DEWALT Abrasive BlastVac for Clean, Portable Sandblasting, 120 V, 5.5-6.5 SCFM at 115PSI
$674.99
Sale
Save(10%)
DEWALT Abrasive BlastVac for Clean, Portable Sandblasting, 120 V, 5.5-6.5 SCFM at 115PSI
Limited Time Deal
Online Only
DEWALT Abrasive BlastVac for Clean, Portable Sandblasting, 120 V, 5.5-6.5 SCFM at 115PSI
Item # 2380999
$674.99
Sale
Save(10%)
or
or
Add this item to unlock free delivery!
Notice:
This Item cannot be shipped to AK, HI.
Neighbor’s Club Members earn points with purchases.
Limited Time Deal
Online Only
DEWALT Abrasive BlastVac for Clean, Portable Sandblasting, 120 V, 5.5-6.5 SCFM at 115PSI
Item # 2380999
$674.99
Sale
Save(10%)
or
or
$38/mo.† suggested payments with 18 Months Financing or earn $33 in Rewards+ on this purchase.
Valid 8/24/2026 - 9/7/2026
Valid 8/24/2026 - 9/7/2026
Add this item to unlock free delivery!
This item is available online only
Delivery to
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Notice:
This Item cannot be shipped to AK, HI.Neighbor’s Club Members earn points with purchases.
This DEWALT Abrasive BlastVac is the ideal product for portable and clean abrasive blasting, with a recovery system that allows you to get the most of your abrasive media. This clever 2-in-1 unit recovers media for reuse while blasting via the cleverly designed handle gun / handle system, which contains a blasting nozzle, vacuum chamber and containment brush. This BlastVac eliminates the need to use the messy and wasteful spray to waste portable blasters of the past. Abrasive material is drawn into the gun, projected through the nozzle to blast away old coatings, rust, debris, and paint on flat to gently rounded surfaces while at the same time the vacuum feature in the gun recovers and circulates the media back into the unit to be reused. This unit recycles up to 90% of the abrasive media for reuse making spray to waste obsolete.
For additional information on this product, please see the Product Documents section for all downloadable user manuals, installation guides, brochures and warranty statements.
- Portable Blaster w/Vacuum Assist for clean, portable blasting of flat to gently rounded surfaces
- 5.5 6.5 SCFM @ 115 PSI
- Powerful Turbine Vacuum Recovers Media for Reuse
- Abrasive Capacity 20 lbs. to 35 lbs.
- Heavy Duty Steel Body Construction
- For use with abrasive media - do not use with sand
| Brand | DEWALT |
|---|---|
| Country of Origin | Imported |
| Abrasive Capacity | 28 gal |
| Average Air Consumption | 5.5-5.6 SCFM at 115 PSI |
| Feed Type | Manual |
| Features | Recycles 90% of Abrasive material |
| Housing Material | Steel |
| Maximum Operating Pressure | 140 PSI |
| Minimum Operating Pressure | 115 PSI |
| Nozzle Size | 2.586 in. |
| Product Height | 20.7 in. |
| Product Length | 40.7 in. |
| Product Weight | 70.9 lb. |
| Product Width | 18.3 in. |
| Recommended Media | Other |
| Sandblaster Type | Abrasive Blasters |
| Warranty | 1 Year Limited |
| Manufacturer Part Number | DXCM009-0369 |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 7 of 7 Questions
Newest questions
Q: What is the accural hight of this equipment
Anonymousa year ago1 Answer
- A: Hello, thank you for your question. It is 38.7" tall.a year agoHelpful?
Q: why if it says 5.5-6.5 SCFM at 115, did you tell someone it was 10SCFM AT 115psi?
a year ago1 Answer
- A: Hello, thank you for your question. Please reach out to DeWALT for assistance with this specific inquiry. ***DEWALT*** https://support.dewalt.com/hc/en-us/requests/new 800-433-9258 / 8:00 am - 6:00 pm (M-F)a year agoHelpful?
Q: Will it do corn cob media blast?
a year ago1 Answer
- A: Hello, thank you for your question. The recommended abrasive media are: High Power: Black aluminum oxide for removing rust, paint, and body filler. Medium Power: Glass beads, safe for soft metals, for removing rust, paint, and body filler. Delicate Power: Walnut shells for cleaning or polishing soft metal, fiberglass, wood, and stone.a year agoHelpful?
Q: Will this unit use corncob media to clean log home
a year ago1 Answer
- A: Hi, For such a specific product inquiry, please reach out to DeWalt using the information below. ***DEWALT*** https://support.dewalt.com/hc/en-us/requests/new OR CALL 800-433-9258 Monday - Friday, 8:00 A.M. - 6:00 P.M. Eastern Time.a year agoHelpful?
Q: Is this machine able to use soda as a media...?
a year ago1 Answer
- A: Hello, thank you for your question. Per the vendor, "No, we do not recommend soda. The abrasive media guide we recommend is as follows: black aluminum oxide at high power for removing rust, paint, and body filler. Also, glass beads at medium power, which are safe for soft medal, remove rust, paint, and body filler. Then walnut shells at delicate power are used to clean or polish soft metal, fiberglass, wood and stone. We hope this assists you!"a year agoHelpful?
