CountyLine 1/3 HP Electric Cast Iron Submersible Sump Pump with Vertical Switch, 3,300 GPH
$229.99
CountyLine 1/3 HP Electric Cast Iron Submersible Sump Pump with Vertical Switch, 3,300 GPH
Exclusive
CountyLine 1/3 HP Electric Cast Iron Submersible Sump Pump with Vertical Switch, 3,300 GPH
Item # 102812599
Stocked & Ready
$229.99
or
or
Get everything you need
Neighbor’s Club Members earn points with purchases.
Exclusive
CountyLine 1/3 HP Electric Cast Iron Submersible Sump Pump with Vertical Switch, 3,300 GPH
Item # 102812599
Stocked & Ready
$229.99
or
or
$39/mo.† suggested payments with 6 Months Financing or earn $11 in Rewards+ on this purchase.
Out of stock at
Grassland (franklin) TN
Delivery to
Pickup Nearby at THOMPSONS STATION TN(14) miles FREE
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Get everything you need
Neighbor’s Club Members earn points with purchases.
Pump water easily with the CountyLine 1/3 HP Cast-Iron Submersible Sump Pump with Vertical Switch. The cast-iron construction offers long-lasting use, and it is designed to pump 3,300 GPH for dependable pumping. The vertical switch included with the sump pump helps keep the pump running smoothly, and the 8 ft. power cord provides enough length to easily power your pump.
For additional information on this product, please see the Product Documents section for all downloadable user manuals, installation guides, brochures and warranty statements.
Looking for more information on sump pumps? Check out our guide on how to replace a sump pump float switch in the product documents section.
- Vertical switch included with the cast-iron submersible sump pump helps ensure pump is working when needed
- Switch on level: 6-3/4 in.
- Switch off level: 3-1/4 in.
- Minimum sump diameter: 10 in.
- 1/3 HP system
- 8 ft. power cord length ensures plenty of slack for powering the pump
- Maximum suction lift: 22 ft.
- Outlet port size: 1-1/2 in. FNPT
- Submersible sump pump with vertical switch dimensions: 12 in. x 8-1/8 in. x 13 in.
- 24 lb. weight
- Cast-iron material provides optimal durability
- Submersible sump pump is designed to pump up to 3,300 GPH for reliable pumping
| Brand | CountyLine |
|---|---|
| Country of Origin | Imported |
| Basin Diameter | 14 in. |
| Body Material | Cast iron |
| Compatible Pipe Material | Other |
| Discharge Connection | Threaded Female |
| Discharge Port Diameter | N/A |
| Discharge Rate at 0 ft. | 3,300 GPH |
| Discharge Rate at 10 ft. | 2,280 GPH |
| Engine Displacement | N/A |
| Features | N/A |
| Horsepower | 1/3 HP |
| Hose Diameter | N/A |
| Inlet Connection | None |
| Inlet Diameter | N/A |
| Maximum Flow Rate | 3,300 GPH |
| Maximum Head Lift | 22 ft. |
| Maximum Operating Pressure | N/A |
| Maximum Operating Temperature | 70 deg. F |
| Maximum Suction Lift | N/A |
| Minimum Operating Pressure | N/A |
| Minimum Operating Temperature | 32 deg. F |
| Power Cord Length | 8 ft. |
| Power Type | Electric |
| Product Height | 11 in. |
| Product Length | 11 in. |
| Product Weight | 24 lb. |
| Product Width | 14 in. |
| Pump Mechanism | Centrifugal |
| Motor Type | Submersible |
| Switch-Off Height | 3.25 in. |
| Switch-On Height | 6.75 in. |
| Warranty | 1 Year Limited |
| Manufacturer Part Number | CLVS13C |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 11 Questions
Newest questions
Q: If unit is submurged will it overheat when running continusly, as for garden use?
a year ago1 Answer
- A: This pump is submersible. this is a sump pump designed to sit in a sump well. As water rises the float switch turns on until the water level drops, then turns off.a year agoHelpful?
Q: How do you wire the two cords for direct direct wiring to power source?
