Traveller Wireless Winch Remote Control
Exclusive
Traveller Wireless Winch Remote Control
Item # 1172307
Stocked & Ready
$44.99
Spend $49.99 to unlock free delivery!
Add a protection plan
Powersport plans are not available in CA & MD.
Get everything you need
Neighbor’s Club Members earn points with purchases.
$44.99
Spend $49.99 to unlock free delivery!
Shopping at
Grassland (franklin) TN
Delivery to
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Add a protection plan
Powersport plans are not available in CA & MD.
Get everything you need
Neighbor’s Club Members earn points with purchases.
Adjust your winch wirelessly from up to 100 ft. away with the Traveller Wireless Winch Remote Control. A visual indicator light shows remote operation. Featuring a large emitter for an improved connection, this winch remote works with winches 8,000 lb. and up.
For additional information on this product, please see the Product Documents section for all downloadable user manuals, installation guides, brochures and warranty statements.
Looking for more information on trailers and towing? Check out our guide to trailer prep in the product documents section.
- Large emitter for better connection
- Working Range: 100 ft.
- Easy plug & play installation
- Visual indicator light shows remote operation
- Use with Traveller winches 8000lb and up
| Brand | Traveller |
|---|---|
| Country of Origin | Imported |
| Compatibility | Traveller 8,000 lb. and up winch |
| Cord Length | 20 in. |
| Maximum Operating Range | 100 ft. |
| Number Of Functions | 2 |
| Primary Material | Copper |
| Product Height | 5.82 in. |
| Product Length | 2.8 in. |
| Product Weight | 0.85 lb. |
| Product Width | 4.1 in. |
| Warranty | 90 Day Limited |
| Wired or Wireless | Wireless |
| Manufacturer Part Number | WSE3R5 |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 212 Questions
Newest questions
Q: can you provide the signal description for each wire color?
18 days ago1 Answer
- A: the standard wire colors and signal descriptions for the Traveller 8K/10K wireless winch remote receiver are: red (+12V power), black (ground), white (winch in/spool in control), yellow (winch out/spool out control), and blue (antenna wire Receiver Wire Functions Red Wire: Connects to a constant +12V positive power source. Black Wire: Connects to the system ground or battery negative. White Wire: Outputs +12V signal when the IN button is pressed on the remote. Yellow Wire: Outputs +12V signal when the OUT button is pressed on the remote. Blue Wire: Acts as the internal/external radio antenna and is not connected to a power source17 days agoHelpful?
Q: I bought a vehicle with a 10,000 lb travelers winch. However they lost the controller. What controller can I use it has a 3 pin male connector on the winch ?
a month ago1 Answer
- A: You can use the Traveller Wireless Winch Remote Control directly from Tractor Supply Company. It is designed specifically for Traveller winches rated at 8,000 lbs and up.a month agoHelpful?
Q: Will this work on a rough country wench
a month ago1 Answer
- A: Designed specifically for Traveller winchesa month agoHelpful?
Q: The description of this wireless remote switch states that it only works with winches of 8000 lb or more, yet it's included as an option for the traveller 2500 lb winch
2 months ago1 Answer
- A: Yes, It can work on a TRAVELLER 2500 lb ATV Winch.2 months agoHelpful?
Q: How do you pair this remote if it has lost sync?
7 months ago1 Answer
- A: This winch comes with a preprogrammed remote and no need to set up. If the signal of the remote control is lost, you can reprogram the remote again. 1) Disconnect the positive and negative terminals to the 12 volt DC battery. Turn on the power button. 2) Connect the winch POSITIVE power line to the positive battery terminal. 3) Push both OUT and IN buttons at the same time and continue to hold, do not release. 4) While continuing the hold both OUT and IN buttons, connect the NEGATIVE power line to the negative battery terminal. 5) The light should remain on, and not flickering. The remote is now programmed. *There is another method with less steps as follows: When the remote control transmitter is replaced, the same type of transmitter is required for pairing. Press the power button, then press IN and OUT buttons at the same time (red light flashing), then turn on receiver for 1-2 seconds, the relay should make a sound that alerts the remote is paired. -Repeat steps if needed. Verify the remote batteries are not weak or drained. Replace Remote Control if issue remains.7 months agoHelpful?
