Weasler Universal Friction Clutch, 1-3/8 in. x 6-Spline
Weasler Universal Friction Clutch, 1-3/8 in. x 6-Spline
Item # 271211
$329.99
or
or
Get everything you need
Neighbor’s Club Members earn points with purchases.
$329.99
or
or
$55/mo.† suggested payments with 6 Months Financing or earn $16 in Rewards+ on this purchase.
Shopping at
Grassland (franklin) TN
Delivery to
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Get everything you need
Neighbor’s Club Members earn points with purchases.
Keep your machines in working order with the Weasler Universal Friction Clutch. The steel construction prevents damage to the torque limiter from everyday use and heavy loads for long-lasting functionality. The efficient design of the clutch dissipates heat quickly to prevent overheating and reduce potential accidents.
For additional information on this product, please see the Product Documents section for all downloadable user manuals, installation guides, brochures and warranty statements.
- Clutch has a 1-3/8 in. 6 spline bore quick-disconnect connection and a 1-3/8 in. 6 spline spindle connection
- Made for a clutch setting of 8000 in./lb.
- Patented design dissipates heat quickly
- Steel construction gives the torque limiter durability
- Outer diameter of 7.08 in.
| Brand | Weasler |
|---|---|
| Country of Origin | Made in USA |
| Brand Compatibility | Universal |
| Model Compatibility | 1.375 in. 6 Spline |
| Package Quantity | 1 |
| Primary Material | Steel |
| Product Height | 7.087 in. |
| Product Length | 7.35 in. |
| Product Weight | 17.38 lb. |
| Product Width | 7.087 in. |
| Tractor PTO Part Type | Clutch |
| Manufacturer Part Number | 560-6006 |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 9 of 9 Questions
Newest questions
Q: Have a 1988 John Deere 650 tractor. the horsepower is 17 to 19 So I see him tonight at 6:30 running the motor between 2000 and 2300 RPMs Is this slip clutch proper for my size of equipment? I have a 4 foot brush hog.
9 months ago1 Answer
- A: Hi Neighbor- Clutch has a 1-3/8 in. 6 spline bore quick-disconnect connection and a 1-3/8 in. 6 spline spindle connection Made for a clutch setting of 8000 in./lb. Please check the owners manual or work with manufacturer directly for fit9 months agoHelpful?
Q: Will this clutch work with a 55 HP tractor connected to a rotary cutter, that was previously using a slip clutch (splined shaft on both sides)?
3 years ago1 Answer
- A: Compatibility: 1.375 in. 6 Spline For more information or to check the compatibility with your specific model of tractor, please reach out to the manufacturer for more information: 262.338.2161 or https://www.weasler.com/contact/3 years agoHelpful?
Q: Do you have a link to the correct product manual for this clutch which has springs? The product manual link you have on this page, is for a clutch with spacers, not springs. Thanks.
4 years ago1 Answer
- A: Here is the .pdf from the manufacturer's website https://www.weasler.com/wp-content/uploads/2019/03/Service-Instructions-I-Type-Overrunning-Friction-Clutch.pdf4 years agoHelpful?
Q: is this compatible with the Countryline 5 foot round back rotary (brush hog) mower? This one is splined which is necessary splined or round shaft?
5 years ago1 Answer
- A: We would need more information to answer your question. Please contact the vendor to discuss your inquiries 262.338.2161or visit their website https://www.weasler.com/contact/5 years agoHelpful?
Q: Why is this to be installed on the implement and not the tractor PTO? I have it installed this way (on the PTO output). Is it for safety reasons or am I going to damage my tractor?
7 years ago1 Answer
- A: The reason clutches like this one are not to be put onto the tractor end is because the springs and hardware on them are considered catch points. A catch point is something that could grab onto other things and pull them in. The note is a warning given for this safety reason and needs to be followed.7 years agoHelpful?
Q: So the rating is 68 HP. Would this protect a 55 HP tractor using a 6 ft rotary cutter?