Q: Would this unit (0369) be able to remove daged and peeling stucco by a homeowner on a fairly large scale?
2 years ago1 Answer
- A: Jerry, note, an air compressor is needed to utilize this unit and we do believe it will work with brick and stucco, just be aware the hose is 8'. We have only tested the unit with the hose length supplied. Be aware. there may be a slight drop in efficiency as there would be a drop in operating pressure and vacuum recovery with the use of longer hoses. Consider the hose length for your application in determining if it is a fit or not. Please reach out to our Service Team if you need further assistance with your situation. The Service Team can be reached at 1-888-859-4549 or through email at service.parts@sanborn-mfg.com.2 years agoHelpful?
Q: Does this need an external air compressor?
2 years ago2 Answers
- A: Jerry, we are sorry to see but the response provided a day ago was incorrect. The Blast Vac DOES need an air compressor to work with it. You would connect an air hose coupler to air inlet plug located on side of unit, a 115 PSI and 10 SCFM unit recommended. The users manual link that they provided may assist. If not, please contact a service and parts team that can assist, please contact 1-888-895-4549 or service.parts@sanborn-mfg.com.2 years agoHelpful?
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 7 of 7 Questions
Newest questions
Q: What is the accural hight of this equipment
Anonymousa year ago1 Answer
- A: Hello, thank you for your question. It is 38.7" tall.a year agoHelpful?
Q: why if it says 5.5-6.5 SCFM at 115, did you tell someone it was 10SCFM AT 115psi?
a year ago1 Answer
- A: Hello, thank you for your question. Please reach out to DeWALT for assistance with this specific inquiry. ***DEWALT*** https://support.dewalt.com/hc/en-us/requests/new 800-433-9258 / 8:00 am - 6:00 pm (M-F)a year agoHelpful?
Q: Will it do corn cob media blast?
a year ago1 Answer
- A: Hello, thank you for your question. The recommended abrasive media are: High Power: Black aluminum oxide for removing rust, paint, and body filler. Medium Power: Glass beads, safe for soft metals, for removing rust, paint, and body filler. Delicate Power: Walnut shells for cleaning or polishing soft metal, fiberglass, wood, and stone.a year agoHelpful?
Q: Will this unit use corncob media to clean log home
a year ago1 Answer
- A: Hi, For such a specific product inquiry, please reach out to DeWalt using the information below. ***DEWALT*** https://support.dewalt.com/hc/en-us/requests/new OR CALL 800-433-9258 Monday - Friday, 8:00 A.M. - 6:00 P.M. Eastern Time.a year agoHelpful?
Q: Is this machine able to use soda as a media...?
a year ago1 Answer
- A: Hello, thank you for your question. Per the vendor, "No, we do not recommend soda. The abrasive media guide we recommend is as follows: black aluminum oxide at high power for removing rust, paint, and body filler. Also, glass beads at medium power, which are safe for soft medal, remove rust, paint, and body filler. Then walnut shells at delicate power are used to clean or polish soft metal, fiberglass, wood and stone. We hope this assists you!"a year agoHelpful?
Q: Would this unit (0369) be able to remove daged and peeling stucco by a homeowner on a fairly large scale?
2 years ago1 Answer
- A: Jerry, note, an air compressor is needed to utilize this unit and we do believe it will work with brick and stucco, just be aware the hose is 8'. We have only tested the unit with the hose length supplied. Be aware. there may be a slight drop in efficiency as there would be a drop in operating pressure and vacuum recovery with the use of longer hoses. Consider the hose length for your application in determining if it is a fit or not. Please reach out to our Service Team if you need further assistance with your situation. The Service Team can be reached at 1-888-859-4549 or through email at service.parts@sanborn-mfg.com.2 years agoHelpful?
Q: Does this need an external air compressor?
2 years ago2 Answers
- A: Jerry, we are sorry to see but the response provided a day ago was incorrect. The Blast Vac DOES need an air compressor to work with it. You would connect an air hose coupler to air inlet plug located on side of unit, a 115 PSI and 10 SCFM unit recommended. The users manual link that they provided may assist. If not, please contact a service and parts team that can assist, please contact 1-888-895-4549 or service.parts@sanborn-mfg.com.2 years agoHelpful?
Similar Items
-
-
-
-
-
-
-
Top Rated
-
-
-
-
-
Items You May Like
-
Top Rated
-
-
-
-
-
-
-
-
-
-
-
Reviews
1 to 1 of 1 Review .
1 – 1 of 1 Review
Most Recent
WY
Reviews 2
3 out of 5 stars.
Not so happy
a year ago
You cannot see where the stream of blasting agent is going with the vacuum head installed. Does not work as good as my other sand blaster.
SweepstakesYes
No, I do not recommend this product.