Fimco ATV-UTV 2.2 cu. ft. Dry Material Spreader with Cover, 2 in. Receiver Mount
$649.99
Fimco ATV-UTV 2.2 cu. ft. Dry Material Spreader with Cover, 2 in. Receiver Mount
Fimco ATV-UTV 2.2 cu. ft. Dry Material Spreader with Cover, 2 in. Receiver Mount
Item # 101461799
$649.99
Neighbor’s Club Members earn points with purchases.
Fimco ATV-UTV 2.2 cu. ft. Dry Material Spreader with Cover, 2 in. Receiver Mount
Item # 101461799
The FIMCO 2.2 Cu. Ft. Dry Material Spreader with 2" Receiver Mount is the ultimate "set it and forget it" solution for property owners who demand professional results with zero hassle. By mounting directly to your truck, ATV, UTV, or SUV's hitch, this unit transforms your vehicle into a precision application powerhouse. From seeding a food plot in the backwoods to de-icing a long driveway before work, this spreader is built to perform in the toughest conditions. No more hitching up trailers or worrying about backing up in tight spaces. The heavy-duty steel universal receiver mount slides directly into your standard 2" receiver, keeping the unit high, dry, and easy to maneuver. Includes a custom-fit rain cover. Don't let a sudden drizzle ruin your expensive fertilizer or turn your salt into a clumped mess, keep your materials dry and flowable regardless of the forecast. The fan-cooled motor is designed for consistent, high-speed distribution, allowing you to adjust your spread width from 5 to 45 feet with ease. The 2.2 cubic foot polyethylene hopper holds up to 145 lbs. of material and is completely resistant to the corrosive effects of salt and harsh chemicals. While others use plastic, FIMCO uses a 6-blade stainless steel fan to ensure a uniform spread pattern and a lifetime of rust-free service. Why choose the receiver mount over a trailer? Mobility. This setup allows you to access tight trails, steep inclines, and narrow gated areas where a trailer simply cannot go. Plus, with the included rain cover, you have the peace of mind that your material is protected from wind and moisture while you're in transit.
- Adjustable slide gate allows you to control the rate of material used
- Compact molded polymer hopper holds 145 lbs of material
- Made for these types of dry material applications: fertilizer, seed, bait, pellets, ice melting pellets and granular insecticides, fungicides and herbicides
- Stainless steel radial fan is spot welded and designed for precise material distribution
- Thick steel mounting tube fits 2 inch receiver hitch
- Variable speed controller allows you to monitor width of material spread
| Brand | Fimco |
|---|---|
| Country of Origin | Made in USA |
| Brand Compatibility | Universal |
| Coverage Area | 50 ft. |
| Features | Spread width: 5' to 45'; Hopper Capacity: 2.2 Cubic Foot, Variable Speed Control, 2" Receiver Hitch and Dust Cover |
| Frame Material | Steel |
| Hopper Capacity | 2.2 cu. ft. |
| Hopper Height | 16 in. |
| Hopper Material | Poly |
| Hopper Weight Capacity | 145 lb. |
| Maximum Spreading Speed | 10 mph |
| Maximum Spreading Width | 45 ft. |
| Minimum Spreading Speed | 3 mph |
| Minimum Spreading Width | 5 ft. |
| Model Compatibility | Universal |
| Package Quantity | 1 |
| Primary Color | Black |
| Product Height | 22 in. |
| Product Length | 29 in. |
| Product Weight | 55 lb. |
| Product Width | 21 in. |
| Receiver Opening Size | |
| Spreader Type | Receiver Mounted |
| Warranty | 1 yr Consumer / 90 day Commercial |
| Manufacturer Part Number | 5302957 |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 6 of 6 Questions
Newest questions
Q: how long is the wiring harness and controller wire that connect together? I'm going to use the spreader with my dual cab GMC pickup with a 6' box?
13 days ago1 Answer
- A: The spreader comes with a total 20-foot wiring harness assembly, which is split into two 10-foot sections: Controller to Spreader Motor Cable: 10 feet Controller to Battery Cable (with alligator clips): 10 feet Will it reach in a dual cab GMC with a 6' box? Yes, but it depends on how you route it to your power source: Routing to the Under-Hood Battery (~18–20 ft needed): From a hitch-mounted spreader, through the 6' truck bed, into a dual-cab (crew cab) interior to mount the dial controller near the driver, and through the firewall to the front battery will be very tight or slightly short depending on how clean you route the wires.11 days agoHelpful?