Q: What I need is the three pin male to plug into the existing Three pin female
9 months ago1 Answer
- A: It is a four-pin plug.9 months agoHelpful?
Q: I bought a used vehicle that had a 12,000Lb Travelers 4 pin winch. Is there any reason to believe this wouldn’t work?
10 months ago1 Answer
- A: If the receiver plug can be connected to 12,000 lbs winch, then it can work.10 months agoHelpful?
Q: Will this work on a four pin dump trailer
11 months ago1 Answer
- A: No, this remote can only work with Traveller winches.11 months agoHelpful?
Q: How do i use with a 2500 pound traveler atv winch ? Plug sizes are diffrent ?
a year ago1 Answer
- A: Yes, It can work on a TRAVELLER 2500 lb ATV Winch. Please refer the attached instruction to reconnect the wire between remote and winch in your email.a year agoHelpful?
Q: Can I use more than one remote for one winch
a year ago1 Answer
- A: The wireless remote controls can only control one winch based on a fixed frequency of transmission.a year agoHelpful?
1 - 10 of 212 Questions
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 212 Questions
Newest questions
Q: can you provide the signal description for each wire color?
18 days ago1 Answer
- A: the standard wire colors and signal descriptions for the Traveller 8K/10K wireless winch remote receiver are: red (+12V power), black (ground), white (winch in/spool in control), yellow (winch out/spool out control), and blue (antenna wire Receiver Wire Functions Red Wire: Connects to a constant +12V positive power source. Black Wire: Connects to the system ground or battery negative. White Wire: Outputs +12V signal when the IN button is pressed on the remote. Yellow Wire: Outputs +12V signal when the OUT button is pressed on the remote. Blue Wire: Acts as the internal/external radio antenna and is not connected to a power source17 days agoHelpful?
Q: I bought a vehicle with a 10,000 lb travelers winch. However they lost the controller. What controller can I use it has a 3 pin male connector on the winch ?
a month ago1 Answer
- A: You can use the Traveller Wireless Winch Remote Control directly from Tractor Supply Company. It is designed specifically for Traveller winches rated at 8,000 lbs and up.a month agoHelpful?
Q: Will this work on a rough country wench
a month ago1 Answer
- A: Designed specifically for Traveller winchesa month agoHelpful?
Q: The description of this wireless remote switch states that it only works with winches of 8000 lb or more, yet it's included as an option for the traveller 2500 lb winch
2 months ago1 Answer
- A: Yes, It can work on a TRAVELLER 2500 lb ATV Winch.2 months agoHelpful?
Q: How do you pair this remote if it has lost sync?
7 months ago1 Answer
- A: This winch comes with a preprogrammed remote and no need to set up. If the signal of the remote control is lost, you can reprogram the remote again. 1) Disconnect the positive and negative terminals to the 12 volt DC battery. Turn on the power button. 2) Connect the winch POSITIVE power line to the positive battery terminal. 3) Push both OUT and IN buttons at the same time and continue to hold, do not release. 4) While continuing the hold both OUT and IN buttons, connect the NEGATIVE power line to the negative battery terminal. 5) The light should remain on, and not flickering. The remote is now programmed. *There is another method with less steps as follows: When the remote control transmitter is replaced, the same type of transmitter is required for pairing. Press the power button, then press IN and OUT buttons at the same time (red light flashing), then turn on receiver for 1-2 seconds, the relay should make a sound that alerts the remote is paired. -Repeat steps if needed. Verify the remote batteries are not weak or drained. Replace Remote Control if issue remains.7 months agoHelpful?
Q: What I need is the three pin male to plug into the existing Three pin female
9 months ago1 Answer
- A: It is a four-pin plug.9 months agoHelpful?
