Weasler Universal Friction Clutch, 1-3/8 in., Round Both Ends
$299.99
Weasler Universal Friction Clutch, 1-3/8 in., Round Both Ends
Weasler Universal Friction Clutch, 1-3/8 in., Round Both Ends
Item # 27120399
$299.99
or
or
Get everything you need
Neighbor’s Club Members earn points with purchases.
$299.99
or
or
$50/mo.† suggested payments with 6 Months Financing or earn $14 in Rewards+ on this purchase.
Shopping at
Grassland (franklin) TN
Delivery to
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Get everything you need
Neighbor’s Club Members earn points with purchases.
Keep your machines in working order with the Weasler Universal Friction Clutch. The steel construction prevents damage to the torque limiter from everyday use and heavy loads for long-lasting functionality. The efficient design of the clutch dissipates heat quickly to prevent overheating and reduce potential accidents.
For additional information on this product, please see the Product Documents section for all downloadable user manuals, installation guides, brochures and warranty statements.
- Clutch has a round bore pin connection and 1-3/8 in. round spindle with a 1/2 in. pin hole connection
- Made for a clutch setting of 8000 in./lb.
- Patented design dissipates heat quickly
- Steel construction gives the torque limiter durability
- Outer diameter of 7.08 in.
| Brand | Weasler |
|---|---|
| Country of Origin | Made in USA |
| Brand Compatibility | Universal |
| Model Compatibility | Universal |
| Package Quantity | 1 |
| Primary Material | Steel |
| Product Height | 7.087 in. |
| Product Length | 7.35 in. |
| Product Weight | 17.52 lb. |
| Product Width | 7.087 in. |
| Tractor PTO Part Type | Clutch |
| Manufacturer Part Number | 560-6022 |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 10 Questions
Newest questions
Q: Can you purchase replacement friction discs for this clutch? if so, where? Part #? It is not listed on the manual on the TSC website listing.
9 months ago1 Answer
- A: Hello Neighbor, Replacement parts for this clutch are not currently available through our website. Please contact your local TSC store about potentially special ordering the needed part through the manufacturer.9 months agoHelpful?
Q: Why is shear pin hole Not 1/2 inch and has to be drilled out on both sides?
2 years ago1 Answer
- A: Please watch the video under the item on the TSC website to better answer your question.2 years agoHelpful?
Q: Can you purchase replacement friction discs for this clutch? if so, where? Part #?
3 years ago1 Answer
- A: Please refer to the attached manual https://media.tractorsupply.com/is/content/TractorSupplyCompany/tsc/product/2/71/20/3/271203_Man1.pdf3 years agoHelpful?
Q: What tractor pto hp and rotary cutter gearbox Hp is this rated for.
5 years ago1 Answer
- A: Fits Universal Friction Clutch, 1-3/8 in. Round Both Ends, Clutch Setting 8,000 in./lb.5 years agoHelpful?
Q: will this work on cub cadet GT2542
5 years ago1 Answer
- A: Fits: Universal Friction Clutch, 1-3/8 in. Round Both Ends, Clutch Setting 8,000 in./lb.5 years agoHelpful?
Q: Will this fit on the gearbox of a Countyline 6' rotary cutter mdl RC6, tractor supply #2127256.
5 years ago2 Answers
- A: We did add that to our rotary finish cutter 6' that was bought from Tractor supply. Not sure of the model you specified if it matches mine or not. But seems to work ok.5 years agoHelpful?
Q: Will this work on the County Line 5' Brush cutter that originally had shear pin?
6 years ago1 Answer
- A: The 560-6022 clutch ships at a preset torque of 8.000 in-lbs. If they see the clutch slipping frequently they can adjust the spring height to change the torque setting. When adjusting the spring heights all the springs need to be adjusted to the same height. Making the springs shorter will increase the torque.6 years agoHelpful?
Q: Will I have to shorten my existing pto shaft when I install this? This looks like it will shorten the telescopic movement.
7 years ago1 Answer
- A: If the driveshaft length was adequate before wanting to add the 560-6022, then yes the shaft should be shortened. You will need to shorten each side of your driveline approx. 4.5”. After shortening the shaft and adding the clutch back on it should be approximately the same length compressed as prior.7 years agoHelpful?
Q: Can these be torqued to less than 8000 in/lbs? That's around a 65 hp pto. My PTO is closer to 32 hp, so I need to torque to around 4000 in/lbs. If they can be torqued to 4k, what would the offset measurement be?
8 years ago1 Answer
- A: These clutches are designed with a torque spec of 8000 in/lbs. It is not designed for any other rating. A clutch is not available for the requested rating.8 years agoHelpful?
Q: What is the spring torque on these? You are supposed to loosen them annually to slip them, so I need to know where to re-torque them. Thanks.
