KBS Coatings Fusion SEP, Self-Etch Primer, Aerosol Can

KBS Fusion SEP is a fast drying, all purpose self etching primer that gives topcoats a strong bond on bare steel, aluminum, brass, and most hard plastics. Use it on equipment repairs, trailer and truck parts, toolboxes, and plastic fuel tanks, and as the bonding coat when topcoating over cured RustSeal. It dries to the touch in about 15 minutes and is ready for KBS Top Coater, KBS MAXX, BlackTop, or Motor Coater after 1 hour. A single thin coat is usually all it takes. The medium grey aerosol covers about 35 sq ft.Apply between 55 and 82 F. Clean and dry the surface; KBS Klean is recommended if cleaning is needed. Shake the can for at least one minute after the mixing ball moves freely and hold it 10 to 14 inches from the surface. Apply one light coat, or 2 to 3 light to medium coats 3 to 5 minutes apart when needed. Clear the tip after use by turning the can upside down and spraying until it runs clear. Allow 1 hour before sanding, priming, or topcoating. Topcoat within 24 hours with no scuffing; after 7 days, scuff with 300 grit first. Clean up immediately with KBS number 1 Thinner or lacquer thinner.