the manufacturer. Ingresoll Rand https://www.ingersollrand.com/en-us/modals/contact

A: Hi, You can not, Using this pressure switch ensures your compressor will shut off once it reaches the pressure level you have indicated.

A: Hi D D ret, this is a Replacement for SKU# 3496129 (TS4N5) , 2340L5-V , 2340N5-V , 2340D-V its also Compatible with SKU# 3496129 (TS4N5) , 2340L5-V , 2340N5-V , 2340D-V

A: This pressure switch is intended to be used on models 2340L5 / 2340N5 / & TS4N5 which have a 21.5 Full Load amp rating.

A: 120 volts