CountyLine 6 ft. Grader Blade, GB6CL
CountyLine 6 ft. Grader Blade, GB6CL
Item # 213003999
Notice:
This Item cannot be shipped to CA, CO, HI, ID, IA, KS, MN, MT, NE, NV, NM, ND, OR, SD, TX, WA, WI, WY.
Neighbor’s Club Members earn points with purchases.
Notice:
This Item cannot be shipped to CA, CO, HI, ID, IA, KS, MN, MT, NE, NV, NM, ND, OR, SD, TX, WA, WI, WY.Neighbor’s Club Members earn points with purchases.
The CountyLine 6 ft. Grader Blade is ideal for your grading or scraping needs, such as sand, snow, or gravel. It's built with a pull-pin design with 5 reversible blade angle adjustments to fit your needs and ensure the job gets done. Pair it with any compatible 20-45 hp tractor. Category 1 pins do come included with the blade. Measures 38 in. H x 72 in. W x 40 in. L.NOTE: Contact your local Tractor Supply store for specific information about this product.
For additional information on this product, please see the Product Documents section for all downloadable user manuals, installation guides, brochures and warranty statements.
- Unit works efficiently up to 20-45 hp on tractors
- Pull-pin design with 5 reversible blade angle adjustments
- 1/4 in. blade with 1/2 in. thick replaceable cutting edge
- Category 1 pins included
- 38 in. H x 72 in. W x 40 in. L, 15 in. blade height
| Brand | CountyLine |
|---|---|
| Country of Origin | Made in USA |
| Compatibility | 20 - 45 hp |
| Cutting Edge Material | Steel |
| Hitch Type | Category 1 |
| Maximum Offset Left | 5 FWD 5 REV up to 45 deg. right or left |
| Maximum Offset Right | 5 FWD 5 REV up to 45 deg. right or left |
| Maximum Tractor Horsepower | 45 hp |
| Minimum Tractor Horsepower | 25 hp |
| Moldboard Height | 15 in. |
| Moldboard Thickness | 0.25 in. |
| Number Of Flanges | 1 |
| Number Of Forward Positions | 5 |
| Number Of Reverse Positions | 5 |
| Number Of Shank Adjustments | N/A |
| Number Of Shanks | N/A |
| Primary Color | Yellow |
| Primary Material | Steel |
| Product Height | 15 in. |
| Product Length | 40 in. |
| Product Weight | 213 lb. |
| Product Width | 72 in. |
| Working Width | 72 in. |
| Manufacturer Part Number | GB6CL |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 173 Questions
Newest questions
Q: Would you recommend this for a Mahindra emax 20s
7 months ago1 Answer
- A: No, this tractor does not meet the horsepower requirements for this unit. No recommendations.7 months agoHelpful?
Q: What modle will work with a jd 1025r cat 1 hitch
8 months ago1 Answer
- A: Recommended sku# for this tractor would be 1637225.7 months agoHelpful?
Q: I need to reach about 10 inches on the right side to clear out side of trench. Will this stick out on right side beyond back tire?
8 months ago1 Answer
- A: This would be dependent upon the width of tractor. This unit does not off set and runs directly behind the tractor.7 months agoHelpful?
Q: Will this fit a bad boy 1025h tractor
11 months ago1 Answer
- A: No, this tractor does not meet the horsepower requirements for this unit. Recommended sku# is 1549565.11 months agoHelpful?
Q: is it quick hitch compatible
a year ago1 Answer
- A: Yes.a year agoHelpful?
Q: Does it have a warranty?
a year ago1 Answer
- A: This unit has a 1 year warranty from the date of purchase to cover any manufacturing defects.a year agoHelpful?
Q: How much does it weigh?
a year ago1 Answer
- A: It weighs approximately 215 lbs.a year agoHelpful?
Q: Will this fit a 3043 John Deere
a year ago1 Answer
- A: Yes, this should be compatible with this unit.a year agoHelpful?
Q: Will this fit a Branson 2400
a year ago1 Answer
- A: Yes, this should be compatible with this this unit.a year agoHelpful?
Q: would it fit a L2800 Kubota?
a year ago1 Answer
- A: Unit works efficiently up to 20-45 HP on tractorsa year agoHelpful?
1 - 10 of 173 Questions
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 173 Questions
Newest questions
Q: Would you recommend this for a Mahindra emax 20s
7 months ago1 Answer
- A: No, this tractor does not meet the horsepower requirements for this unit. No recommendations.7 months agoHelpful?
Q: What modle will work with a jd 1025r cat 1 hitch
8 months ago1 Answer
- A: Recommended sku# for this tractor would be 1637225.7 months agoHelpful?
Q: I need to reach about 10 inches on the right side to clear out side of trench. Will this stick out on right side beyond back tire?
8 months ago1 Answer
- A: This would be dependent upon the width of tractor. This unit does not off set and runs directly behind the tractor.7 months agoHelpful?
Q: Will this fit a bad boy 1025h tractor
11 months ago1 Answer
- A: No, this tractor does not meet the horsepower requirements for this unit. Recommended sku# is 1549565.11 months agoHelpful?
Q: is it quick hitch compatible
a year ago1 Answer
- A: Yes.a year agoHelpful?
Q: Does it have a warranty?
a year ago1 Answer
- A: This unit has a 1 year warranty from the date of purchase to cover any manufacturing defects.a year agoHelpful?
Q: How much does it weigh?
a year ago1 Answer
- A: It weighs approximately 215 lbs.a year agoHelpful?
Q: Will this fit a 3043 John Deere
a year ago1 Answer
- A: Yes, this should be compatible with this unit.a year agoHelpful?
Q: Will this fit a Branson 2400
a year ago1 Answer
- A: Yes, this should be compatible with this this unit.a year agoHelpful?
Q: would it fit a L2800 Kubota?
a year ago1 Answer
- A: Unit works efficiently up to 20-45 HP on tractorsa year agoHelpful?
1 - 10 of 173 Questions
Similar Items
-
-
-
Top Rated
-
-
-
-
-
-
-
Top Rated
-
Top Rated
-
Items You May Like
-
-
Top Rated
-
Top Rated
-
-
-
-
-
-
-
-
-
Top Rated
Customers Also Bought
-
Top Rated
-
-
-
-
-
-
-
-
-
-
-
Reviews
- purchase
- price
- for snow
- satisfaction
- quality
- value
- removal
- functional
1 to 4 of 375 Reviews .
1 – 4 of 375 Reviews
Most Recent
Review 1
4 out of 5 stars.
Blade
3 days ago
The managers where a great help
SweepstakesYes
Reviews 7
5 out of 5 stars.
Heavy duty
15 days ago
Same size as my old (broken) blade but twice as heavy! All the steel is noticeably thicker and the welds are very good. At a distance it’s identical to my old blade but once you’re up close, the differences are obvious. This is a much better choice.
SweepstakesYes
Yes, I recommend this product.
Reviews 2
5 out of 5 stars.
Using to clear snow
2 months ago
Have not had an opportunity to use it yet, but it looks like it will do the job clearing snow.
Yes, I recommend this product.
Norridgewock Maine
Review 1
4 out of 5 stars.
Not bad for the money.
2 months ago
For the money , can't complain. I use it for snow removal. I have a 2021 TYM T394 tractor and it works great.
Yes, I recommend this product.