Superior Pump 1/2 HP 120V Electric Submersible Thermoplastic Utility Pump, 3,300 GPH
Superior Pump 1/2 HP 120V Electric Submersible Thermoplastic Utility Pump, 3,300 GPH
Item # 117165999
$149.99
Neighbor’s Club Members earn points with purchases.
Superior Pump 1/2 HP 120V Electric Submersible Thermoplastic Utility Pump, 3,300 GPH
Item # 117165999
$149.99
New Cardmembers earn a $20 Reward‡ with qualifying purchase of $20 or more plus earn 5% in Rewards+ on this purchase. Valid through 6/28/26.
This item is available online only
Delivery to
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Neighbor’s Club Members earn points with purchases.
Superior Pump builds pumps that are truly built to last and are 100% factory tested. Superior Pump uses quality components, including solid copper motor windings, heavy-duty stainless steel jacketed shaft seals, double O-ring seals on the motor plate and electronically controlled split capacitors. The Superior Pump model 91570, 1/2 HP submersible utility pump will move water up to 3,300 gal. per hour. This pump is UL/cu listed, CSA certified and backed by a 3 year warranty. The 1-1/2 in. NPT discharge allows for high capacity pumping. Made of tough thermoplastic, this pump is ready to handle a variety of tasks. 3 Year warranty
For additional information on this product, please see the Product Documents section for all downloadable user manuals, installation guides, brochures and warranty statements.
- Pumps up to 3300 gal. per hour pumps water up to 25 vertical feet
- Handles up to 3/8 inch solids
- 1-1/2 inch NPT discharge for high capacity pumping
- 3/4 inch garden hose adapter included
- Tough thermoplastic construction
- 10 foot power supply cord
- Continuous duty, thermally protected split capacitor motor
- 3 Year warranty
- Pump discharge flow at 0 ft. = 3300 gph
- Pump discharge flow at 10 ft. = 2520 gph
| Brand | Superior Pump |
|---|---|
| Country of Origin | Imported |
| Amperage | 4.9A |
| Body Material | Thermoplastic |
| Compatible Pipe Material | ABS |
| Discharge Connection | Threaded Female |
| Discharge Diameter | 1-12 in. MNPT with 3/ 4 in. GHT Adapter |
| Discharge Rate at 0 ft. | 3,300 GPH |
| Discharge Rate at 10 ft. | 2,520 GPH |
| Engine Brand | N/A |
| Engine Displacement | 0 cc |
| Features | Oil Filled Motor, Submersible |
| Fuel Capacity | 0 oz. |
| Horsepower | 12 HP |
| Hose Diameter | 1-12 in. |
| Impeller Material | Stainless Steel |
| Inlet Connection | None |
| Inlet Diameter | 6-14 in. |
| Maximum Flow Rate | 3,300 GPH |
| Maximum Head Lift | 25 ft. |
| Maximum Operating Pressure | 10.8 PSI |
| Maximum Operating Temperature | 120 deg. |
| Maximum Solids Diameter | 38 in. |
| Maximum Suction Lift | 25 ft. |
| Minimum Operating Pressure | 10.8 PSI |
| Minimum Operating Temperature | 32 deg. |
| Oil Capacity | 15 oz. |
| Power Cord Length | 10 ft. |
| Power Type | Electric |
| Product Height | 11.5 in. |
| Product Length | 8.75 in. |
| Product Weight | 8 lb. |
| Product Width | 5.5 in. |
| Motor Type | PSC |
| Utility Pump Type | Multi-purpose |
| Voltage | 120V |
| Warranty | 3 Year Limited |
| Manufacturer Part Number | 91570 |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 8 of 8 Questions
Newest questions
Q: How do I calculate PSI for a submersible pump? I am sure it is constrained by how much lift and HP of pump. figure 10' lift/head then runs level in 3/4" host. Can I reduce to 1/2" to increase PSI? Trying to run a sprinkler.
4 years ago1 Answer
- A: The #91570 is a utility pump. It is not a sprinkler pump. This pump will build a max of 10.8 PSI. It is also not designed to have the flow restricted below a ¾” hose and should not be used with a spray nozzle or sprinkler. Doing this will make the pump work harder and can cause it to overheat and can damage the pump. The pump #96110 is a non-submersible pump designed to be used with a sprinkler.4 years agoHelpful?
Q: Can this pump be used to drain water in winter from a swimming pool when needed?
4 years ago1 Answer
- A: iAs long as the pump is A) standing upright, B) it is at least 2/3rds submerged when running C) the outflow is not restricted smaller than 3/4" and D) the pump does not run 24/7 you should be just fine. Put it on a timer so it runs during daylight hours as an example.4 years agoHelpful?
Q: What’s the minimum depth of water needed for the pump to auto-start?
4 years ago1 Answer
- A: The water level must be at least ½” deep for the pump to operate.4 years agoHelpful?
Q: Will this pump handle 15’ lift through 1.5” hose 50’.
5 years ago2 Answers
- A: Yes, but don't know what PSI at hose end you are looking for.5 years agoHelpful?
Q: Does this pump connect to a standard garden hose?
5 years ago1 Answer
- A: Yes, it can.5 years agoHelpful?
Q: CAN THIS BE USED FOR A FOUNTIAN PUMP FOR A POND ??
6 years ago1 Answer
- A: Hi there, It is not designed for that however, as long as the pump is A) standing upright, B) it is at least 2/3rds submerged when running C) the outflow is not restricted smaller than 3/4" and D) the pump does not run 24/7 you should be just fine. Put it on a timer so it runs during daylight hours as an example Thanks6 years agoHelpful?
