$95.99
Sale
Save(76%)
Sportsman Gas-Powered T-Post Driver
Limited Time Deal
Sportsman Gas-Powered T-Post Driver
Item # 172205799
$95.99
Sale
Save(76%)
Notice:
This Item cannot be shipped to CA.Add a protection plan
Powersport plans are not available in CA.
Neighbor’s Club Members earn points with purchases.
$95.99
Sale
Save(76%)
New Cardmembers earn a $20 Reward‡ with qualifying purchase of $20 or more plus earn 5% in Rewards+ on this purchase. Valid through 11/8/26.
Out of stock at or near
Grassland (franklin) TN
Out of stock delivering to
37027
This item is not available
Search Stores
Temporarily unavailable
Notice:
This Item cannot be shipped to CA.Add a protection plan
Powersport plans are not available in CA.
Neighbor’s Club Members earn points with purchases.
Make quick work installing fencing with the Sportsman Earth Series Gas Powered T-Post Driver. This portable and light weight Post Driver Jack Hammer weighs just 34 lb. but can still drive a post in seconds with a 2-stroke, 1/2 HP motor and 9000 revolutions per minute. Makes for comfort as well as speed, the Pile Hammer has internal vibration dampening technology that will lessen fatigue and irritation while in use.
- Use at home in the garden, at the farm, or for industrial projects
- Small but powerful engine drives posts quickly and efficiently
- Portable and lightweight for easy handling
- Internal dampening technology lessens vibrations reducing fatigue and irritation during use
- Package includes one pile driver, one 67mm piling head, two piling sleeves (49mm and 69mm), lubricating grease, an oil can, and a tool kit with assembly and maintenance info
- 30 ounce fuel capacity, with see-through construction to check fuel levels
- Manual recoil start, two stroke, single cylinder, 2 cycle engine, 32.7 cc, air cooled
- Uses a gas/oil ratio 50:1, 2 cycle engine oil
- Fuel consumption rate 0.5 L/hour
- Impact frequency 1700-2230 min-1, impact energy: 25~45J
- Max power 900w (1.2HP) and 9000r/min, max torque 1.45N.m and 5000r/min MZ10.7 type carburetor, L6T spark plug
- Overall size (with head): 13.4L x 9.8W x 29.5H inches, 34 lb.
- EPA approved, Non-CARB compliant/Not for sale in California
| Brand | Sportsman |
|---|---|
| Country of Origin | Imported |
| Primary Color | Black |
| Primary Material | Metal |
| Product Height | 29.5 in. |
| Product Length | 13.4 in. |
| Product Weight | 38 lb. |
| Product Width | 9.8 in. |
| Warranty | 1 Year Limited Manufacturer's Warranty/2 Year Emissions Warranty |
| Manufacturer Part Number | GPDR |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 46 Questions
Newest questions
Q: What's the model and serial number?
2 months ago1 Answer
- A: The model is GPDR. The serial number is located on the machine it's self.Anonymous2 months agoHelpful?
Q: Will it drive a shallow well point?
4 months ago1 Answer
- A: It would depend on the size post you are trying to pound. ours can go up to 2.67 inches wide.Anonymous3 months agoHelpful?
Q: Will this work to drive 2 3/8 inch hollow chain link fence corner posts?
6 months ago1 Answer
- A: this unit can drive posts up to 2.67 inches (68mm) in diameter.Anonymous6 months agoHelpful?
Q: Will this work in cleche oil?
a year ago1 Answer
- A: we have not tested it with cleche oil so we cannot say if it would work or not.Anonymousa year agoHelpful?
Q: if I buy this on line and it docent work can I take it back to the store
a year ago1 Answer
- A: yes you can if it is within the first 30 days and you drain all the gas and oil out of itAnonymousa year agoHelpful?
Q: Can I get a replacement 67 mm piling head for the machine
2 years ago1 Answer
- A: yes you will have to call us at 636-532-9888Anonymous2 years agoHelpful?
Q: Can it be used to drive ground rods
2 years ago1 Answer
- A: AS LONG AS IT FITS THE BIT YESAnonymous2 years agoHelpful?
Q: Can this pound a 2” diameter hollow metal post? Will that fit in the head?
2 years ago1 Answer
- A: YES IT CANAnonymous2 years agoHelpful?
