$2,199.99
CountyLine 6 ft. Round Back Rotary Cutter
Exclusive
CountyLine 6 ft. Round Back Rotary Cutter
Item # 1359332
$2,199.99
or
or
Notice:
This Item cannot be shipped to CA, CO, HI, ID, IA, KS, MN, MT, NE, NV, NM, ND, OR, SD, TX, WA, WI, WY.Get everything you need
Neighbor’s Club Members earn points with purchases.
$2,199.99
or
or
$63/mo.† for 36 months totaling $2268 at 3.99% APR or earn $104 in Rewards+ on this purchase.
Shopping at
Grassland (franklin) TN
Out of stock delivering to
37027
This item will be sent to the store for Pickup and will require a Big & Bulky handling fee.Learn more
Get it by Fri, Jul 31 if ordered within the next 7 hours and 9 minutes
Oversize Items Shipped To Store may incur freight charge.
This item is not available
Search Stores
Temporarily unavailable
Notice:
This Item cannot be shipped to CA, CO, HI, ID, IA, KS, MN, MT, NE, NV, NM, ND, OR, SD, TX, WA, WI, WY.Get everything you need
Neighbor’s Club Members earn points with purchases.
Cut grass, stalks and light brush easily with the CountyLine 6 ft. Round Back Rotary Cutter. This heavy-duty rotary cutter has a round back designed for mowing tight corners and a stump jumper blade pan with 3 in. heat-treated forged blades for a better cut. Durably built for lasting use with a 12-gauge deck, this rotary cutter delivers results all season long.
For additional information on this product, please see the Product Documents section for all downloadable user manuals, installation guides, brochures and warranty statements.
- 540 RPM tractor PTO speed ONLY
- 45 HP heavy-duty cast-iron gearbox
- Rugged rotary cutter with a 12-gauge deck construction
- Balanced stump jumper blade pan with 3 in. heat-treated forged blades
- Series 4 shielded PTO shaft with shear pin
- Adjustable laminated, puncture-resistant rear wheel
- Category 1 quick-hitch compatible hookup (Cat 1 pins included with the rotary cutter)
- Tractor horsepower: 25-60 HP
- NOTE: Gearbox ships without oil and must be filled with 85W-90 gear oil before first use; front and rear rubber guards are available for all units, do not come with - see manual for all grease points before use
| Brand | CountyLine |
|---|---|
| Country of Origin | Made in USA |
| Blade Length | 30 in. |
| Blade Material | Steel |
| Blade Thickness | 0.5 in. |
| Blade Width | 3 in. |
| Cutting Thickness Range | 1 in. |
| Cutting Width | 72 in. |
| Deck Thickness | 12 gauge |
| Discharge Location | Rear |
| Frame Material | Steel |
| Gearbox Rating | 45 HP |
| Handle Length | Cat 1 / quick hitch compatible |
| Handle Material | Steel |
| Head Length | Cat 1 / quick hitch compatible |
| Head Material | Steel |
| Head Type | 38 mm socket castle nut on gearbox |
| Head Width | 1/2 in. x 3 |
| Hitch Type | Category 1 |
| Maximum Cutting Height | 9 in. |
| Maximum Tractor Horsepower | 60 HP |
| Minimum Cutting Height | 1.5 in. |
| Minimum Tractor Horsepower | 25 HP |
| Number Of Blades | 2 |
| Number Of Wheels | 1 tailwheel |
| Product Height | 18 in. |
| Product Length | 93 in. |
| Product Weight | 623 lb. |
| Product Width | 75 in. |
| PTO Drive Type | ASAE CAT 4 Shear Bolt Protection |
| Warranty | 1 year manufacturer warranty |
| Wheel Size | 15 in. |
| Wheel Type | Puncture Resistant |
| Manufacturer Part Number | RBRC602CL |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 233 Questions
Newest questions
Q: Would this be compatible with a Mahindra 1640hst?
2 hours ago1 Answer
- A: Yes, this should be compatible with this unit.26 minutes agoHelpful?
Q: which universal joint fits yoke
6 days ago1 Answer
- A: Parts for the pto shafts are not available; we only offer whole or half shafts.4 days agoHelpful?
Q: Are there safety chains sold for this?
19 days ago1 Answer
- A: Contact your local TSC store for assistance.17 days agoHelpful?
Q: where can i find replacement parts like the tail wheel mount
22 days ago1 Answer
- A: Please contact your local store to order replacement parts.22 days agoHelpful?
Q: Would this work for a case IH 585 60hp and 52hp at the pto?
26 days ago1 Answer
- A: Yes, this should be compatible with this unit.25 days agoHelpful?
Q: Would this work for a case IH 585 60hp and 42 hp at the pto?
