Champion Power Equipment 2 in. Gas-Powered Semi-Trash Water Transfer Pump, 158 GPM, Hose and Wheel Kit
$449.99
Champion Power Equipment 2 in. Gas-Powered Semi-Trash Water Transfer Pump, 158 GPM, Hose and Wheel Kit
Online Only
Champion Power Equipment 2 in. Gas-Powered Semi-Trash Water Transfer Pump, 158 GPM, Hose and Wheel Kit
Item # 1598045
$449.99
or
or
Add a protection plan
Powersport plans are not available in CA & MD.
Get everything you need
Neighbor’s Club Members earn points with purchases.
Online Only
Champion Power Equipment 2 in. Gas-Powered Semi-Trash Water Transfer Pump, 158 GPM, Hose and Wheel Kit
Item # 1598045
$449.99
or
or
$38/mo.† suggested payments with 12 Months Financing or earn $22 in Rewards+ on this purchase.
This item is available online only
Delivery to
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Add a protection plan
Powersport plans are not available in CA & MD.
Get everything you need
Neighbor’s Club Members earn points with purchases.
The Champion Power Equipment 100742 2-inch Semi-Trash Gas-Powered Water Transfer Pump with Hose and Wheel Kit comes with everything you need to start pumping (just add oil and gas). Capable of passing solid waste up to 1/2 of an inch in diameter, this transfer pump is the perfect solution for moving water quickly and efficiently. Whether you are draining or refilling your swimming pool, removing water from your basement or draining shallow flooded areas, this unit features a self-priming design that holds prime even when it's not running (requires initial priming to operate). This lightweight and portable transfer pump has a maximum delivery volume of up to 158 gallons per minute and is capable of passing solid waste up to 1/2 inch in diameter. With a 2-inch NPT inlet outlet, this unit has a total head of 92 feet and a suction head of 26 feet. The complete hose kit provides everything you need to get your pump into action, including a 12-foot suction hose with filter, 25-foot discharge hose, quick cam lock coupler, clamps, adapters, fittings, nylon tape, along with a handy accessory bag to keep everything organized. Champion's reliable 212cc OHV engine has a 3-gallon fuel tank and 0.5-quart oil capacity (recommended 10W-30) and provides plenty of power for you to move water with confidence and efficiency. Transport your pump from one job to the next with ease thanks to the foldaway handle and never flat tires in the included wheel kit. The shaft seals are made of sturdy silicone carbide. The lightweight and durable steel frame along with this unit's compact design make it convenient to store your pump until the next time you need it. This water transfer pump is EPA certified and CARB exempt. Buy with confidence - Champion Support and our nationwide network of service centers will back your purchase up with a 2-year limited warranty and FREE lifetime technical support.Items Included: Hose Kit, Wheel Kit, Oil Funnel, Accessory Bag
For additional information on this product, please see the Product Documents section for all downloadable user manuals, installation guides, brochures and warranty statements.
- Everything you need to start pumping - 12-foot suction hose with filter, 25-foot discharge hose, quick cam lock coupler, clamps, adapters, fittings, nylon tape, and storage bag
- Up to 158 gallons per minute maximum delivery powered by a 212cc Champion OHV engine with a 3-gallon fuel tank and 0.5-quart oil capacity. Includes a wide priming cap for quick startup.
- Capable of passing solid waste up to inch in diameter, this pump has a 2-inch NPT inlet and outlet, total head of 92 feet and suction head of 26 feet
- Featuring a durable steel frame, handle and wheel kit with never-flat tires, this pump is easy to move from one job to the next and a cinch to store
- Includes 2-year limited warranty with FREE lifetime technical support from dedicated experts
- Great for draining or refilling your swimming pool, removing water from your basement or draining shallow flooded areas
| Brand | Champion Power Equipment |
|---|---|
| Country of Origin | Imported |
| Amperage | 0 N/A |
| Body Material | Steel |
| Compatible Pipe Material | None |
| Discharge Connection | None |
| Discharge Diameter | 0.5 in. |
| Discharge Rate at 0 ft. | 158 gpm |
| Discharge Rate at 10 ft. | 0 gpm |
| Engine Brand | Champion Power Equipment |
| Engine Displacement | 212cc |
| Features | Lightweight and portable, Self-priming, Hose Kit, Wheel Kit |
| Fuel Capacity | 3 gal. |
| Horsepower | 0 N/A |
| Hose Diameter | 2 in. |
| Impeller Material | Cast Iron |
| Inlet Connection | Threaded Female |
| Inlet Diameter | 2 in. |
| Maximum Flow Rate | 158 GPM |
| Maximum Head Lift | 92 ft. |
| Maximum Operating Pressure | 0 N/A |
| Maximum Operating Temperature | 85 deg. F |
| Maximum Solids Diameter | 0.5 in. |
| Maximum Suction Lift | 26 ft. |
| Minimum Operating Pressure | 0 N/A |
| Minimum Operating Temperature | 32 deg. F |
| Oil Capacity | 0.5 qt. |
| Power Cord Length | 0 N/A |
| Power Type | Gas |
| Product Height | 19.7 in. |
| Product Length | 25.4 in. |
| Product Weight | 91 lb. |
| Product Width | 22.8 in. |
| Pump Mechanism | Diaphragm |
| Motor Type | OHV engine |
| Voltage | 0 N/A |
| Warranty | 2 Year Limited |
| Manufacturer Part Number | 100742 |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 10 Questions
Newest questions
Q: What is the suction filter made of and how big are the holes in the filter
29 days ago1 Answer
- A: Hello, the filter type is plastic, and can handle solids up to 0.5in. If you have any other questions, please contact our support team at 877-338-0999, support@cpeauto.com, or by using our live chat option available on our website. -Thank you27 days agoHelpful?