2 years ago1 Answer
- A: For technical Support contact Penair at 1-800-535-4950 to better assist you.2 years agoHelpful?
Q: What is the power draw on the pump in watts
3 years ago1 Answer
- A: Please contact Customer Service at 262-728-55513 years agoHelpful?
Q: Part number for vertical switch
4 years ago1 Answer
- A: Contact vendor Pentair at 262-728-55514 years agoHelpful?
Q: Can the float be removed so the pump will run continuously
4 years ago1 Answer
- A: Yes, the Float can be Removed. BUT, this Unit Cannot Run Continuously. This is an OIL Filled Pump. The Oil will Get Hot and come Out and Burn the Unit UP. This is why the Float is on the Unit to Turn it ON, Evacuate the Water and Shut Off. During the Shut Off Time the Oil will Cool the Motor. If you are Looking for a Continuously Running Unit, Get the Flotec Model FP0S3000X. This is a Water Cooled Unit.4 years agoHelpful?
Q: Can this product be used for a swimming pool
4 years ago1 Answer
- A: No, not as a Continues Running Unit. If it is used on the Top of the Pool Cover, to take the Water Off, Yes. But it has to be Watched, so that when there is No Water on the Pool Cover, the Unit has to be Shut of Manually. There is No Automatic Switch on the Unit. If the Unit was to be Used as a Slide or Water Fountain in the Poo, NO. If used as a Slide or Fountain, you need the FP0S3000X or FP0S4100X.4 years agoHelpful?
Q: Can you just plug in pump and by-pass float
4 years ago1 Answer
- A: Yes, But the Unit should be Only Able to run for about 15 to 20 Minutes the Off for about 30 Minute to Cool. Then be able to Run for the Next 15 to 20 Minutes. The Best is to use the Float Switch to be an Automatic Unit.4 years agoHelpful?
Q: can you hookup to a garden hose
5 years ago2 Answers
- A: No, This has a 1-1/2” NPT Pipe, to discharge the Water from. If you put a Garden Hose on this Unit, it will destroy the Motor in a Very Short Time.5 years agoHelpful?
Q: The motor make a loud hum when there is no water to pump. Is this normal or indication the float switch is bad?
6 years ago1 Answer
- A: Few thing that it could be. 1. There may be some Debris that is in the Impeller Area that is Stopping it from Turning. If the Debris is cleared out, Good Unit. 2. The Float Switch could be Stuck, not able to Move Up and Down on the Rod. 3. Could be the Discharge Pipe has a Blockage in it. 4. Make sure that the 2 (Two) Cords are NOT Plugged into the Wall Outlet Individually. Both Cords are to be Plugged into Each Other, then Only 1 (ONE) Cord into the Wall Outlet. 5. Could be a Bad Capacitor in the Motor. 6. Last of all, Yes, it could be a Bad Float.6 years agoHelpful?
Q: Is there a way to adjust the float on this pump? It runs for five seconds and drains basin tank. Then the basin fills up in five minutes it runs again.
Anonymous6 years ago1 Answer
- A: No, there is not any adjustment on this float switch. The pump turns on when the water rises about 3-1/2 to 4”.6 years agoHelpful?
1 - 10 of 11 Questions
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 11 Questions
Newest questions
Q: If unit is submurged will it overheat when running continusly, as for garden use?
a year ago1 Answer
- A: This pump is submersible. this is a sump pump designed to sit in a sump well. As water rises the float switch turns on until the water level drops, then turns off.a year agoHelpful?
Q: How do you wire the two cords for direct direct wiring to power source?
2 years ago1 Answer
- A: For technical Support contact Penair at 1-800-535-4950 to better assist you.2 years agoHelpful?
Q: What is the power draw on the pump in watts
3 years ago1 Answer
- A: Please contact Customer Service at 262-728-55513 years agoHelpful?
Q: Part number for vertical switch
4 years ago1 Answer
- A: Contact vendor Pentair at 262-728-55514 years agoHelpful?
