Massimo 60 in. Universal 420cc UTV Snow Blower Attachment

I purchased this to mount on my CFMoto machine last year and did not get it hooked up until this winter. First time I used it I realized the motor is underpowered for the size of the auger and I had to go very slowly to prevent the blower from stalling out. The 2nd time I used it the blower wire harness got caught in the winch pulley and cut all the wires. Fixed that and the next time I used it one of the pins holding the blower to the side by side fell out 3 times so I replaced it with a bolt. The next time I used it the mounting frame broke where it connected to the side by side which rendered the blower unusable. Currently in search of someone local to fabricate a new stronger mounting frame

Buyer beware when buying a Massimo Snow Blower attachment!!!! I purchased one in October of 2025, and used it for the first snow in November. Within one hour of using it, it caught on fire in the PTO area. I went to Tractor Supply where I purchased it and was told that all their warranty work was sent to an outside source. I took it to the place where I was told to. After 2 months of them having it, I got a call that they got the parts in and they were under warranty however the labor cost to fix it was not covered. It didn't matter if it was one day under warranty or 90 days labor isn't cover. I went to tractor supply to get it straightened out and they gave me the customer solution phone number. When I talked to them they informed me that I have to get ahold of Massimo to get it covered. They already stated that they would not cover the labor. I paid over $3000 for this product from Tractor Supply and figured that a well known company like them would at least be willing to try to help out to get a solution instead of pass the buck.

First, Tractor Supply in Dilworth, MN was great to work with. Like other buyers, the machine seems a little under powered but I tasked it with older banks that were iced over from a warming than refrozen. I also took on a 20 inch bank but had it lifted about 6 inches high and did it with 2 passes rather than inching into it. Also like other users, quality of workmanship is questionable. Came with a QC sticker but some welds didn't have penetration and they show through paint and some were just tacks. I knew there may be weld issues going into the purchase but I can weld and also work in a weld shop. Machine also came with oil when it says it was drained prior to shipping. So check before you fill. If you're wondering what oil to use? 1.1 liter of 5w-30 for engine oil and 80-90w for the 2 gearboxes. Pretty basic yet critical information for a user manual. User manual is also very vague. Illustrations are zoomed in too close it is best to look at the item pictures to get an understanding of the assembly. I couldn't find anything regarding the oils to use, service intervals, etc. A number of issues with the mounting plate. I already had a snowplow installed and modified the T-Bar that came with the blower to fit that mounting bracket so they're interchangeable. If you don't have a wiper on your UTV yet, you'll appreciate having one. You can purchase one for $30. The swivel caster wheels seem a little undersized for the weight they carry. Road speed with then is probably 5 mph and that may be too fast. Massimo would have a great product if they listened to customer feedback. Goes back greater than 5 years and seems like little changed. Be nice if they had a cap for the UTV side for the power plug when stowed and not in use. I'll have to modify the opening and store under the hood during summer.

So far, the installation has been very difficult. Parts have broken. Sheer pins, have sheared. I was told that there was no oil in the crank case, so when I put oil in, I way over filled it and had to drain oil out. I'm glad my local tractor supply Said they would take it back if I was unsatisfied. I may do that yet.