Bulldog 2,000 lb. Capacity Side-Mounted Side Wind Round Weld-on Trailer Jack, 10 in. Travel
Bulldog 2,000 lb. Capacity Side-Mounted Side Wind Round Weld-on Trailer Jack, 10 in. Travel
Item # 11638099
$84.99
Get everything you need
Neighbor’s Club Members earn points with purchases.
Bulldog 2,000 lb. Capacity Side-Mounted Side Wind Round Weld-on Trailer Jack, 10 in. Travel
Item # 11638099
$84.99
New Cardmembers earn a $75 Reward‡ with qualifying purchase of $75 or more plus earn 5% in Rewards+ on this purchase. Valid through 7/12/26.
Out of stock at or near
Grassland (franklin) TN
Delivery to
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Get everything you need
Neighbor’s Club Members earn points with purchases.
The Bulldog 2,000 lb. Capacity Side-Mounted Side Wind Round Weld-on Trailer Jack is tough and trusted, built with uncompromising strength and materials engineered to hold up under rigorous working conditions. The Bulldog round jacks have a smooth, comfortable and ergonomic design that sets the industry standard within the agricultural, commercial, horse and livestock trailer and other trailer markets. Made of dependable materials, this trailer jack is built to hold up through a variety of hauling applications.
Looking for more information on truck accessories? Check out our guide on truck accessories in the product documents section.
- Smooth, comfortable and ergonomic design
- Dependable vertical and side load capacity
- Proven reliability for long-term use at rated loads
- Precision fitted parts for extra stability
- A-frame models listed have gray painted outer and inner tubes; all other models have gray painted outer and clear zinc inner tubes
- Custom finishes are available for the trailer jack upon request
| Brand | Bulldog |
|---|---|
| Country of Origin | Imported |
| Base Type | Foot plate |
| Compatibility | Trailers |
| Crank Type | Side Wind |
| Extended Height | 21 in. |
| Features | Smooth, comfortable, ergonomic design |
| Handle Length | 0 N/A |
| Hoist Lift Height | 12 in |
| Hoist Weight Capacity | 2000 lb |
| Lift Capacity | 2,000 lb. |
| Mechanism Type | Hydraulic |
| Mounting Type | Weld-On |
| Power Type | None |
| Primary Material | Steel |
| Product Height | 3.4 in. |
| Product Length | 17 in. |
| Product Weight | 11.9 lb. |
| Product Width | 4.4 in. |
| Retracted Height | 11 in. |
| Tube Width | 0 N/A |
| Manufacturer Part Number | 151101TS |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 9 of 9 Questions
Newest questions
Q: Is the hole to mount on welded on bracket where the snap ring attaches 2.5 inches in diameter?
11 months ago1 Answer
- A: Hello, thank you for your question. Per the vendor, "The diameter of the mounting hole (where the snap ring attaches to the welded-on bracket) for the Bulldog 2,000 lb. Capacity Side-Mounted Trailer Jack (Part Number: 151101TS) is 2.25 inches, not 2.5 inches. This size is standard for snap-ring style weld-on brackets used with this model."11 months agoHelpful?
Q: Mine has a grease fitting on it. How much grease should I apply? I have the 2000 pound weld on swivel jack.
a year ago1 Answer
- A: Hello, thank you for your question. According to the user manual, "The following procedures should be performed at least annually: For side-wind models, the internal gearing and bushings of the jack must be kept lubricated. Apply a small amount of automotive grease to the internal gearing by removing the jack cover, or if equipped, use a needle nose applicator or standard grease gun on the lubrication point found on the side of the jack near the crank. Rotate the jack handle to distribute the grease evenly. A lightweight oil must be applied to the handle unit at both sides of the tube for side-wind models. If equipped, the axle bolt and nut assembly of the caster wheel must also be lubricated with the same light weight oil. For top-wind models, apply a lightweight oil to the screw stem. If this product is used in a marine environment, flush the jack assembly and bushings with fresh water, and apply fresh lubricant." https://media.tractorsupply.com/is/content/TractorSupplyCompany/tsc/product/1/16/38/0/116380_Man1.pdf?a year agoHelpful?