9 years ago1 Answer
- A: There isn't a torque rating. Instead, it has a height rating of 31mm which is where it needs to be reset at.9 years agoHelpful?
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 10 Questions
Newest questions
Q: Can you purchase replacement friction discs for this clutch? if so, where? Part #? It is not listed on the manual on the TSC website listing.
9 months ago1 Answer
- A: Hello Neighbor, Replacement parts for this clutch are not currently available through our website. Please contact your local TSC store about potentially special ordering the needed part through the manufacturer.9 months agoHelpful?
Q: Why is shear pin hole Not 1/2 inch and has to be drilled out on both sides?
2 years ago1 Answer
- A: Please watch the video under the item on the TSC website to better answer your question.2 years agoHelpful?
Q: Can you purchase replacement friction discs for this clutch? if so, where? Part #?
3 years ago1 Answer
- A: Please refer to the attached manual https://media.tractorsupply.com/is/content/TractorSupplyCompany/tsc/product/2/71/20/3/271203_Man1.pdf3 years agoHelpful?
Q: What tractor pto hp and rotary cutter gearbox Hp is this rated for.
5 years ago1 Answer
- A: Fits Universal Friction Clutch, 1-3/8 in. Round Both Ends, Clutch Setting 8,000 in./lb.5 years agoHelpful?
Q: will this work on cub cadet GT2542
5 years ago1 Answer
- A: Fits: Universal Friction Clutch, 1-3/8 in. Round Both Ends, Clutch Setting 8,000 in./lb.5 years agoHelpful?
Q: Will this fit on the gearbox of a Countyline 6' rotary cutter mdl RC6, tractor supply #2127256.
5 years ago2 Answers
- A: We did add that to our rotary finish cutter 6' that was bought from Tractor supply. Not sure of the model you specified if it matches mine or not. But seems to work ok.5 years agoHelpful?
Q: Will this work on the County Line 5' Brush cutter that originally had shear pin?
6 years ago1 Answer
- A: The 560-6022 clutch ships at a preset torque of 8.000 in-lbs. If they see the clutch slipping frequently they can adjust the spring height to change the torque setting. When adjusting the spring heights all the springs need to be adjusted to the same height. Making the springs shorter will increase the torque.6 years agoHelpful?
Q: Will I have to shorten my existing pto shaft when I install this? This looks like it will shorten the telescopic movement.
7 years ago1 Answer
- A: If the driveshaft length was adequate before wanting to add the 560-6022, then yes the shaft should be shortened. You will need to shorten each side of your driveline approx. 4.5”. After shortening the shaft and adding the clutch back on it should be approximately the same length compressed as prior.7 years agoHelpful?
Q: Can these be torqued to less than 8000 in/lbs? That's around a 65 hp pto. My PTO is closer to 32 hp, so I need to torque to around 4000 in/lbs. If they can be torqued to 4k, what would the offset measurement be?
8 years ago1 Answer
- A: These clutches are designed with a torque spec of 8000 in/lbs. It is not designed for any other rating. A clutch is not available for the requested rating.8 years agoHelpful?
Q: What is the spring torque on these? You are supposed to loosen them annually to slip them, so I need to know where to re-torque them. Thanks.
9 years ago1 Answer
- A: There isn't a torque rating. Instead, it has a height rating of 31mm which is where it needs to be reset at.9 years agoHelpful?
Similar Items
-
-
-
-
-
-
-
-
Top Rated
-
-
-
-
Items You May Like
-
-
-
-
-
Top Rated
-
-
-
-
-
-
-
Customers Also Bought
-
Top Rated
-
-
-
-
-
-
-
-
-
-
-
Reviews
Summary of Reviews
This universal PTO clutch is reported to be a highly effective and durable product that protects farm equipment by slipping under heavy loads. Many customers find it easy to install and praise its abi...
- English
- German
- French
- Spanish
- Portuguese
- Italian
- Korean
- Chinese
- Japanese
- Arabic
- installation
- satisfaction
- weight
- purchase
- quality
- gears
- design
- results
1 to 4 of 44 Reviews .
1 – 4 of 44 Reviews
Most Recent
Rochester NH
Review 1
3 out of 5 stars.
Pto shaft and clutch
a year ago
Easy to install
SweepstakesYes
Yes, I recommend this product.
Austin County, Tx
Review 1
2 out of 5 stars.
Not worth the money
2 years ago
Shear pin was too small for a 55 Hp tractor. Found a better quality Friction Clutch at Washington County Tractor for the same price.
SweepstakesYes
Deep East Texas
Review 1
5 out of 5 stars.
Worth it
2 years ago
Really saves on shear pins and time when cutting underbrush.
SweepstakesYes
Yes, I recommend this product.
Hilo
Review 1
5 out of 5 stars.
Works awesome
2 years ago
Works great . Really happy with this product
Yes, I recommend this product.