Q: DOES POWER CORD OR CORDS COME WITH UNIT
a month ago1 Answer
- A: Yes, the full wiring harness comes standard with the complete spreader unit. Because the variable speed controller (VSC-10) handles both the on/off function and the dial settings, it relies on a specific two-part wiring kit to get power safely from your vehicle's battery to the spreader motor. Here is exactly what is included out of the box to connect the power: Battery Power Cable: A wiring harness with alligator clips that connects directly to your vehicle's 12V battery and runs to where you mount the VSC-10 controller. Motor Connection Cable: A separate wiring harness that runs from the VSC-10 controller back to the 12-volt motor on the spreader unit.a month agoHelpful?
Q: Can it be used for rock salt?
3 months ago1 Answer
- AI-generated, Human-approvedA: Yes, this spreader is designed for ice melting pellets and is resistant to the corrosive effects of salt. It is ideal for de-icing driveways and features a stainless steel fan to ensure rust-free service when handling these materials.3 months agoHelpful?
Q: Should I expect any issues using this spreader on the front end of my Side by side?
4 months ago1 Answer
- A: Hello, thank you for your question. You can typically use this spreader on the front of a side-by-side as long as your vehicle has a front 2-in. receiver hitch and adequate clearance. The unit mounts directly into a standard receiver and connects to a 12-V battery. Just keep in mind the added weight of the hopper when full and ensure it does not interfere with front accessories such as a winch or bumper.4 months agoHelpful?
Q: what is the amperage draw in operation?
4 months ago1 Answer
- A: The Fimco 2.2 cu. ft. Dry Material Spreader (Manufacturer Part Number 5302957) typically draws 5 to 10 Amps during standard operation.4 months agoHelpful?
Q: Will material stop flowing when power is interrupted ? (gate close automatically???) or some other method.
4 months ago1 Answer
- AI-generated, Human-approvedA: The spreader features an adjustable slide gate that allows you to control the rate of material flow. However, the product information does not specify whether the gate closes automatically when power is interrupted.4 months agoHelpful?
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 6 of 6 Questions
Newest questions
Q: how long is the wiring harness and controller wire that connect together? I'm going to use the spreader with my dual cab GMC pickup with a 6' box?
13 days ago1 Answer
- A: The spreader comes with a total 20-foot wiring harness assembly, which is split into two 10-foot sections: Controller to Spreader Motor Cable: 10 feet Controller to Battery Cable (with alligator clips): 10 feet Will it reach in a dual cab GMC with a 6' box? Yes, but it depends on how you route it to your power source: Routing to the Under-Hood Battery (~18–20 ft needed): From a hitch-mounted spreader, through the 6' truck bed, into a dual-cab (crew cab) interior to mount the dial controller near the driver, and through the firewall to the front battery will be very tight or slightly short depending on how clean you route the wires.11 days agoHelpful?
Q: DOES POWER CORD OR CORDS COME WITH UNIT
a month ago1 Answer
- A: Yes, the full wiring harness comes standard with the complete spreader unit. Because the variable speed controller (VSC-10) handles both the on/off function and the dial settings, it relies on a specific two-part wiring kit to get power safely from your vehicle's battery to the spreader motor. Here is exactly what is included out of the box to connect the power: Battery Power Cable: A wiring harness with alligator clips that connects directly to your vehicle's 12V battery and runs to where you mount the VSC-10 controller. Motor Connection Cable: A separate wiring harness that runs from the VSC-10 controller back to the 12-volt motor on the spreader unit.a month agoHelpful?
Q: Can it be used for rock salt?
3 months ago1 Answer
- AI-generated, Human-approvedA: Yes, this spreader is designed for ice melting pellets and is resistant to the corrosive effects of salt. It is ideal for de-icing driveways and features a stainless steel fan to ensure rust-free service when handling these materials.3 months agoHelpful?
Q: Should I expect any issues using this spreader on the front end of my Side by side?
4 months ago1 Answer
- A: Hello, thank you for your question. You can typically use this spreader on the front of a side-by-side as long as your vehicle has a front 2-in. receiver hitch and adequate clearance. The unit mounts directly into a standard receiver and connects to a 12-V battery. Just keep in mind the added weight of the hopper when full and ensure it does not interfere with front accessories such as a winch or bumper.4 months agoHelpful?
