Motomco 2.1 oz. Mole Killer, Worm, 8-Pack

A: You can find the directions below on the back of the product label. 1. Verify Active Runways: Use your finger, small wooden dowel or a narrow rod to puncture a hole in the top of subsurface** runways. NOTE: Be careful to not crush runway. Mark opened runways and revisit them 48-72 hours later. Runways that have had holes resealed within 72 hours should be baited. (See Step 2) 2. Bait Active Runways: Make a hole in the top of the runway with a rod slightly larger than the diameter of the bait. Drop one worm into the opening, ensuring that the worm is completely in the runway. No part of the worm should be exposed. Carefully reseal pinching hole closed. If not possible, cover with a small rock. Repeat bait application every 5-10 feet of active runway. 3. Determine Baiting Results: Five to seven days after application, check for mole activity using the same procedure for determining initial activity. Return 48-72 hours later and retreat all active runs. ** Deep tunnel/mound systems require a slightly different procedure. See bottom of package for details. NOTE: All properties are susceptible to recolonization. However, properties near woods, fields, streams/lakes etc. are especially prone to this. These areas will have to be continually monitored and retreated if activity returns.

A: You can find the directions below on the back of the product label. 1. Verify Active Runways: Use your finger, small wooden dowel or a narrow rod to puncture a hole in the top of subsurface** runways. NOTE: Be careful to not crush runway. Mark opened runways and revisit them 48-72 hours later. Runways that have had holes resealed within 72 hours should be baited. (See Step 2) 2. Bait Active Runways: Make a hole in the top of the runway with a rod slightly larger than the diameter of the bait. Drop one worm into the opening, ensuring that the worm is completely in the runway. No part of the worm should be exposed. Carefully reseal pinching hole closed. If not possible, cover with a small rock. Repeat bait application every 5-10 feet of active runway. 3. Determine Baiting Results: Five to seven days after application, check for mole activity using the same procedure for determining initial activity. Return 48-72 hours later and retreat all active runs. ** Deep tunnel/mound systems require a slightly different procedure. See bottom of package for details. NOTE: All properties are susceptible to recolonization. However, properties near woods, fields, streams/lakes etc. are especially prone to this. These areas will have to be continually monitored and retreated if activity returns.

A: Yes, this product is considered toxic and can harm your pets if proper precautions are not followed. It is extremely toxic to mammals and contains the active ingredient Bromethalin. Always review the precautionary statements and user instructions before application to ensure the safety of your dogs.

A: No, Motomco Mole Killer is not designed to kill armadillos and is unlikely to be effective. The product is formulated specifically to target the diet and behavior of moles, not armadillos. Tractor Supply sells products that can help with armadillo problems, primarily live traps and animal repellents. Trapping is generally the most effective method, as repellents can have mixed results with armadillos.

A: This product is only approved to control the species listed on the label (moles). We haven't tested it on voles or any other "non-target" animals and can't legally recommend this bait for use outside of the specific species listed on the label.

A: Hello, thank you for your question. Motomco 2.1 oz. Mole Killer is considered toxic and can harm your pets if the proper precautions are not followed. Please review all precautionary statements and user instructions included with the product before applying.

A: Hi, This product is designed to eliminate moles. However, if a squirrel were to eat the bait, it could kill them as well. We do not recommend purchasing exclusively to eliminate squirrels.

A: Hello, Thank you for your question. These are the instructions included on the product label: 1. Verify Active Runways: Use your finger, small wooden dowel or a narrow rod to puncture a hole in the top of subsurface** runways. NOTE: Be careful to not crush runway. Mark opened runways and revisit them 48-72 hours later. Runways that have had holes resealed within 72 hours should be baited. (See Step 2) 2. Bait Active Runways: Make a hole in the top of the runway with a rod slightly larger than the diameter of the bait. Drop one worm into the opening, ensuring that the worm is completely in the runway. No part of the worm should be exposed. Carefully reseal pinching hole closed. If not possible, cover with a small rock. Repeat bait application every 5-10 feet of active runway. 3. Determine Baiting Results: Five to seven days after application, check for mole activity using the same procedure for determining initial activity. Return 48-72 hours later and retreat all active runs. ** Deep tunnel/mound systems require a slightly different procedure. See bottom of package for details. NOTE: All properties are susceptible to recolonization. However, properties near woods, fields, streams/lakes etc. are especially prone to this. These areas will have to be continually monitored and retreated if activity returns.

A: According to the ecological information in the SDS sheet: Ecotoxicity Effects: This product is extremely toxic to birds and mammals. Do not apply this product directly to water, where surface water is present or to intertidal areas below the mean high water mark. Carefully follow label cautions and directions to reduce hazards to children, pets and non-target wildlife. Persistence and degradability: Product is inherently biodegradable. Bioaccumulative potential: Not determined. Bromethalin water solubility is extremely low (< 0.1mg/l). Mobility in Soil: Not determined. Mobility of bromethalin in soil is considered to be limited. Other adverse effects: None.

A: Bait must be applied directly into moles' burrow systems. This bait must be applied underground in either main underground runways or in subsurface feeding tunnels. This bait may not be used above ground. Wear gloves when bait is handled.