ToolTuff Direct Bolt-On Spiral Point Auger Pilot Tip for Heavy-Duty Augers
ToolTuff Direct Bolt-On Spiral Point Auger Pilot Tip for Heavy-Duty Augers
Item # 234676499
$29.99
Spend $49.99 to unlock free delivery!
Get everything you need
Neighbor’s Club Members earn points with purchases.
ToolTuff Direct Bolt-On Spiral Point Auger Pilot Tip for Heavy-Duty Augers
Item # 234676499
$29.99
Spend $49.99 to unlock free delivery!
This item is available online only
Delivery to
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Get everything you need
Neighbor’s Club Members earn points with purchases.
The ToolTuff Direct Bolt-On Spiral Point Auger Pilot Tip for Heavy-Duty Augers boasts solid cast construction. It's designed with a 2 in. shank diameter and a 6 in. spiral protrusion.
- Bolt on
- 2 in. shank diameter
- 6 in. spiral protrusion
- 3.5 in. diameter at widest point
- Solid cast construction
- Use with 6-24 in. 2 in. ID tube augers with bolt-on tip receiver
| Brand | ToolTuff Direct |
|---|---|
| Country of Origin | Imported |
| Compatibility | 1 7/8 in. diameter |
| Package Quantity | 1 |
| Primary Color | Black |
| Primary Material | Steel |
| Product Height | 6 in. |
| Product Length | 6 in. |
| Product Weight | 7 lb. |
| Product Width | 6 in. |
| Manufacturer Part Number | 23-039 |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 3 of 3 Questions
Newest questions
Q: Do they come in 1-5/8?
2 months ago1 Answer
- A: Hi Haus- To verify you purchase the correct item, please visit our website or your local TSC store for all available inventory.2 months agoHelpful?
Q: So is the shank 1 7/8 ?
a year ago1 Answer
- A: Hi Tommy! Here are the full product spcifications: 1-7/8" Shank Diameter 6" Spiral Protrusion 3.5" Diameter at widest point Solid Cast Construction Use with 6-24" 2" ID Tube Augers with bolt-on tip receivera year agoHelpful?
Q: What. Type and Size bolt and nut should be installed? Im surprised it does not appeared in your recommended section.
2 years ago1 Answer
- A: Bolt on 1-7/8" Shank Diameter 6" Spiral Protrusion 3.5" Diameter at widest point Solid Cast Construction Use with 6-24" 2" ID Tube Augers with bolt-on tip receiver2 years agoHelpful?
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 3 of 3 Questions
Newest questions
Q: Do they come in 1-5/8?
2 months ago1 Answer
- A: Hi Haus- To verify you purchase the correct item, please visit our website or your local TSC store for all available inventory.2 months agoHelpful?
Q: So is the shank 1 7/8 ?
a year ago1 Answer
- A: Hi Tommy! Here are the full product spcifications: 1-7/8" Shank Diameter 6" Spiral Protrusion 3.5" Diameter at widest point Solid Cast Construction Use with 6-24" 2" ID Tube Augers with bolt-on tip receivera year agoHelpful?
Q: What. Type and Size bolt and nut should be installed? Im surprised it does not appeared in your recommended section.
2 years ago1 Answer
- A: Bolt on 1-7/8" Shank Diameter 6" Spiral Protrusion 3.5" Diameter at widest point Solid Cast Construction Use with 6-24" 2" ID Tube Augers with bolt-on tip receiver2 years agoHelpful?
Similar Items
-
-
Top Rated
-
-
-
-
-
-
-
-
-
-
Items You May Like
-
-
Top Rated
-
-
-
-
-
Top Rated
-
-
-
-
-
Reviews
1 to 4 of 20 Reviews .
1 – 4 of 20 Reviews
Most Recent
Cedar City, Utah
Review 1
5 out of 5 stars.
Repeat buyer
4 months ago
Could be stronger but for the price you can't get better. Fence builder here
SweepstakesYes
Yes, I recommend this product.
Review 1
4 out of 5 stars.
Auger tip
7 months ago
After grinding the shaft diameter down about 2-5mm it fit fine. Most guys using this can manage that but it's time I shouldn't have to spend.
Still easier than trying to fabricate one from scratch.
TS customer service tracking was a joke and wait time to check were 30-40mins.
Laurel, MS
Review 1
5 out of 5 stars.
Post Hole Auger
8 months ago
It was the correct replacement part
Yes, I recommend this product.
Frederick County, Maryland
Reviews 3
5 out of 5 stars.
Adapted to fit PHD in need of TLC
11 months ago
Shaving off a little material with an angle grinder provided sufficient clearance for this to slot in between the cutting edges. A slight bolt hole alignment mismatch prevents its collar from butting up against the shaft snugly, resulting in slight play that does not seem to affect performance. Works great!
SweepstakesYes
Yes, I recommend this product.