Superior Pump 1/3 hp 3/4 in. Bronze Paddle Pump, 18 GPM
Superior Pump 1/3 hp 3/4 in. Bronze Paddle Pump, 18 GPM
Item # 1176496
Get everything you need
Neighbor’s Club Members earn points with purchases.
Item # 1176496
This item is available online only
Delivery to
37027
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Get everything you need
Neighbor’s Club Members earn points with purchases.
Based on Loren Simer's original bronze paddle pump the Decko Products BP20x bronze transfer pump is built to last. Made from 85/5/5/5 bronze the pump features a stainless steel impeller shaft and fasteners. The pump will develop 30 psi and handles liquids up to 180 degree F. The BP21x is great for draining and filling heating and hot water systems. The BP21x works best when paired with a 1/3hp 1725 electric motor. The X type impeller handles most flammable and corrosive liquids*. *Not recommended for ethanol use. Backed by a 1 year warranty.1 Year warranty
For additional information on this product, please see the Product Documents section for all downloadable user manuals, installation guides, brochures and warranty statements.
- Loren Simer's original bronze paddle pump
- Made from 85/5/5/5 bronze
- Will develop 30 psi
- Stainless steel impeller shaft & fasteners
- Handles liquids up to 180 degree F
- Great for draining & filling heating and hot water systems
- Recommended motor size: 1/3 hp 1725 RPM
- 1/2 in. stainless steel drive shaft
- 3/4 in. suction and discharge
- X type impeller handles most flammable & corrosive liquids* * See chemical chart for compatible liquids * Not recommended for ethanol use
| Brand | Superior Pump |
|---|---|
| Country of Origin | Imported |
| Body Material | Bronze |
| Compatible Pipe Material | Galvanized, Copper |
| Discharge Connection | Threaded Female |
| Discharge Diameter | 34 in. |
| Discharge Rate at 0 ft. | 18 GPM |
| Discharge Rate at 10 ft. | 16 GPM |
| Engine Brand | N/A |
| Engine Displacement | 0 cc |
| Features | Made from 85/5/5/5 bronze, Will develop 30 psi, Stainless steel impeller shaft & fasteners, Handles liquids up to 180 deg. F Great for draining & filling heating and hot water systems, Recommended motor size 1/3 hp 1725 RPM "X" type impeller handles mos |
| Fuel Capacity | 0 oz. |
| Horsepower | 13 HP Not included |
| Hose Diameter | 0 in. |
| Impeller Material | Oil resestant rubber |
| Inlet Connection | Threaded Female |
| Inlet Diameter | 34 in. |
| Maximum Flow Rate | 18 GPM |
| Maximum Head Lift | 65 ft. |
| Maximum Operating Pressure | 30 PSI |
| Maximum Operating Temperature | 180degF |
| Maximum Suction Lift | 12 ft. |
| Minimum Operating Pressure | 30 PSI |
| Minimum Operating Temperature | 32 deg. |
| Power Type | Other |
| Product Height | 5.25 in. |
| Product Length | 5.375 in. |
| Product Weight | 4.4 lb. |
| Product Width | 5.5 in. |
| Pump Mechanism | Centrifugal |
| Motor Type | Split Capacitor |
| Warranty | 1 Year Limited |
| Manufacturer Part Number | BP20X |
Q: Can this pump run 2 ways? I.E, transfer water from one container to another and back again
4 years ago- A: The following can be found in the instructional manual: from the factory, the pump is set up for counter clockwise rotation (from opposite shaft end). To reverse the direction of the pump, first remove one end plate and impeller.4 years agoHelpful?
Q: Do you think it would pump warm honey
4 years ago- A: For assistance with this inquiry you would need to contact the manufacture directly at 1-800-495-9278.4 years agoHelpful?
Q: can I pump potable water safely, and maintain its potability?
6 years ago- A: The product is not designed for potable water.6 years agoHelpful?
Q: Will this pump handle sealcoat material while hooked up to a 5hp motor
8 years ago- A: Please see the included response that we received from the manufacturer. "There are a couple of things to consider. There are different weights of driveway sealcoat, but in general, if it’s pourable, then it’s thin enough to be pumped by this pump. Something to check – if the sealcoat has sand in it, it’s going to chew up the pump and impeller, which of course isn’t covered by the warranty. As far as the motor, usually we recommend something smaller, like 1/3 HP or ½ HP. It has more to do with the RPM’s. If using an engine, we recommend nothing more than 2000 RPM’s. Something in the 1400 RPM range is preferable."8 years agoHelpful?
Similar Items
-
-
-
-
Top Rated
-
-
Top Rated
-
Top Rated
-
-
-
-
-
Items You May Like
-
Top Rated
-
-
-
-
Top Rated
-
Top Rated
-
-
-
-
-
-
Customers Also Bought
-
-
-
-
-
-
-
Top Rated
-
-
-
-
-
Top Rated
