DuroMax 208cc 3/4 in. Shaft Portable Gas-Powered Recoil/Electric Start Engine
DuroMax 208cc 3/4 in. Shaft Portable Gas-Powered Recoil/Electric Start Engine
Item # 158454199
$269.99
or
or
Notice:
This Item cannot be shipped to CA.
Neighbor’s Club Members earn points with purchases.
DuroMax 208cc 3/4 in. Shaft Portable Gas-Powered Recoil/Electric Start Engine
Item # 158454199
$269.99
or
or
$45/mo.† suggested payments with 6 Months Financing or earn $13 in Rewards+ on this purchase.
This item is available online only
Delivery to
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Notice:
This Item cannot be shipped to CA.Neighbor’s Club Members earn points with purchases.
The DuroMax 208cc 3/4 in. Shaft Portable Gas-Powered Recoil/Electric Start Engine is one of our most compact and lightweight engines available, but don't let the size fool you; this powerful 208cc 4-stroke OHV engine has plenty of power for multiple light duty applications including go karts, pressure washers, trailer mounted-mobile carwashes, log splitters, roto tillers- cultivators, and water/trash transfer pumps. This engine is equipped with convenient features like a large 1 gal. fuel tank for longer runtimes, an electric start option for easier startups, an E-Z Pull Recoil Starter for startup flexibility, and EPA and CARB approved for safe mandated use. Backed by a 1-year limited factory warranty.
For additional information on this product, please see the Product Documents section for all downloadable user manuals, installation guides, brochures and warranty statements.
Looking for more information on lawn mower maintenance? Check out our guide on lawn mower maintenance in the product documents section.
- 208cc 4-stroke OHV engine
- Large 1 gal. fuel tank
- Runs on Standard 87 octane gasoline
- Electric start key switch box
- Alternate Start System: E-Z pull recoil starter
- Air Cleaner: dual, semi-dry, oil bath
- EPA and CARB approved for safe mandated use
- Applications: Go Karts, Pressure Washers, Trailer Mounted - Mobile Carwashes, Log Splitters, RotoTillers - Cultivators, Water/Trash Transfer Pump
- 1-year limited factory warranty
| Brand | DuroMax |
|---|---|
| Country of Origin | Imported |
| Brand Compatibility | DuroMax |
| Engine Displacement | 208cc |
| Engine Make | DuroMax |
| Engine Type | 4-cycle |
| Features | 4-Stroke |
| Fuel Capacity | 1 gal. |
| Fuel Type | Gasoline |
| Gas/Gas And Oil Mix | Gas |
| Horsepower | 7 HP |
| Model Compatibility | DuroMax models |
| Oil Capacity | 20.3 oz. |
| Orientation | Horizontal |
| Product Type | Mower Engines |
| Primary Material | Aluminum |
| Product Height | 15.5 in. |
| Product Length | 18 in. |
| Product Weight | 46 lb. |
| Product Width | 15 in. |
| Recommended Oil Type | 10W30 |
| Warranty | 1-Year Limited Factory Warranty |
| Manufacturer Part Number | XP7HPE |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 28 Questions
Newest questions
Q: Will this engine work on a craftsman rear tine tiller model #287293190?
a month ago1 Answer
- A: Hi Neighbor! Yes, the DuroMax 208cc 3/4 in. Shaft Engine can work as a replacement engine for your Craftsman rear tine tiller, but it will not be a direct, effortless drop-in swap.a month agoHelpful?
Q: right or left shaft I need left shaft. Can exhaust be changed
a year ago1 Answer
- A: Hi Bob 27, please see the link for the manual. We don't advise making modifications to the item. If thei item will not work for your project, please work with your local TSC Store. chrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/https://media.tractorsupply.com/is/content/TractorSupplyCompany/tsc/product/1/58/45/41/1584541_Man1.pdf?_gl=1*qlzm4c*_gcl_au*MzI5Mjg5MzA2LjE3NDAxNDI1MjU.*_ga*MTkyODk1NDYwLjE3NDAxNDI1MjU.*_ga_LR2413MMX0*MTc0MDE0NTcwOC4yLjEuMTc0MDE0OTgxMC41Ni4wLjE2MDIxNjkwNTc.a year agoHelpful?
