Skip to Main Content
MESSAGE

Martin Wheel 5 Bolt Pressed Stud Hub Repair Kit for 1 in. Axle

SKU # 112820299
Important information:

  • Any applicable tires taxes and/or state environmental taxes are included in the sales tax.
Product price

Save Up To
See Price at Check Out
Why?
Product Rating is 4.5
4.5
(4)

Financing Available! Click here for more details...

Quantity

Autoship

Delivery Options:

Item Information

Get back up in running condition with the complete Martin Wheel 5 Bolt Pressed Stud Hub Repair Kit for 1 in. Axle. Designed to be quality, long-lasting products to provide you with the greatest amount of performance and satisfaction at a great value.

  • Includes hub, lug nuts, bearing cups and cones, grease seal and cap
  • Designed for highway service
  • 90 day limited warranty

Note: This product may require up to 2 additional days for order processing prior to shipping

Specification Description
Spindle Length: 4-1/8 in.
Center Hole Size: 2 in.
Number of Studs: 5
Weight Capacity: 1,250 lb.
Bolt Circle Pattern: 4-1/2 in.
Inner Bearing Size (ID): 1 in.
Seal Size (ID): 1 in.
Outer Bearing Size (ID): 1 in.
Spindle Diameter: 1 in.
Brand: Martin Wheel
Product Type: Wheel Hub Repair Kits
Warranty: 90-Day Limited Warranty
Manufacturer Part Number H5-C-PB-B
Martin Wheel 5 Bolt Pressed Stud Hub Repair Kit for 1 in. Axle is rated 4.5 out of 5 by 4.
Rated 4 out of 5 by from Hub Repair Kit I order the hub repair kit online and it arrived to my local store in a few days. The problem was I ordered the wrong repair kit. What I did get was well made and would have been great.
Date published: 2018-04-25
Rated 4 out of 5 by from looks good. Temporary install made on trailer on one side to get appearance. Looks good.
Date published: 2017-08-12
Rated 5 out of 5 by from Best Price I Found Anywhere Bought two sets to up-grade small boat trailer from 8" wheel/tires and four lug to 12" wheel/tire and five lug. They went on without any problem, good quality, great fit and did the two in about an hour. Very pleased. I ordered these on line and had them shipped FREE to my local TS store. They arrived a day early and they e-mailed and called for me to come pick up. Transaction at store was quick and store staff were friendly.
Date published: 2016-09-10
Rated 5 out of 5 by from Hub and Bearning kit for small trailer I have a 25 yr old small boat trailer with a 1 inch axle and was in need of wheel hub replacement for each side of trailer. Found this kit at TSC at a good price for hub and bearing kit. Initially purchased two sets, installed and decided to purchase an additional set for spare. Often times it is only needed to replace the bearing but boat trailers of course go under water each time the boat is launched and taken out of the water therefore will most likely rust all around. These hubs and bearing kit are very nice and not expensive. I am so glad I found them at TSC which reduces the likelihood of wheel or axle failure due to rust and the bearings freezing around the axle. All it all they are well worth it.
Date published: 2015-12-28
  • y_2018, m_7, d_15, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_112820299, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_tractorsupply
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT

will this fit the front of a 8n ford tractor

Asked by: KLSS
It would not fit. This is designed for high speed trailer applications & is set up for a high speed tapered bearing/spindle set up.The bolt circle patterns are usually different, as well as the steel gauge used.
Answered by: BrittanyH
Date published: 2017-11-13

Would I be able to put this on an mobile home axle that I have on an homemade trailer so I can put a regular trailer tire on it?

Asked by: Bubba9112
We would not recommend this hub kit for a mobile home axle. These are lighter duty than typical mobile home applications, so it wouldn’t be able to handle the weight.
Answered by: NRoberts
Date published: 2018-02-05

Will this work on Dexter axles?

Asked by: Johnny Locktown
Dexter makes a lot of different axles , set up for many hub types. If the bolt circle pattern, shaft diameter, hub length, & weight capacity matches up to what is needed on the trailer, then it should work.
Answered by: AmandaW
Date published: 2018-06-26

will this hub fit a 5 lug ford rim

Asked by: robert71
No. These are designed as tow vehicle hubs for trailers.
Answered by: AmandaW
Date published: 2018-04-20

Are these hubs already greased?

Asked by: bmcgee
No, the hubs would need to be greased.
Answered by: Alicia M
Date published: 2018-06-11
  • y_2018, m_7, d_15, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_112820299, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING)]
  • clientName_tractorsupply
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
Attachments (  1 - 1 of 1  )