DuraVent DuraPlus 8 in. Diameter 30 Piping Kit, 2 Elbows and Strap
DuraVent DuraPlus 8 in. Diameter 30 Piping Kit, 2 Elbows and Strap
Item # 1854281
$439.99
$439.99
Use the DuraPlus 8 in. Diameter 30 Piping Kit for offsets around obstructions such as rafters, ridgepoles, or joists. This piping kit cannot be used for offsets greater than 30 degrees as such is not permitted in accordance to UL 103 standards. The elbow and strap set's elbows swivel 360 degrees at base, but the angles are not adjustable.
- DuraPlus is designed to stay cool on the outside, to provide a hot draft on the inside, to boost stove efficiency, and to provide for a fire-safe design that protects both the chimney and the building
- Triple-wall chimney features two insulating layers (refractory blanket, plus air space)
- Refractory insulation is held securely in position, eliminating hot spots common with loose-fill type insulations
- Use piping kit for offsets around obstructions such as rafters, ridgepoles, or joists
- May have two pairs of elbows, if needed
- Offsets greater than 30 degrees are not permitted in accordance to UL 103 standards
- Elbow and strap set's elbows swivel 360 degrees at base (angles are not adjustable)
- Pair of elbows is required to return an offset chimney back to vertical
| Brand | DuraVent |
|---|---|
| Country of Origin | Made in USA |
| Burner System | N/A |
| Cabinet or Housing Material | Steel |
| Coverage Area | 0 N/A |
| Features | 0 N/A |
| Finish | Other |
| Fuel Flow Rate | 0 N/A |
| Fuel Type | None |
| Heater Control | None |
| Heating Unit Type | N/A |
| Ignition Type | None |
| Indoor/Outdoor | Indoor and Outdoor |
| Intended Use Grade | Residential |
| Maximum BTU Heat Output | 0 N/A |
| Mounting Location | Other |
| Number Of Heat Settings | N/A |
| Primary Material | Other |
| Product Height | 18.125 in. |
| Product Length | 16.5625 in. |
| Product Weight | 6.36 lb. |
| Product Width | 12.8125 in. |
| Run Time | 0 N/A |
| Warranty | Limited Lifetime |
| Manufacturer Part Number | 8DP-E30K |