7 years ago1 Answer
- A: Please see the manufacturer's response below: The 560-6006 is set slip at a torque of 7966 in-lbs which is 68 HP at 540 rpms. The clutch rating is purposely set a little higher than the normal operating requirements of the implement it is on. This is so that the implement can use the full amount of power it needs but when something comes into the drive shaft system from either the tractor or the implement the clutch will slip to reduce that torque. What the torque setting on the clutch needs to be is dependent on what is required to run the implement and what would protect the weakest member of the implement that is in the drive train system. We have not done any testing on what other spring heights for this clutch will produce what torques. The 7966 in-lbs setting is based on the most common OEM usage items for this clutch. If your customer is seeing the clutch slipping too often then they can tighten the springs a little to help stop the excess slipping. For adjusting the springs it is recommended to turn each bolt ½ of a turn and retry the machine. It is important to do this change on every spring of the clutch. If the clutch is not slipping they can loosen the springs by doing the same ½ turn and checking how it is working.7 years agoHelpful?
Q: Is this clutch installed at tractor shaft
7 years ago1 Answer
- A: The clutch would go on the implement end of the D/L.7 years agoHelpful?
Q: Is there a replacement disc available
7 years ago1 Answer
- A: Yes. The manufacturer part number for a replacement disc is 970-4140. Please visit your local Tractor Supply for special order assistance.7 years agoHelpful?
Q: is there a HP rating for this clutch?
8 years ago1 Answer
- A: The rating is 68 HP.8 years agoHelpful?
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 9 of 9 Questions
Newest questions
Q: Have a 1988 John Deere 650 tractor. the horsepower is 17 to 19 So I see him tonight at 6:30 running the motor between 2000 and 2300 RPMs Is this slip clutch proper for my size of equipment? I have a 4 foot brush hog.
9 months ago1 Answer
- A: Hi Neighbor- Clutch has a 1-3/8 in. 6 spline bore quick-disconnect connection and a 1-3/8 in. 6 spline spindle connection Made for a clutch setting of 8000 in./lb. Please check the owners manual or work with manufacturer directly for fit9 months agoHelpful?
Q: Will this clutch work with a 55 HP tractor connected to a rotary cutter, that was previously using a slip clutch (splined shaft on both sides)?
3 years ago1 Answer
- A: Compatibility: 1.375 in. 6 Spline For more information or to check the compatibility with your specific model of tractor, please reach out to the manufacturer for more information: 262.338.2161 or https://www.weasler.com/contact/3 years agoHelpful?
Q: Do you have a link to the correct product manual for this clutch which has springs? The product manual link you have on this page, is for a clutch with spacers, not springs. Thanks.
4 years ago1 Answer
- A: Here is the .pdf from the manufacturer's website https://www.weasler.com/wp-content/uploads/2019/03/Service-Instructions-I-Type-Overrunning-Friction-Clutch.pdf4 years agoHelpful?
Q: is this compatible with the Countryline 5 foot round back rotary (brush hog) mower? This one is splined which is necessary splined or round shaft?
5 years ago1 Answer
- A: We would need more information to answer your question. Please contact the vendor to discuss your inquiries 262.338.2161or visit their website https://www.weasler.com/contact/5 years agoHelpful?
Q: Why is this to be installed on the implement and not the tractor PTO? I have it installed this way (on the PTO output). Is it for safety reasons or am I going to damage my tractor?
7 years ago1 Answer
- A: The reason clutches like this one are not to be put onto the tractor end is because the springs and hardware on them are considered catch points. A catch point is something that could grab onto other things and pull them in. The note is a warning given for this safety reason and needs to be followed.7 years agoHelpful?
Q: So the rating is 68 HP. Would this protect a 55 HP tractor using a 6 ft rotary cutter?