Q: what is the amperage draw in operation?
4 months ago1 Answer
- A: The Fimco 2.2 cu. ft. Dry Material Spreader (Manufacturer Part Number 5302957) typically draws 5 to 10 Amps during standard operation.4 months agoHelpful?
Q: Will material stop flowing when power is interrupted ? (gate close automatically???) or some other method.
4 months ago1 Answer
- AI-generated, Human-approvedA: The spreader features an adjustable slide gate that allows you to control the rate of material flow. However, the product information does not specify whether the gate closes automatically when power is interrupted.4 months agoHelpful?
Similar Items
-
-
-
-
-
-
-
-
-
-
Top Rated
-
-
Items You May Like
Customers Also Bought
Reviews
1 to 4 of 12 Reviews .
1 – 4 of 12 Reviews
Most Recent
Mount Pleasant Arkansas
Review 1
2 out of 5 stars.
Poor craftsmanship
a month ago
The 2” bar for the receiver has so much paint on it that it does not slide into the receiver. Even down to bare metal it still doesn’t fit. Craftsmanship isn’t the best. The adjuster lever came in bent to the point it wouldn’t life into its slot. Too much money for something that isn’t great right out of the box.
No, I do not recommend this product.
Response from Fimco Industries:
a month ago
Fimco Industries
Thank you for bringing these issues to our attention. I am very sorry to hear that your experience with our 2.2 cu. ft. Dry Material Spreader has been so frustrating. We hold our products to a high standard. We would like to resolve this for you, please reach out to our customer support team directly at 800-831-0027. We value your feedback, as it helps us identify where our quality control process needs improvement. We look forward to getting this sorted out for you.
Worthington, Massachusetts
Review 1
4 out of 5 stars.
Good but wish the gate had a remote open/close
2 months ago
So far I have used the spreader to put down 150 lbs of urea and 400 lbs of Kmag on my blueberry fields. Out of the box I had to slightly adjust the motor position to center the shaft in the hole, and I had to bend the side gate to get it to stay in position. Although this is part of the instructions, the amount that I had to bend the gate was a little concerning. Everything else seemd to be aligned and fasteners tight. After installation came calibration of the application rate. I tried using the provided chart but found it to be pretty useless even for the urea. I ended up doing trial and error starting at setting of 1 and error and got it dialed in close enough. I mounted it on my BX2200 using the ATV mount slide into a 2" receiver mounted on the 3 point hitch. Before my next application I am going to drill another hole in the ATV mount to get it closer to the tractor to improve stability. The only real negative is that the gate open/close requires me to get off the tractor. So a little bit extra spills out at each start and stop. I wish they made an option to automate this, but for the price, I didn't find any mounted spreaders with this feature that also had the adjustable speed impeller.
SweepstakesYes
Yes, I recommend this product.
Response from Fimco Industries:
a month ago
Fimco Industries
Thank you for taking the time to share such a thorough and honest review of your Fimco Dry Material Spreader. We love seeing our equipment put to good work in the field—it sounds like your blueberries are in good hands with that urea and K-Mag application! We really appreciate you highlighting your experience with the setup, calibration, and your custom mounting setup on your tractor. Your note about having to bend the slide gate more than expected is great feedback for our quality team to keep an eye on. Regarding your feedback about a remote or automated gate open/close option: you hit the nail on the head at the end of your review. Our goal with this model is to provide a heavy-duty, reliable spreader with premium features—like the adjustable speed impeller—while keeping the price point accessible. Integrating an electronic or motorized remote gate mechanism out of the box would significantly increase the production and retail cost of the unit. Thank you again for the feedback, the engineering insights, and for choosing Fimco. Safe farming out there!
Review 1
5 out of 5 stars.
Fimco spreader
4 months ago
Seems to work well. I’ve used it on rough ground and it seems to maintain accurate distribution
SweepstakesYes
Yes, I recommend this product.
NE Ohio
Review 1
4 out of 5 stars.
Good, could be better
4 months ago
4 of 5 stars for 2 reasons: main issue is they used a different wiring harness than the sprayer, so had to splice the harness for alternate power supply vs battery terminal clamps. Second issue is the motor isn't strong enough to spin the shaft with a small agitator. Gravity feed is typically fine, but occasional clogs and uneven feed with no agitation (spreading preemergent and nitrogen granules). Overall nice setup and much more efficient than tow behind spreaders.
Yes, I recommend this product.