Q: Can this pump be used in a dirty water environment such as pumping out a pond?
9 years ago1 Answer
- A: Yes, you have to be careful not to suck up any objects however. You will want to put some sort of filter around the pump.9 years agoHelpful?
Q: Details section say 3 yr warranty and Spec sheet says 1 yr warranty - which is it? Also, I see it has a garden hose attachment. What are the head lift specs with a garden hose?
9 years ago1 Answer
- A: The 91570 at 10' height through a standard garden hose (3/4") would give you around 20-24 gallons per minute. Like pumping out a pool. The higher or longer the hose, the lower the Gallons per minute it will pump out. The warranty is 3 years.9 years agoHelpful?
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 8 of 8 Questions
Newest questions
Q: How do I calculate PSI for a submersible pump? I am sure it is constrained by how much lift and HP of pump. figure 10' lift/head then runs level in 3/4" host. Can I reduce to 1/2" to increase PSI? Trying to run a sprinkler.
4 years ago1 Answer
- A: The #91570 is a utility pump. It is not a sprinkler pump. This pump will build a max of 10.8 PSI. It is also not designed to have the flow restricted below a ¾” hose and should not be used with a spray nozzle or sprinkler. Doing this will make the pump work harder and can cause it to overheat and can damage the pump. The pump #96110 is a non-submersible pump designed to be used with a sprinkler.4 years agoHelpful?
Q: Can this pump be used to drain water in winter from a swimming pool when needed?
4 years ago1 Answer
- A: iAs long as the pump is A) standing upright, B) it is at least 2/3rds submerged when running C) the outflow is not restricted smaller than 3/4" and D) the pump does not run 24/7 you should be just fine. Put it on a timer so it runs during daylight hours as an example.4 years agoHelpful?
Q: What’s the minimum depth of water needed for the pump to auto-start?
4 years ago1 Answer
- A: The water level must be at least ½” deep for the pump to operate.4 years agoHelpful?
Q: Will this pump handle 15’ lift through 1.5” hose 50’.
5 years ago2 Answers
- A: Yes, but don't know what PSI at hose end you are looking for.5 years agoHelpful?
Q: Does this pump connect to a standard garden hose?
5 years ago1 Answer
- A: Yes, it can.5 years agoHelpful?
Q: CAN THIS BE USED FOR A FOUNTIAN PUMP FOR A POND ??
6 years ago1 Answer
- A: Hi there, It is not designed for that however, as long as the pump is A) standing upright, B) it is at least 2/3rds submerged when running C) the outflow is not restricted smaller than 3/4" and D) the pump does not run 24/7 you should be just fine. Put it on a timer so it runs during daylight hours as an example Thanks6 years agoHelpful?
Q: Can this pump be used in a dirty water environment such as pumping out a pond?
9 years ago1 Answer
- A: Yes, you have to be careful not to suck up any objects however. You will want to put some sort of filter around the pump.9 years agoHelpful?
Q: Details section say 3 yr warranty and Spec sheet says 1 yr warranty - which is it? Also, I see it has a garden hose attachment. What are the head lift specs with a garden hose?
9 years ago1 Answer
- A: The 91570 at 10' height through a standard garden hose (3/4") would give you around 20-24 gallons per minute. Like pumping out a pool. The higher or longer the hose, the lower the Gallons per minute it will pump out. The warranty is 3 years.9 years agoHelpful?
Similar Items
-
Top Rated
-
Top Rated
-
-
Top Rated
-
-
Top Rated
-
Top Rated
-
-
-
-
-
Items You May Like
-
Top Rated
-
Top Rated
-
-
Top Rated
-
Top Rated
-
Top Rated
-
-
Top Rated
-
Top Rated
-
-
-
Customers Also Bought
-
Top Rated
-
Top Rated
-
-
Top Rated
-
-
-
Top Rated
-
Top Rated
-
-
-
Top Rated
-
Reviews
- purchase
- for cold weather
- installation
- price
- quality
- reliable
- small
- sturdy
1 to 4 of 7 Reviews .
1 – 4 of 7 Reviews
Most Recent
Anonymous
Uvalde Texas
Review 1
5 out of 5 stars.
Pond pump
10 months ago
solid performance
SweepstakesYes
Yes, I recommend this product.
Response from Pedrollo Group:
10 months ago
Pedrollo Group
Thanks for the nice review
Gibsonia, PA
Reviews 4
5 out of 5 stars.
Sturdy little pump
6 years ago
easy, robust, reliable little pump. put into muddy water and it never clogged .
Yes, I recommend this product.
Review 1
1 out of 5 stars.
Leaks oil
7 years ago
Leaked oil into water, and had to replace with another brand.
No, I do not recommend this product.
Michigan
Review 1
5 out of 5 stars.
Easy to use
7 years ago
I bought this pump to empty out a heated water trough in my chicken and duck small trough in the barn. I knew I had to have a submersible pump so that the water wouldn't freeze inside of it. It was easy to hook up to my heated Pilon hose and worked well at first, but since my ducks get that water super dirty, eventually this pump ended up clogged and barely pushing water. I had no way to clean it out in a freezing Michigan barn in Winter. It was worth a try for me to use this pump, since hauling buckets hurts my back. It wasn't the fault of the pump, which would work well in the right situation--like if I only had chickens. But with messy ducks putting sludge in the water daily, I guess I need a pump made for sewage! Hence, I gave this pump an excellent rating. The water pumped out a bit slow in a 30 ft hose. Not sure if that was due to my situation or not. The cord was nice, long enough and strong. The pump was solidly built and a good value for the price. I wouldn't recommend this for a duck pond or a super mucky situation.
Yes, I recommend this product.