Q: How would I make this into a water pump for home fire suppression? Water would draw from tank and come out hose.
a year ago
Originally posted on duromaxpower.com
1 Answer
- A: Unfortunately Duromax wouldn't have information available for building a water pump using our engines available, however we do offer the complete high pressure water pumps that can be used for this purpose here: https://www.duromaxpower.com/collections/high-pressure/products/duromax-xp702hp-212cc-7-hp-2-inch-70-gpm-gas-powered-high-pressure-water-pumpa year ago
Q: will the xp7hpe replace a champion 27 ton log splitter model 100424 224cc ohv engine that came with thanks Tee
a year agoOriginally posted on duromaxpower.com
1 Answer
- A: We wouldn't have this information available, but we can provide the bolt pattern diagram to help you determine if his engine will fit your log splitter upon request. Please feel free to contact us at 844-DUROMAX or support@duromaxpower.com for further assistance.a year ago
Q: Does the mounting bolt pattern match honda GX 160?
2 years agoOriginally posted on duromaxpower.com
1 Answer
- A: Yes, this model engine should fit the same as the GX160; but, we always still recommend verifying the bolt pattern measurements before purchase. Please contact us at 844-DUROMAX for further assistance with these bolt pattern diagrams.2 years ago
Q: How many cranking amps does the DuroMax XP7HPE require?
2 years agoOriginally posted on duromaxpower.com
1 Answer
- A: The XP7HPE will require 47 CCA for the 12V battery used.2 years ago
Q: what is the mounting bolt hole pattern and size?
3 years agoOriginally posted on duromaxpower.com
1 Answer
- A: Bolt pattern information is available on Duromax Power by selecting the item. For more information, contact Duromax at 844-387-6629.3 years ago
Q: Is the 7hp a hemi or non hemi
3 years agoOriginally posted on duromaxpower.com
1 Answer
- A: The XP7HPE is a non-hemi engine.3 years ago
Q: Mounting holes center to center dimensions...LxW...Thanks
4 years agoOriginally posted on duromaxpower.com
1 Answer
- A: For questions on the bolt pattern for this engine, please contact Duromax directly at 844-387-6629.4 years ago
Q: Can you provide a mechanical drawing showing the dimension of the drive shaft from the mounting surface? And a drawing of the base mounting hole patern and output shaft mounting surface hole pattern with thread sizes?
4 years agoOriginally posted on duromaxpower.com
1 Answer
- A: For bolt patterns for Duromax engines, please contact them at 844-387-6629.4 years ago
1 - 10 of 28 Questions
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 28 Questions
Newest questions
Q: Will this engine work on a craftsman rear tine tiller model #287293190?
a month ago1 Answer
- A: Hi Neighbor! Yes, the DuroMax 208cc 3/4 in. Shaft Engine can work as a replacement engine for your Craftsman rear tine tiller, but it will not be a direct, effortless drop-in swap.a month agoHelpful?
Q: right or left shaft I need left shaft. Can exhaust be changed
a year ago1 Answer
- A: Hi Bob 27, please see the link for the manual. We don't advise making modifications to the item. If thei item will not work for your project, please work with your local TSC Store. chrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/https://media.tractorsupply.com/is/content/TractorSupplyCompany/tsc/product/1/58/45/41/1584541_Man1.pdf?_gl=1*qlzm4c*_gcl_au*MzI5Mjg5MzA2LjE3NDAxNDI1MjU.*_ga*MTkyODk1NDYwLjE3NDAxNDI1MjU.*_ga_LR2413MMX0*MTc0MDE0NTcwOC4yLjEuMTc0MDE0OTgxMC41Ni4wLjE2MDIxNjkwNTc.a year agoHelpful?