7 years ago1 Answer
- A: Please see the manufacturer's response below: The 560-6006 is set slip at a torque of 7966 in-lbs which is 68 HP at 540 rpms. The clutch rating is purposely set a little higher than the normal operating requirements of the implement it is on. This is so that the implement can use the full amount of power it needs but when something comes into the drive shaft system from either the tractor or the implement the clutch will slip to reduce that torque. What the torque setting on the clutch needs to be is dependent on what is required to run the implement and what would protect the weakest member of the implement that is in the drive train system. We have not done any testing on what other spring heights for this clutch will produce what torques. The 7966 in-lbs setting is based on the most common OEM usage items for this clutch. If your customer is seeing the clutch slipping too often then they can tighten the springs a little to help stop the excess slipping. For adjusting the springs it is recommended to turn each bolt ½ of a turn and retry the machine. It is important to do this change on every spring of the clutch. If the clutch is not slipping they can loosen the springs by doing the same ½ turn and checking how it is working.7 years agoHelpful?
Q: Is this clutch installed at tractor shaft
7 years ago1 Answer
- A: The clutch would go on the implement end of the D/L.7 years agoHelpful?
Q: Is there a replacement disc available
7 years ago1 Answer
- A: Yes. The manufacturer part number for a replacement disc is 970-4140. Please visit your local Tractor Supply for special order assistance.7 years agoHelpful?
Q: is there a HP rating for this clutch?
8 years ago1 Answer
- A: The rating is 68 HP.8 years agoHelpful?
Similar Items
-
-
-
-
-
-
Top Rated
-
Top Rated
-
-
-
-
Top Rated
-
Items You May Like
-
-
-
-
-
-
-
-
-
Top Rated
-
-
-
Top Rated
Customers Also Bought
-
-
Top Rated
-
-
-
-
-
-
-
-
Top Rated
-
-
Reviews
Summary of Reviews
The universal friction clutch is effective at preventing damage to powerful equipment by allowing the clutch to slip when encountering high resistance, rather than breaking other components. It is eas...
- English
- German
- French
- Spanish
- Portuguese
- Italian
- Korean
- Chinese
- Japanese
- Arabic
Most Helpful Favorable Review
5 out of 5 stars.
Works as is should
11 years ago
I bought this slip clutch because I was mowing a very rough field and I kept breaking shear bolts every time I hit a high spot, like once every 5 minutes. I put the slip clutch between the tractor and the brush hog and when I hit a high spot, the clutch slips, the shear bolt doesn't break, and I can keep right on mowing.
24 people found this helpful
Show Reviews:
Most Helpful Critical Review
1 out of 5 stars.
A lot of money for a product that cannot be repair
8 years ago
You cannot Buy replacement pads for this product so you have to buy a new one when it wears out
3 people found this helpful
Show Reviews:
- purchase
- price
- installation
- instructions
- satisfaction
- quality
- reliable
- rust
1 to 4 of 69 Reviews .
1 – 4 of 69 Reviews
Most Recent
Review 1
2 out of 5 stars.
$300 throw away item ?
8 months ago
The friction discs eventually wear out. Tractor Supply does not carry the replacement discs for this clutch so you have to contact the manufacturer, locate one of their distributers, and have them order them for you. The replacement discs are expensive and the process is time consuming. The discs available online from online retailers are not the same exact inside diameter dimension for this. Tractor Supply should stock the replacement discs. I guess the figure that people will just buy another one which is what I had to do to finish mowing my pastures. I couldn't wait weeks for the discs. Also, the manufacturer's manual on the TS website is for a different clutch with no springs. The clutch needs to be adjusted periodically. The manual is completely useless for the product.
No, I do not recommend this product.
Review 1
2 out of 5 stars.
Meh
a year ago
Does what it's supposed to. But 3 bills for a $80 clutch is foolish. Good luck finding the replacement friction disks.
at home
Reviews 3
5 out of 5 stars.
It works!
a year ago
It works like it supposed to work
SweepstakesYes
Yes, I recommend this product.
Review 1
4 out of 5 stars.
Good quality. No more sheared bolts,
2 years ago
I sheared 4 grade 5 bolts running my PTO stump grinder. I purchased this clutch, and it slips like it should. The only issue is the bolts loosened in the first 20 minutes of use causing me to have to make some adjustments early on. I believe it was set too low when i purchased it.
I do not believe it should cost 300 dollars though.
Yes, I recommend this product.