$24.99
Kat's Engine Heaters 120V 90W Dipstick Heater, 24 in.
Kat's Engine Heaters 120V 90W Dipstick Heater, 24 in.
3.097 Reviews
Item # 191932
$24.99
Get everything you need
Neighbor’s Club Members earn points with purchases.
Kat's Engine Heaters 120V 90W Dipstick Heater, 24 in.
3.097 Reviews
Item # 191932
$24.99
New Cardmembers earn a $20 Reward‡ with qualifying purchase of $20 or more plus earn 5% in Rewards+ on this purchase. Valid through 6/28/26.Apply now
Shopping at
Grassland (franklin) TN
Delivery to
37027
Pickup Nearby at FRANKLIN TN(6.7) miles Free
Ship to store at Franklin TN
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Get everything you need
Neighbor’s Club Members earn points with purchases.
The Kat's Engine Heaters 90W Dipstick Heater keeps your workspace warm on cold days. Measuring 24 in. long, this dipstick block heater must be submerged in 4 in. of oil for optimal performance and features 90 W/120V power. Kat's Dipstick Heater is backed by a 1-year limited warranty.
- Must be submerged in 4 in. of oil
- Dipstick block heater is 24 in. long
- Power: 90 W/120V
- Kat's Dipstick Heater is backed by a 1-year limited warranty
Similar Items
-
-
-
-
-
-
Top Rated
-
-
-
-
-
-
Items You May Like
-
-
-
-
-
-
Top Rated
-
-
-
Top Rated
-
Customers Also Bought
-
-
-
-
-
-
Top Rated
-
-
-
Top Rated
-
-
Top Rated
-
Top Rated
Reviews
Summary of Reviews
The product has mixed reviews. Some customers found it effective in warming engine oil and aiding cold weather starting, particularly for heavy equipment. However, many experienced significant issues,...
Most Helpful Favorable Review
5 out of 5 stars.
Oil Heater
6 years ago
I was looking for an oil dip stick on the internet and found Kats. It works very well to heat up my oil on my cub cadet tractor when temperatures are below 50 degrees. The dip stick heater heats up very quickly and warms up the oil in a very short time. So far I used it twice and made starting the tractor so much easier. The stick is not flexible so it will insert a few inches into the oil case. It s enough to heat the oil on a 19hp engine.
I recommend this dip stick oil heater
9 people found this helpful
Show Reviews:
Most Helpful Critical Review
1 out of 5 stars.
Catastophic failure
8 years ago
Received this, it was in a box too small and was bent slightly to make it fit. Straightened it, placed it in dipstick tube and plugged it in. Immediately there was crackling and smoking, the top of the unit became red hot. Unplugged, tried to pull it out and the plastic top separated (melted) from the stick and came off in my hand. Pulled out the smoking stick with pliers; only half came out as the unit was internally shorted running 120 vac through the dipstick tube and melting the rod in half. Still have not retrieved the bottom of the rod from the oil pan.
11 people found this helpful
Show Reviews:
Customer Images and Videos
- purchase
- starting
- engine performance
- returns
- engine start
- for cold weather
- price
- for cold weather
1 to 4 of 97 Reviews .
1 – 4 of 97 Reviews
Most Recent
Anonymous
Review 1
5 out of 5 stars.
Good value
3 months ago
Works as adverised.
SweepstakesYes
Missouri, USA
Review 1
1 out of 5 stars.
It's a joke
3 months ago
I removed the packaging and plugged it in to make sure it worked before I installed it. Within about two seconds it sizzled the skin on the inside of my fingers and I immediately unplugged it. I went ahead and put it in my Ford 8n and it didn't last the first night. I measured the depth of the oil in the oil pan, and it was right at 3 3/4". One wouldn't think 1/4" would have been enough to cause it to burn out on a 10-degree night but it did. This heater is a dangerous piece of junk. Save yourself some time, aggravation, and money, and pass on this product.
No, I do not recommend this product.
Near Buffalo, NY
Review 1
1 out of 5 stars.
Worked once on tractor
3 months ago
I bought this to heat the oil in my tractor, gas Farmall 706. It's been around 0F or below for weeks and hoped this would help. It did, ONCE. Pulled it out and it was clearly working, next day, nothing. Day after, nothing. Put it in a vice in my basement and plugged it in. Not even warm. It's also very rigid and you're not supposed to bend it but it's impossible to get it to the oil pan without doing so. Even bent it worked the 1st time. Brought it back 3 days later and got full refund at Tractor Supply. I changed to oil to a lighter weight and that helped immensely, oil needed changing anyway. I also always keep a heat lamp on hydraulic filter to aid in cold starts.
No, I do not recommend this product.
Review 1
1 out of 5 stars.
not good
3 months ago
bought 2,both bad right out of package
No, I do not recommend this product.