Q: Can the float be removed so the pump will run continuously
4 years ago1 Answer
- A: Yes, the Float can be Removed. BUT, this Unit Cannot Run Continuously. This is an OIL Filled Pump. The Oil will Get Hot and come Out and Burn the Unit UP. This is why the Float is on the Unit to Turn it ON, Evacuate the Water and Shut Off. During the Shut Off Time the Oil will Cool the Motor. If you are Looking for a Continuously Running Unit, Get the Flotec Model FP0S3000X. This is a Water Cooled Unit.4 years agoHelpful?
Q: Can this product be used for a swimming pool
4 years ago1 Answer
- A: No, not as a Continues Running Unit. If it is used on the Top of the Pool Cover, to take the Water Off, Yes. But it has to be Watched, so that when there is No Water on the Pool Cover, the Unit has to be Shut of Manually. There is No Automatic Switch on the Unit. If the Unit was to be Used as a Slide or Water Fountain in the Poo, NO. If used as a Slide or Fountain, you need the FP0S3000X or FP0S4100X.4 years agoHelpful?
Q: Can you just plug in pump and by-pass float
4 years ago1 Answer
- A: Yes, But the Unit should be Only Able to run for about 15 to 20 Minutes the Off for about 30 Minute to Cool. Then be able to Run for the Next 15 to 20 Minutes. The Best is to use the Float Switch to be an Automatic Unit.4 years agoHelpful?
Q: can you hookup to a garden hose
5 years ago2 Answers
- A: No, This has a 1-1/2” NPT Pipe, to discharge the Water from. If you put a Garden Hose on this Unit, it will destroy the Motor in a Very Short Time.5 years agoHelpful?
Q: The motor make a loud hum when there is no water to pump. Is this normal or indication the float switch is bad?
6 years ago1 Answer
- A: Few thing that it could be. 1. There may be some Debris that is in the Impeller Area that is Stopping it from Turning. If the Debris is cleared out, Good Unit. 2. The Float Switch could be Stuck, not able to Move Up and Down on the Rod. 3. Could be the Discharge Pipe has a Blockage in it. 4. Make sure that the 2 (Two) Cords are NOT Plugged into the Wall Outlet Individually. Both Cords are to be Plugged into Each Other, then Only 1 (ONE) Cord into the Wall Outlet. 5. Could be a Bad Capacitor in the Motor. 6. Last of all, Yes, it could be a Bad Float.6 years agoHelpful?
Q: Is there a way to adjust the float on this pump? It runs for five seconds and drains basin tank. Then the basin fills up in five minutes it runs again.
Anonymous6 years ago1 Answer
- A: No, there is not any adjustment on this float switch. The pump turns on when the water rises about 3-1/2 to 4”.6 years agoHelpful?
1 - 10 of 11 Questions
Similar Items
-
-
-
Top Rated
-
-
Top Rated
-
-
-
-
-
-
-
Reviews
Summary of Reviews
The sump pump is generally considered a reliable and effective product. It is powerful and able to quickly remove large amounts of water, with the cast-iron construction and bottom intake design seen as positive features. However, there are some concerns about the longevity of the pump, with a numbe...
- English
- German
- French
- Spanish
- Portuguese
- Italian
- Korean
- Chinese
- Japanese
- Arabic
Customer Images and Videos
- purchase
- quality
- price
- satisfaction
- installation
- noise level
- volume
- warranty
1 to 4 of 247 Reviews .
1 – 4 of 247 Reviews
Most Recent
Jackson, MS
Review 1
5 out of 5 stars.
Good pump
a year ago
Pumped the water out of an old cistern like a pro. Solidly built.
SweepstakesYes
Yes, I recommend this product.
Anonymous
Review 1
5 out of 5 stars.
Love tractor supply
a year ago
Love it it works great
SweepstakesYes
Reviews 2
5 out of 5 stars.
Five star service and the availability
2 years ago
Great product very good price
SweepstakesYes
Review 1
5 out of 5 stars.
Robust Pump lots of connection options.
2 years ago
Good solid product! Very reliable
Yes, I recommend this product.