KBS Coatings KBS Top Coater, Allis Chalmers Orange, 12 oz.
Item # 2381811
Color:
Color:
KBS Top Coater Aerosol in Allis Chalmers Orange is a high solids, UV stable spray paint built for farm and ranch equipment. Allis Chalmers Orange is an OEM matched tractor color for restoring and touching up tractors, implements, and attachments. It bonds direct to bare steel and aluminum, does not run or sag, and gives at least twice the coverage of conventional spray paint, so you buy fewer cans. The gloss finish will not chalk or fade in the sun, which makes it an ideal topcoat over RustSeal on anything that sits outside. One 12 oz can covers up to 30 sq ft in one coat.Apply to clean, dry surfaces. For the best rust protection, seal rusted metal with RustSeal first. Over freshly painted RustSeal 3 to 8 hours old, apply KBS Top Coater directly with no other prep. For all other surfaces, lightly sand or scuff with 320 grit, then clean with KBS Klean, rinse, and dry. Avoid solvent based cleaners, which leave a residue that hurts adhesion. Shake the can for at least one minute after the mixing ball rattles, and shake for about 10 seconds every 1 to 2 minutes while spraying. Spray in moderate to dry conditions, 70 percent humidity or lower. Use smooth, overlapping strokes and apply thin coats; if it runs or sags, the coat is too heavy or the can is too close. Apply one or two thin covering coats, or two to three for marine and industrial use. Recoat once the previous coat is dry to touch, typically 1 to 2 hours, and within 24 hours. To clear the tip, turn the can upside down and spray for 3 seconds. Clean overspray with KBS number 1 Thinner or lacquer thinner.
- Allis Chalmers Orange gloss finish in a 12 oz aerosol
- High solids formula gives at least twice the coverage of ordinary spray paint
- UV stable finish will not chalk or fade in the sun
- Bonds direct to bare steel and aluminum
- Ideal topcoat over RustSeal on equipment that lives outdoors
- For tractors, implements, trailers, gates, and equipment
- Thin coats do not run or sag on vertical surfaces
- Recoat once dry to touch, typically 1 to 2 hours
- Apply over fresh RustSeal 3 to 8 hours old with no other prep
- One 12 oz can covers up to 30 sq ft in one coat
| Brand | KBS Coatings |
|---|---|
| Country of Origin | Made in USA |
| Cleanup | Solvent |
| Container Size | 12 oz. |
| Coverage Area | 30 sq ft |
| Dry to Touch | 1 hr. |
| Features | High solids, UV stable aerosol topcoat for tractors, implements, trailers, and equipment. Bonds direct to bare metal and covers twice as much as ordinary spray paint |
| Finish | Gloss |
| Minimum Application Temperature | 60 deg. F |
| Package Quantity | 1 |
| Paint Base | Solvent |
| Recommended Number Of Coats | 2 |
| Time Before Recoating | 2 hr. |
| VOC Content | 489 g/l |
| Warranty | None |
| Manufacturer Part Number | 8818 |