Q: How would I make this into a water pump for home fire suppression? Water would draw from tank and come out hose.
a year agoOriginally posted on duromaxpower.com
1 Answer
- A: Unfortunately Duromax wouldn't have information available for building a water pump using our engines available, however we do offer the complete high pressure water pumps that can be used for this purpose here: https://www.duromaxpower.com/collections/high-pressure/products/duromax-xp702hp-212cc-7-hp-2-inch-70-gpm-gas-powered-high-pressure-water-pumpa year ago
Q: will the xp7hpe replace a champion 27 ton log splitter model 100424 224cc ohv engine that came with thanks Tee
a year agoOriginally posted on duromaxpower.com
1 Answer
- A: We wouldn't have this information available, but we can provide the bolt pattern diagram to help you determine if his engine will fit your log splitter upon request. Please feel free to contact us at 844-DUROMAX or support@duromaxpower.com for further assistance.a year ago
Q: Does the mounting bolt pattern match honda GX 160?
2 years agoOriginally posted on duromaxpower.com
1 Answer
- A: Yes, this model engine should fit the same as the GX160; but, we always still recommend verifying the bolt pattern measurements before purchase. Please contact us at 844-DUROMAX for further assistance with these bolt pattern diagrams.2 years ago
Q: How many cranking amps does the DuroMax XP7HPE require?
2 years agoOriginally posted on duromaxpower.com
1 Answer
- A: The XP7HPE will require 47 CCA for the 12V battery used.2 years ago
Q: what is the mounting bolt hole pattern and size?
3 years agoOriginally posted on duromaxpower.com
1 Answer
- A: Bolt pattern information is available on Duromax Power by selecting the item. For more information, contact Duromax at 844-387-6629.3 years ago
Q: Is the 7hp a hemi or non hemi
3 years agoOriginally posted on duromaxpower.com
1 Answer
- A: The XP7HPE is a non-hemi engine.3 years ago
Q: Mounting holes center to center dimensions...LxW...Thanks
4 years agoOriginally posted on duromaxpower.com
1 Answer
- A: For questions on the bolt pattern for this engine, please contact Duromax directly at 844-387-6629.4 years ago
Q: Can you provide a mechanical drawing showing the dimension of the drive shaft from the mounting surface? And a drawing of the base mounting hole patern and output shaft mounting surface hole pattern with thread sizes?
4 years agoOriginally posted on duromaxpower.com
1 Answer
- A: For bolt patterns for Duromax engines, please contact them at 844-387-6629.4 years ago
1 - 10 of 28 Questions
Similar Items
-
-
-
-
-
Top Rated
-
Top Rated
-
Top Rated
-
-
-
-
-
Items You May Like
-
-
-
-
-
-
-
-
-
-
-
-
Top Rated
Reviews
- purchase
- starting
- satisfaction
- installation
- price
- warranty
- performance
- powerful
1 to 4 of 38 Reviews .
1 – 4 of 38 Reviews
Most Recent
Tony
Homosassa, Florida 34448
Review 1
5 out of 5 stars.
engine with starter
24 days ago
Both are excellent engines. Always start right up and never any issues
Yes, I recommend this product.
Originally posted on duromaxpower.com
vimusr
Review 1
5 out of 5 stars.
Excellent engine
9 months ago
I’ve used the big name red and white engine, and I’ve used various Chinese and other manufacturers engines. I really like these engines as their price to performance is really good and the build quality is top notch.
Yes, I recommend this product.
Originally posted on duromaxpower.com
John
Wisco
Review 1
4 out of 5 stars.
Runs good but key has to be wiggled to shut off
a year ago
Overall happy with motor but the key won’t shut off engine with wiggling it .
Yes, I recommend this product.
Originally posted on duromaxpower.com
Somerset, Kentucky
Review 1
5 out of 5 stars.
Excellent little engine to repair your garden till
2 years ago
Very well-made engine. Starts easily and it’s not too loud. I really love the key start option.
SweepstakesYes
Yes, I recommend this product.