Q: I bought a used vehicle that had a 12,000Lb Travelers 4 pin winch. Is there any reason to believe this wouldn’t work?
10 months ago1 Answer
- A: If the receiver plug can be connected to 12,000 lbs winch, then it can work.10 months agoHelpful?
Q: Will this work on a four pin dump trailer
11 months ago1 Answer
- A: No, this remote can only work with Traveller winches.11 months agoHelpful?
Q: How do i use with a 2500 pound traveler atv winch ? Plug sizes are diffrent ?
a year ago1 Answer
- A: Yes, It can work on a TRAVELLER 2500 lb ATV Winch. Please refer the attached instruction to reconnect the wire between remote and winch in your email.a year agoHelpful?
Q: Can I use more than one remote for one winch
a year ago1 Answer
- A: The wireless remote controls can only control one winch based on a fixed frequency of transmission.a year agoHelpful?
1 - 10 of 212 Questions
Similar Items
-
-
-
-
Top Rated
-
-
-
-
-
-
Top Rated
-
-
Reviews
Summary of Reviews
The product offers mixed performance, with some users finding it convenient and functional, while others report frequent malfunctions, water damage issues, and premature failure. The remote's large size is also noted as an inconvenience by some customers. Overall, the product may not be a consistent...
- English
- German
- French
- Spanish
- Portuguese
- Italian
- Korean
- Chinese
- Japanese
- Arabic
Most Helpful Favorable Review
5 out of 5 stars.
Simple to modify for wireless dump trailer control
5 years ago
I used one of these to add wireless control for our PJ dump trailer. It is a power up /power down unit so it needed a motor run signal as well as up & down. That was easily added by using a couple of diodes, a bit of wire and a few connectors. The up/down signal lines trigger the appropriate solenoid and also triggers the motor run on the contactor. A diode between solenoid & contactor keeps the signal from back-feeding & triggering the other solenoid. I've used this configuration for about 3 years now with no problems whatsoever. The range is very good. No problem controlling the dump from the truck cab.
12 people found this helpful
Show Reviews:
Most Helpful Critical Review
1 out of 5 stars.
RECEIVER NOT WATER TIGHT
6 years ago
DO NOT BUY UNLESS YOURE WILLING TO PULL APART THE RECEIVER BOX AND SILICONE IT SO ITS WATER TIGHT!!! I had my winch out in the rain ONE TIME and the wireless receiver filled completely with water and shorted out and left me stranded..
12 people found this helpful
Show Reviews:
Customer Images and Videos
- cordless
- purchase
- wireless feature
- installation
- price
- satisfaction
- packaging
- for the car
1 to 4 of 107 Reviews .
1 – 4 of 107 Reviews
Most Recent
Reviews 2
1 out of 5 stars.
Jerry
a month ago
this is the second one in a year it worked for the first 3 pulls and then just quit got to take back
Review 1
3 out of 5 stars.
Your guess is as good as mine.
2 months ago
The first one we bought was broken and we ran out of time to set up the replacement so I have no idea how or if it works.
KY
Review 1
4 out of 5 stars.
Needs a clip connector instead of a ring lug.
10 months ago
Works great! It is a huge time saver and makes operating the winch much more efficient as I longer have to walk from the work area to the wired controller. I would have given it 5 stars if it weren't for the fact that the receiver unit requires a nut to be removed and reinstalled on negative electrical connection on the winch motor to install the ring lug connector on the remote receiver. I don't feel the plastic housing is durable enough to remain with the winch, either on my vehicle or on my trailer for a long period of time. Also, there is no convenient way to securely mount the receiver to the winch without placing it in harms way in the event of the rope/wire snapping back and without modifying the housing of the winch.
SweepstakesYes
Sanford NC
Review 1
5 out of 5 stars.
Transmitter good, receiver connector limited
11 months ago
The transmitter is well built and has good range. The receiver is limited because it comes with a custom connector that doesn't seem to match anything.
SweepstakesYes
No, I do not recommend this product.