Q: what is the model # of this pump
a month ago1 Answer
- A: Hello, the model number to this unit is 100742. If you need any assistance with this unit please contact our support team at 877-338-0999, support@cpeauto.com, or use our live chat option located on our website. -Thank youa month agoHelpful?
Q: Can I get a 30’ at least suction hose instead of the 12’ suction hose?
6 months ago1 Answer
- A: Hello, we apologize, but at this time Champion only offers a 12-foot suction hose. If a longer hose is required, you will need to purchase an aftermarket hose compatible with the unit. Please ensure the hose is a single, continuous length and that all connections are properly sealed to prevent leaks. We do not recommend connecting multiple hoses together. If you have any other questions, please contact our support team at 877-338-0999,support@cpeauto.com, or use our live chat option located on our website. -Thank you6 months agoHelpful?
Q: Would this pump pump water up to 2000 feet with a head of 80 feet? If not, which pump would you recommend.
a year ago1 Answer
- A: Hello, Thank you for reaching out and sharing your feedback with us. We sincerely apologize that we do not currently offer a unit that meets your specific requirements. We understand how important it is to find equipment that aligns with your needs, and we truly regret any inconvenience this may have caused. Please know that your feedback has been shared with our engineering and product development teams for consideration in future designs. Customer input like yours is invaluable as we continue working to improve and expand our product line. If there's anything else we can assist you with in the meantime, please don't hesitate to contact our support team at 877-338-0999 or support@cpeauto.com. -Thank youa year agoHelpful?
Q: Would 2" HDPE 100 PSI pipe work with this pump over 600 ft with max elevation of 50 ft?
Anonymous4 years ago1 Answer
- A: This pump is not an electric-start one. This pump has a total head of 92 feet and a discharge hose length of 25 feet. It will not meet the above requirements. We are sorry about that.4 years agoHelpful?
Q: Will this pump push water 600 ft with a max elevation of 50 ft ? Is this an electric start?
Anonymous4 years ago1 Answer
- A: This pump is not an electric-start one. This pump has a total head of 92 feet and a discharge hose length of 25 feet. It will not meet the above requirements. We are sorry about that.4 years agoHelpful?
Q: What would I need to use this as an emergency fire hose pump drawing water from my pool in case of a brush fire?
5 years ago1 Answer
- A: We don't have instructions ourselves, but we do know people use these types of pumps for purposes like this. Usually they are two and three-inch water pumps, but this works on the same principles which means it should also throw water a good distance with the proper attachments. We don't have a list of what you need to buy as this is not our intended application, however, there are plenty of DIY websites and YouTube videos that cover what is required to do this with the pump. Usually there is a step down in size from 2" to 1" for example with a firehose attachment on the end of the hose. Thank you.5 years agoHelpful?
Q: Will this pump work for removing sewer shower, and sink water?
5 years ago2 Answers
- A: The unit can drain shallow flooded areas. It has a delivery volume of up to 158 gallons per minute and is capable of passing solid waste up to 1/2 inch in diameter. With a 2-inch NPT inlet outlet, this unit has a total head of 92 feet and a suction head of 26 feet. Thank you.5 years agoHelpful?
Q: Will this unit pump water 250 across flat ground
5 years ago1 Answer
- A: This pump has a maximum delivery volume of up to 158 gal. per minute with a total head of 92 feet and a suction head of 26 feet.5 years agoHelpful?
Q: Can I pump a neat cement slurry with this pump
5 years ago1 Answer
- A: This will not work on cement. Salt, sludge, sewer, sea, or any other type of water containing solid material should be put through the pump. Thank you.5 years agoHelpful?
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 10 Questions
Newest questions
Q: What is the suction filter made of and how big are the holes in the filter
29 days ago1 Answer
- A: Hello, the filter type is plastic, and can handle solids up to 0.5in. If you have any other questions, please contact our support team at 877-338-0999, support@cpeauto.com, or by using our live chat option available on our website. -Thank you27 days agoHelpful?
Q: what is the model # of this pump
a month ago1 Answer
- A: Hello, the model number to this unit is 100742. If you need any assistance with this unit please contact our support team at 877-338-0999, support@cpeauto.com, or use our live chat option located on our website. -Thank youa month agoHelpful?
Q: Can I get a 30’ at least suction hose instead of the 12’ suction hose?
