AcuRite 5 in. Indoor/Outdoor Thermometer
AcuRite 5 in. Indoor/Outdoor Thermometer
Item # 1043657
$6.99
Neighbor’s Club Members earn points with purchases.
$6.99
Out of stock at or near
Grassland (franklin) TN
Out of stock delivering to
37027
This item is not available
Search Stores
Temporarily unavailable
Neighbor’s Club Members earn points with purchases.
Keep an eye on the temperature using this AcuRite 5 in. Indoor or Outdoor Thermometer. The weather-resistant thermometer is easy to use and shows accurate temperature readings. It's great as either an indoor outdoor thermometer to suit your needs. Plus, the AcuRite thermometer comes with both a hang hole and a side bracket for mounting.One-Year Limited Warranty
For additional information on this product, please see the Product Documents section for all downloadable user manuals, installation guides, brochures and warranty statements.
- Weather-resistant construction makes it suitable as an indoor or outdoor thermometer
- Thermometer has multiple options for easy mounting and viewing
- AcuRite thermometer measures 5 in.
- Includes both an integrated hang hole and a side bracket
| Brand | AcuRite |
|---|---|
| Country of Origin | Imported |
| Battery Size | None |
| Display Type | Analog |
| Features | Weather-Resistant |
| Maximum Temperature | 120 deg. |
| Measurements Supported | Temperature |
| Minimum Temperature | -60 deg. |
| Mounting Type | Hanging |
| Primary Color | White |
| Primary Material | Plastic |
| Product Height | 5 in. |
| Product Length | 5 in. |
| Product Weight | 0.22 lb. |
| Product Width | 0.75 in. |
| Units Of Measure | Fahrenheit and Celsius |
| Thermometer Type | Analog |
| Warranty | 1 Year Limited |
| Manufacturer Part Number | 346GWDI |
No questions have been asked about this product.
No questions have been asked about this product.
Q&As
No questions have been asked about this product.
No questions have been asked about this product.
Similar Items
-
-
-
Top Rated
-
-
-
Top Rated
-
Top Rated
-
-
Top Rated
Reviews
Most Helpful Favorable Review
5 out of 5 stars.
Indoor Outdoor Thermometer
4 years ago
This item works great I would buy another one any time
3 people found this helpful
Show Reviews:
Most Helpful Critical Review
2 out of 5 stars.
Profits over quality
7 years ago
It's a nice size for the deck and is pretty clear to read. If only the temperature was close to being correct. It has a convenient slot in the back allowing the user to 'calibrate' it against a real thermometer. However it is only close if the temps stay close to the calib. temp. If it goes much higher or lower the reading easily falls 10 deg off. I have to re-calibrate every season to the new temp range. It would be prefect in Hawaii though, where the temps stay about 80.
9 people found this helpful
Show Reviews:
Customer Images and Videos
1 to 4 of 29 Reviews .
1 – 4 of 29 Reviews
Most Recent
Mason, Ohio
Review 1
5 out of 5 stars.
A good outdoor thermometer!
14 hours ago
This is probably my 3rd set. They work well, but after some years the plastic yellows, which is to be expected after7 years.
Yes, I recommend this product.
Central NY
Reviews 10
3 out of 5 stars.
Not so much
10 months ago
Worked great for 9 months then nothing. It's stuck on 50 while covered in snow
No, I do not recommend this product.
Response from AcuRite:
9 months ago
AcuRite
We apologize if your thermometer is reading inaccurately, but we are happy to assist! Analog thermometers may need to be calibrated from time to time or even just after purchasing the product. The pointer may move during shipping, causing the thermometer to read inaccurately. These steps can be used on analog, bi-metal coil thermometers. Calibration: If the thermometer is reading incorrectly, compare the reading to a known accurate thermometer. Let both units adjust for at least three hours. Depending on the product, there may be a knob or screw on the back of the thermometer to calibrate the temperature. If the new thermometer continues to read inaccurately, adjust the pointer by turning the knob or screw on the back of the unit in the appropriate direction. If there is no knob or screw for calibration, you will need to adjust the pointer by hand. If the temperature reading is too low, slowly push the needle up to the highest temperature and then slowly let it follow your finger back down until the needle stops on its own. Never let the needle swing back wildly on its own, as this can permanently damage the thermometer. When the needle stops, it will stop a degree or two higher than where it was originally set. Repeat this process until the needle stops at an accurate temperature reading. If the thermometer is too high, push the needle down to the lowest temperature instead. NOTE: While most thermometers can be easily disassembled to gain access to the pointer, some thermometers may not allow easy access to the pointer. Disassembling may damage the thermometer or void the warranty and is not recommended. NOTE: These instructions are to calibrate temperature but can also be used to calibrate humidity. If this does not correct the issue, please reach out to our support team via live chat or email request on the AcuRite Support website.
Have an incredible day!
Haylee
AcuRite Support Team
Have an incredible day!
Haylee
AcuRite Support Team
Review 1
1 out of 5 stars.
Inaccurate Temperature Readings
a year ago
This was easy to hang, but it was literally never accurate. It seemed to always run 5-10 degrees warmer than it actually was and when I put another thermometer next to it to check, it would be off from anywhere between 10 and 20 degrees. AcuRite is usually a really god brand, but this was a waste of money.
Response from AcuRite:
a year ago
AcuRite
We apologize that your thermometer is reading inaccurately, but we would be happy to assist! Analog thermometers may need to be calibrated from time to time or even just after purchasing the product. The pointer may move during shipping, causing the thermometer to read inaccurately. If the thermometer is reading incorrectly, compare the reading to a known accurate thermometer. Let both units adjust for at least three hours. Depending on the product, there may be a knob or screw on the back of the thermometer to calibrate the temperature. If the new thermometer continues to read inaccurately, adjust the pointer by turning knob or screw on the back of the unit in the appropriate direction.
If there is no knob or screw for calibration, you will need to adjust the pointer by hand. If the temperature reading is too low, slowly push the needle up to the highest temperature and then slowly let it follow your finger back down until the needle stops on its own. Never let the needle swing back wildly on its own as this can permanently damage the thermometer. When the needle stops, it will stop a degree or two higher than where it was originally set. Repeat this process until the needle stops at an accurate temperature reading. If the thermometer is too high, follow this same process only pushing the needle down to the lowest temperature.
If this does not correct the issue, please reach out to our support team via live chat or email request on the AcuRite Support website.
Have a lovely day!
Haylee
AcuRite Support Team
If there is no knob or screw for calibration, you will need to adjust the pointer by hand. If the temperature reading is too low, slowly push the needle up to the highest temperature and then slowly let it follow your finger back down until the needle stops on its own. Never let the needle swing back wildly on its own as this can permanently damage the thermometer. When the needle stops, it will stop a degree or two higher than where it was originally set. Repeat this process until the needle stops at an accurate temperature reading. If the thermometer is too high, follow this same process only pushing the needle down to the lowest temperature.
If this does not correct the issue, please reach out to our support team via live chat or email request on the AcuRite Support website.
Have a lovely day!
Haylee
AcuRite Support Team
Central Mississippi
Reviews 2
5 out of 5 stars.
Happy!
a year ago
As expected. Thanks!
SweepstakesYes
Response from AcuRite:
a year ago
AcuRite
Thank you for the time that you have taken to write your review, we appreciate your feedback! If there is ever anything that we can assist you with, please reach out to our support team via live chat or email request on the AcuRite Support website.
Have an outstanding day!
Haylee
AcuRite Support Team
Have an outstanding day!
Haylee
AcuRite Support Team