26 days ago1 Answer
- A: Yes, this should be compatible with this unit.25 days agoHelpful?
Q: Will this work with a Deutz fahr 4065e?
a month ago1 Answer
- A: No, this tractor exceeds the horsepower rating for this unit. No recommendations.a month agoHelpful?
Q: Will this work with a John Deere 4066m?
3 months ago1 Answer
- A: This tractor would be within the recommended horsepower rating for the implement.3 months agoHelpful?
Q: Does this attach to a Kubota B2301
3 months ago1 Answer
- A: This unit requires minimum of 24 pto horsepower and has a 540 pto.3 months agoHelpful?
Q: I see references to tractors being to big for this cutter. I have a 90Hp tractor that produces the 540RPM for the PTO at 1600 or so RPM's. If I manage the RMP's, and speed I travel, why would my tractor be to big?
4 months ago1 Answer
- A: This unit is not designed for that much horsepower, even with manageable RPM's the torque going to the gearbox is more than it is designed for. This also will void the warranty.3 months agoHelpful?
1 - 10 of 233 Questions
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 233 Questions
Newest questions
Q: Would this be compatible with a Mahindra 1640hst?
2 hours ago1 Answer
- A: Yes, this should be compatible with this unit.26 minutes agoHelpful?
Q: which universal joint fits yoke
6 days ago1 Answer
- A: Parts for the pto shafts are not available; we only offer whole or half shafts.4 days agoHelpful?
Q: Are there safety chains sold for this?
19 days ago1 Answer
- A: Contact your local TSC store for assistance.17 days agoHelpful?
Q: where can i find replacement parts like the tail wheel mount
22 days ago1 Answer
- A: Please contact your local store to order replacement parts.22 days agoHelpful?
Q: Would this work for a case IH 585 60hp and 52hp at the pto?
26 days ago1 Answer
- A: Yes, this should be compatible with this unit.25 days agoHelpful?
Q: Would this work for a case IH 585 60hp and 42 hp at the pto?
26 days ago1 Answer
- A: Yes, this should be compatible with this unit.25 days agoHelpful?
Q: Will this work with a Deutz fahr 4065e?
a month ago1 Answer
- A: No, this tractor exceeds the horsepower rating for this unit. No recommendations.a month agoHelpful?
Q: Will this work with a John Deere 4066m?
3 months ago1 Answer
- A: This tractor would be within the recommended horsepower rating for the implement.3 months agoHelpful?
Q: Does this attach to a Kubota B2301
3 months ago1 Answer
- A: This unit requires minimum of 24 pto horsepower and has a 540 pto.3 months agoHelpful?
Q: I see references to tractors being to big for this cutter. I have a 90Hp tractor that produces the 540RPM for the PTO at 1600 or so RPM's. If I manage the RMP's, and speed I travel, why would my tractor be to big?
4 months ago1 Answer
- A: This unit is not designed for that much horsepower, even with manageable RPM's the torque going to the gearbox is more than it is designed for. This also will void the warranty.3 months agoHelpful?
1 - 10 of 233 Questions
Similar Items
-
-
-
-
-
-
Top Rated
-
-
-
Top Rated
-
-
-
Reviews
- price
- purchase
- setup
- quality
- satisfaction
- grass
- protection
- safety
1 to 4 of 210 Reviews .
1 – 4 of 210 Reviews
Most Recent
NJ
Review 1
5 out of 5 stars.
10 years and still going
17 days ago
I had this for around 10 years and it has done everything I've asked it to do. Sheared the driveshaft shear pin once hitting something hard, replaced it with a 1/2" hitch pin which shears a little easier.
Yes, I recommend this product.
Review 1
2 out of 5 stars.
Horrible hardware / decent cutter
21 days ago
Mower seems to be fine as far as the blades and clutch housing. This mower does not have a slip clutch. Which is why a shear bolt is required. I wouldn’t recommend using the grade 2 shear bolts. I replaced 5 bolts mowing simple grass within 2 hours. I purchased a grade 5 steel bolt and have not had issues. The deck itself is thin steel and will dent easy. The hardware that comes with the cutter is cheap rubbish. Both the shear bolts and the bolt holding your rear wheel adjustment height broke within minutes of first use.
SweepstakesYes
No, I do not recommend this product.
FL
Review 1
5 out of 5 stars.
Good brush hog
2 months ago
This is great for the price. Just started using but seems like decent quality. Also appreciated assistance we got at the Chiefland store.
SweepstakesYes
Yes, I recommend this product.
Enterprise Ga
Reviews 2
5 out of 5 stars.
Mower
6 months ago
Light made but operates smoothly behind my Massey 250
SweepstakesYes
Yes, I recommend this product.