Q: Can this drive Postmaster metal posts?
2 years ago1 Answer
- A: Yes this is made to work with metal and wood.Anonymous2 years agoHelpful?
Q: I need to drive round posts approximately 1 1/4 long, will it do it?
2 years ago1 Answer
- A: The smallest sleeve is 2 inches , that should do the trick for you.Anonymous2 years agoHelpful?
1 - 10 of 46 Questions
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 46 Questions
Newest questions
Q: What's the model and serial number?
2 months ago1 Answer
- A: The model is GPDR. The serial number is located on the machine it's self.Anonymous2 months agoHelpful?
Q: Will it drive a shallow well point?
4 months ago1 Answer
- A: It would depend on the size post you are trying to pound. ours can go up to 2.67 inches wide.Anonymous3 months agoHelpful?
Q: Will this work to drive 2 3/8 inch hollow chain link fence corner posts?
6 months ago1 Answer
- A: this unit can drive posts up to 2.67 inches (68mm) in diameter.Anonymous6 months agoHelpful?
Q: Will this work in cleche oil?
a year ago1 Answer
- A: we have not tested it with cleche oil so we cannot say if it would work or not.Anonymousa year agoHelpful?
Q: if I buy this on line and it docent work can I take it back to the store
a year ago1 Answer
- A: yes you can if it is within the first 30 days and you drain all the gas and oil out of itAnonymousa year agoHelpful?
Q: Can I get a replacement 67 mm piling head for the machine
2 years ago1 Answer
- A: yes you will have to call us at 636-532-9888Anonymous2 years agoHelpful?
Q: Can it be used to drive ground rods
2 years ago1 Answer
- A: AS LONG AS IT FITS THE BIT YESAnonymous2 years agoHelpful?
Q: Can this pound a 2” diameter hollow metal post? Will that fit in the head?
2 years ago1 Answer
- A: YES IT CANAnonymous2 years agoHelpful?
Q: Can this drive Postmaster metal posts?
2 years ago1 Answer
- A: Yes this is made to work with metal and wood.Anonymous2 years agoHelpful?
Q: I need to drive round posts approximately 1 1/4 long, will it do it?
2 years ago1 Answer
- A: The smallest sleeve is 2 inches , that should do the trick for you.Anonymous2 years agoHelpful?
1 - 10 of 46 Questions
Similar Items
-
-
-
Top Rated
-
Top Rated
-
-
-
-
Top Rated
-
Top Rated
-
-
-
-
-
Frequently Bought Together
-
Top Rated
-
Top Rated
-
-
Top Rated
-
Top Rated
-
-
-
-
-
-
Top Rated
-
-
-
Reviews
Summary of Reviews
The product is generally effective for driving in T-posts, especially in hard or rocky soil, with users praising its ease of use and power. However, some found it lacking in power for the most challenging soil conditions, with issues removing posts and problems with the carburetor. Overall, the prod...
- English
- German
- French
- Spanish
- Portuguese
- Italian
- Korean
- Chinese
- Japanese
- Arabic
- purchase
- satisfaction
- quality
- price
- weight
- instructions
- returns
- small
1 to 4 of 167 Reviews .
1 – 4 of 167 Reviews
Most Recent
Anonymous
NC
Review 1
5 out of 5 stars.
Great little machine
28 days ago
Helped us put 70 posts in very quickly and easily!
Review 1
5 out of 5 stars.
i use it to drive ground rods.Ronald Harvey
a month ago
Works great it has a plate with a socket keeeper to hold it in is a poor design.but ponds goo
SweepstakesYes
Yes, I recommend this product.
Collins MO
Review 1
5 out of 5 stars.
If you’re building fence, you’re gonna want this
2 months ago
I just got mine in today and just drove a couple of hundred posts with it made the job so much easier. I’ll tell you at first start up after you’ve pulled it for a few times with the choke on you might wanna pull the throttle back to the full position to get it to fire up easier but this is 100% worth the money
Yes, I recommend this product.
Texas panhandle
Review 1
5 out of 5 stars.
Gas powered t-post driver
3 months ago
Drove over 30 t-posts in rocky ground in 1-1/2 hours. Tool worked great with no discomfort.
SweepstakesYes
Yes, I recommend this product.