ToolTuff Direct Overrunning Clutch, 1-3/8x6 to 1-3/8x6, 75 HP, Quick Release
$59.99
ToolTuff Direct Overrunning Clutch, 1-3/8x6 to 1-3/8x6, 75 HP, Quick Release
ToolTuff Direct Overrunning Clutch, 1-3/8x6 to 1-3/8x6, 75 HP, Quick Release
Item # 193001699
$59.99
Neighbor’s Club Members earn points with purchases.
ToolTuff Direct Overrunning Clutch, 1-3/8x6 to 1-3/8x6, 75 HP, Quick Release
Item # 193001699
$59.99
New Cardmembers earn a $20 Reward‡ with qualifying purchase of $20 or more plus earn 5% in Rewards+ on this purchase. Valid through 6/28/26.
This item is available online only
Delivery to
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Neighbor’s Club Members earn points with purchases.
Install the ToolTuff Direct Overrunning Clutch. Tractor 1-3/8 x 6 in. Spline Over-Running Clutch Series: 75 HP, Standard Duty. Tractor End: 1-3/8 x 6 in. Spline.
- Quick release
- Implement End: 1-3/8 x 6 in. Spline
- 75 HP power rating
- Rugged steel construction
| Brand | ToolTuff Direct |
|---|---|
| Country of Origin | Imported |
| Brand Compatibility | Other |
| Model Compatibility | Over Running Clutch |
| Package Quantity | 1 |
| Primary Material | Steel |
| Product Height | 6 in. |
| Product Length | 9 lb. |
| Product Weight | 6 in. |
| Product Width | 6 in. |
| Tractor PTO Part Type | Clutch |
| Manufacturer Part Number | 27-027 |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 8 of 8 Questions
Newest questions
Q: Why are there NO instructions for installation or maintenance ???
8 months ago1 Answer
- A: Hi Neighbor! Please contact the manufacturer.7 months agoHelpful?
Q: Can the overrunning clutch be use on a 18 hp tractor?
10 months ago1 Answer
- A: Hello Neighbor, Yes, this clutch can be used on an 18 hp tractor.10 months agoHelpful?
Q: Does it need to be greased when installing
a year ago1 Answer
- A: Hi Neighbor! Yes, you should grease the ToolTuff Direct Overrunning Clutch during installation and regularly afterward.11 months agoHelpful?
Q: Does it fit a ford 2n
a year ago1 Answer
- A: Hi Neighbor! This product fits tractors with a 1-3/8 x 6 in Spline. We advise referring to the owner's manual or contacting the tractor's manufacturer to confirm fitment.a year agoHelpful?
Q: Does the tooltuff overrunning clutch have a warranty?
2 years ago1 Answer
- A: Please reach out to the manufacturer at the link below to register your warranty for this product. https://www.tooltuffdirect.com/pages/warranty-registration2 years agoHelpful?
Q: Where is the motor on the overrunning clutch?
2 years ago1 Answer
- A: An overrunning clutch allows the rotating component to spin faster than the actual driving component that is producing the driving force. Typically, an overrunning clutch engages and disengages when the driven RPM exceeds the driving component's RPM.2 years agoHelpful?
Q: How long is the tooltuff overrunning clutch warranted?
2 years ago1 Answer
- A: Warranty: Limited lifetime warranty on the motor to the original purchaser and original installation location. All other components have a 1 year warranty2 years agoHelpful?
Q: How does this work compared to a regular slip clutch? I don’t have a slip clutch on my 72” tiller and am worried about hitting a large obstruction under the surface and damaging my 33 hp tractor.
2 years ago1 Answer
- A: An overrunning clutch allows the rotating component to spin faster than the actual driving component that is producing the driving force. Typically, an overrunning clutch engages and disengages when the driven RPM exceeds the driving component's RPM.2 years agoHelpful?
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 8 of 8 Questions
Newest questions
Q: Why are there NO instructions for installation or maintenance ???
8 months ago1 Answer
- A: Hi Neighbor! Please contact the manufacturer.7 months agoHelpful?
Q: Can the overrunning clutch be use on a 18 hp tractor?
10 months ago1 Answer
- A: Hello Neighbor, Yes, this clutch can be used on an 18 hp tractor.10 months agoHelpful?
Q: Does it need to be greased when installing
a year ago1 Answer
- A: Hi Neighbor! Yes, you should grease the ToolTuff Direct Overrunning Clutch during installation and regularly afterward.11 months agoHelpful?
Q: Does it fit a ford 2n
a year ago1 Answer
- A: Hi Neighbor! This product fits tractors with a 1-3/8 x 6 in Spline. We advise referring to the owner's manual or contacting the tractor's manufacturer to confirm fitment.a year agoHelpful?
Q: Does the tooltuff overrunning clutch have a warranty?
2 years ago1 Answer
- A: Please reach out to the manufacturer at the link below to register your warranty for this product. https://www.tooltuffdirect.com/pages/warranty-registration2 years agoHelpful?
Q: Where is the motor on the overrunning clutch?
2 years ago1 Answer
- A: An overrunning clutch allows the rotating component to spin faster than the actual driving component that is producing the driving force. Typically, an overrunning clutch engages and disengages when the driven RPM exceeds the driving component's RPM.2 years agoHelpful?
Q: How long is the tooltuff overrunning clutch warranted?
2 years ago1 Answer
- A: Warranty: Limited lifetime warranty on the motor to the original purchaser and original installation location. All other components have a 1 year warranty2 years agoHelpful?
Q: How does this work compared to a regular slip clutch? I don’t have a slip clutch on my 72” tiller and am worried about hitting a large obstruction under the surface and damaging my 33 hp tractor.
2 years ago1 Answer
- A: An overrunning clutch allows the rotating component to spin faster than the actual driving component that is producing the driving force. Typically, an overrunning clutch engages and disengages when the driven RPM exceeds the driving component's RPM.2 years agoHelpful?
Similar Items
-
-
-
-
-
Top Rated
-
-
-
-
-
-
-
Items You May Like
-
-
-
-
Top Rated
-
-
-
Top Rated
-
-
-
-
-
Customers Also Bought
-
-
-
Top Rated
-
-
-
-
-
-
-
-
-
Reviews
Summary of Reviews
The ToolTuff Overrun Clutch is described as a well-made, heavy-duty product that is easy to install and performs reliably when operating rotary brush cutters and other PTO-driven implements. Customers...
- English
- German
- French
- Spanish
- Portuguese
- Italian
- Korean
- Chinese
- Japanese
- Arabic
- purchase
- exchanges
1 to 4 of 33 Reviews .
1 – 4 of 33 Reviews
Most Recent
Review 1
1 out of 5 stars.
Lost shipment, customer service unresponsive
20 days ago
I bought 2 of these, and they never showed up. I contacted customer service and nothing. Their online ordering system is terrible and does not offer tracking and their customer service doesn't answer when contacted.
No, I do not recommend this product.
Curwensville PA
Review 1
5 out of 5 stars.
Better design overrun clutch.
26 days ago
Much better than the ones you pin to the PTO. I had the other style. The pin would fail a few time each season. This one does not pin but mounts like a standard PTO coupler. Easy on and off.
SweepstakesYes
Yes, I recommend this product.
Anonymous
Review 1
4 out of 5 stars.
Wobbly
6 months ago
Loose jointed cause PTO shaft vibration
Yes, I recommend this product.
Anonymous
Review 1
5 out of 5 stars.
good unit
9 months ago
used this on my 35 hp NH Boomer for years in line with a 6" brush hog