A competitively-priced plunge-cut track saw system. The T33300 6-1/4" Track Saw can be used as a circular saw, but specializes in accurately making long cuts on oversized workpieces.

Bundle includes three 36" tracks for the ability to make cuts up to nine feet in one motion.

This system makes it easier to cut full-length sheets of plywood, double-coated MDF boards, and solid wood worktops all by yourself.

Simply mark where you would like the cut, place the track on that line, and start cutting.

This eliminates over-extended reaching and poor balance while cutting wide panels.

A track saw performs both straight cuts and plunge cuts. Plunge cuts work well for removing an area within the workpiece; straight cuts rip long pieces from end to end.

It has a built-in riving knife to reduce the risk of kickback.

Cutting depth is easily adjustable by setting a lock knob. A depth scale conveniently displays in 1/32" increments from 0-2-1/2".

The T33300ZX bundle includes three 36" Guide Rails.

Two rail clamps firmly secure the guide rail without hindering saw travel.

Four rail connectors allow for joining the guide rails for ripping full length plywood sheets.

Additionally, this bundle comes with a limit stop and an anti-tilt bar.

• Motor: 1-1/2 HP, 120V, single-phase, 9A
• Saw blade: 6-1/4" x 48 tooth
• Blade rim speed: 9070 feet per minute
• Arbor size: 3/4"
• Cutting angle: 0-45°
• Max cutting depth at 90°: without rail 2-5/32", with rail 1-31/32"
• Max cutting depth at 45°: without rail 1-5/8", with rail 1-7/16"
• Dust port diameter: 1-1/2"
• Track Saw dimensions: 12-1/2" W x 9" D x 10-1/2" H
• Approximate shipping weight 23 lbs.
• Anti-kickback design with spring-loaded riving knife
• Low-profile blade guard for cuts as close as 5/8" from wall
• Precision depth control scale in 1/32" increments from 0-2-1/2"
• 1-1/2" Dust port for efficient dust collection
• Operates with or without track
• Includes 48-tooth carbide tipped blade!
• Anti-kickback design with spring-loaded riving knife
• Low-profile blade guard for cuts as close as 5/8" from wall
• Precision depth control scale in 1/32" increments from 02-1/2"
• 1-1/2" Dust port for efficient dust collection
• Operates with or without track
• Includes 48-tooth carbide tipped blade!