6 months ago1 Answer
- A: Hello, we apologize, but at this time Champion only offers a 12-foot suction hose. If a longer hose is required, you will need to purchase an aftermarket hose compatible with the unit. Please ensure the hose is a single, continuous length and that all connections are properly sealed to prevent leaks. We do not recommend connecting multiple hoses together. If you have any other questions, please contact our support team at 877-338-0999,support@cpeauto.com, or use our live chat option located on our website. -Thank you6 months agoHelpful?
Q: Would this pump pump water up to 2000 feet with a head of 80 feet? If not, which pump would you recommend.
a year ago1 Answer
- A: Hello, Thank you for reaching out and sharing your feedback with us. We sincerely apologize that we do not currently offer a unit that meets your specific requirements. We understand how important it is to find equipment that aligns with your needs, and we truly regret any inconvenience this may have caused. Please know that your feedback has been shared with our engineering and product development teams for consideration in future designs. Customer input like yours is invaluable as we continue working to improve and expand our product line. If there's anything else we can assist you with in the meantime, please don't hesitate to contact our support team at 877-338-0999 or support@cpeauto.com. -Thank youa year agoHelpful?
Q: Would 2" HDPE 100 PSI pipe work with this pump over 600 ft with max elevation of 50 ft?
Anonymous4 years ago1 Answer
- A: This pump is not an electric-start one. This pump has a total head of 92 feet and a discharge hose length of 25 feet. It will not meet the above requirements. We are sorry about that.4 years agoHelpful?
Q: Will this pump push water 600 ft with a max elevation of 50 ft ? Is this an electric start?
Anonymous4 years ago1 Answer
- A: This pump is not an electric-start one. This pump has a total head of 92 feet and a discharge hose length of 25 feet. It will not meet the above requirements. We are sorry about that.4 years agoHelpful?
Q: What would I need to use this as an emergency fire hose pump drawing water from my pool in case of a brush fire?
5 years ago1 Answer
- A: We don't have instructions ourselves, but we do know people use these types of pumps for purposes like this. Usually they are two and three-inch water pumps, but this works on the same principles which means it should also throw water a good distance with the proper attachments. We don't have a list of what you need to buy as this is not our intended application, however, there are plenty of DIY websites and YouTube videos that cover what is required to do this with the pump. Usually there is a step down in size from 2" to 1" for example with a firehose attachment on the end of the hose. Thank you.5 years agoHelpful?
Q: Will this pump work for removing sewer shower, and sink water?
5 years ago2 Answers
- A: The unit can drain shallow flooded areas. It has a delivery volume of up to 158 gallons per minute and is capable of passing solid waste up to 1/2 inch in diameter. With a 2-inch NPT inlet outlet, this unit has a total head of 92 feet and a suction head of 26 feet. Thank you.5 years agoHelpful?
Q: Will this unit pump water 250 across flat ground
5 years ago1 Answer
- A: This pump has a maximum delivery volume of up to 158 gal. per minute with a total head of 92 feet and a suction head of 26 feet.5 years agoHelpful?
Q: Can I pump a neat cement slurry with this pump
5 years ago1 Answer
- A: This will not work on cement. Salt, sludge, sewer, sea, or any other type of water containing solid material should be put through the pump. Thank you.5 years agoHelpful?
Similar Items
Reviews
- purchase
- satisfaction
- price
- setup
- quality
- instructions
- ease of use
- large
1 to 4 of 922 Reviews .
1 – 4 of 922 Reviews
Most Recent
Anonymous
Saskatchewan
Review 1
Age25 to 34
GenderMale
5 out of 5 stars.
Great Pump!
2 months ago
Bought this pump to move water away from my house to prevent my basement flooding. It moves a lot of water very quickly.
Yes, I recommend this product.
Originally posted on Champion Power Equipment
King, North Carolina
Reviews 3
5 out of 5 stars.
Hard working and efficient operation.
2 months ago
Very happy with the performance of this Champion pump. I put 30 hours on it over the course of a week to fill my pond from a creek. I bought a longer suction hose to combine with the included hose. I ran a 2 inch discharge hose 175 feet to get the water where I needed it. The pump had no issues sucking or pushing the water that far. Always started on first or second pull. Included wheel kit is a $45 option with comparable pumps. I did my research and couldn’t be more pleased with this workhorse of a pump.
SweepstakesYes
Yes, I recommend this product.
Cam60
Rochester,NY
Review 1
Age65 or over
GenderMale
5 out of 5 stars.
Life saver!
2 months ago
What a life saver! Had a flood in my basement from a blown water heater. The wheels made it easy to move around. Easy to start and prime. I would surely recommend.
Originally posted on Champion Power Equipment
Laketool
Prince Albert, Saskatchewan
Review 1
Age55 to 64
GenderMale
4 out of 5 stars.
Good pump
3 months ago
This was bought due to its size and being able to move it. It was hard to prime at the start but is a very good pump.
Yes, I recommend this product.
Originally posted on Champion Power Equipment