Q: What size is the large snap ring at the swivel mount?
3 years ago1 Answer
- A: Hi, For such a specific product request, please reach out to Bulldog at https://www.bulldogproducts.net/ContactUs OR CUSTOMER SUPPORT Customer Service Line 800-632-3290 Monday - Friday 8:00am ‑ 6:00pm EST3 years agoHelpful?
Q: Can you tell me if this jack swivels for storage while under way? Or is it attached permanently vertical?
3 years ago1 Answer
- A: Hi! Fully retract and rotate jack before towing. This product is not intended to be used as a transport device for the implement it is attached to. Minimize movement of implement while jack is under load. Here is the manual for this item for additional information. https://media.tractorsupply.com/is/content/TractorSupplyCompany/tsc/product/1/16/38/0/116380_Man1.pdf3 years agoHelpful?
Q: i would like to know if it is possible to have the STEP file or technical drawins with his dimension to have a betther idea if will work in my desing. Regards, Juan Mosquera
4 years ago1 Answer
- A: Form emailed to customer.4 years agoHelpful?
Q: What's the load limit
4 years ago1 Answer
- A: Support Capacity: 2,000 lb.4 years agoHelpful?
Q: Is the foot removable so I may install the Bulldog caster?
4 years ago1 Answer
- A: For additional product support, please contact 800-632-3290.4 years agoHelpful?
Q: What is the difference between your weld-on trailer jack, part number 151101TS and your weld-on trailer jack, part number 151101. (My e-mail address is valid, not a joke.)
Anonymous4 years ago1 Answer
- A: There is no functional difference between these two items – one has the Tractor Supply designator and the other doesn’t.4 years agoHelpful?
Q: What size is the snap ring
4 years ago1 Answer
- A: Please check your email.4 years agoHelpful?
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 9 of 9 Questions
Newest questions
Q: Is the hole to mount on welded on bracket where the snap ring attaches 2.5 inches in diameter?
11 months ago1 Answer
- A: Hello, thank you for your question. Per the vendor, "The diameter of the mounting hole (where the snap ring attaches to the welded-on bracket) for the Bulldog 2,000 lb. Capacity Side-Mounted Trailer Jack (Part Number: 151101TS) is 2.25 inches, not 2.5 inches. This size is standard for snap-ring style weld-on brackets used with this model."11 months agoHelpful?
Q: Mine has a grease fitting on it. How much grease should I apply? I have the 2000 pound weld on swivel jack.
a year ago1 Answer
- A: Hello, thank you for your question. According to the user manual, "The following procedures should be performed at least annually: For side-wind models, the internal gearing and bushings of the jack must be kept lubricated. Apply a small amount of automotive grease to the internal gearing by removing the jack cover, or if equipped, use a needle nose applicator or standard grease gun on the lubrication point found on the side of the jack near the crank. Rotate the jack handle to distribute the grease evenly. A lightweight oil must be applied to the handle unit at both sides of the tube for side-wind models. If equipped, the axle bolt and nut assembly of the caster wheel must also be lubricated with the same light weight oil. For top-wind models, apply a lightweight oil to the screw stem. If this product is used in a marine environment, flush the jack assembly and bushings with fresh water, and apply fresh lubricant." https://media.tractorsupply.com/is/content/TractorSupplyCompany/tsc/product/1/16/38/0/116380_Man1.pdf?a year agoHelpful?
Q: What size is the large snap ring at the swivel mount?
3 years ago1 Answer
- A: Hi, For such a specific product request, please reach out to Bulldog at https://www.bulldogproducts.net/ContactUs OR CUSTOMER SUPPORT Customer Service Line 800-632-3290 Monday - Friday 8:00am ‑ 6:00pm EST3 years agoHelpful?
Q: Can you tell me if this jack swivels for storage while under way? Or is it attached permanently vertical?
3 years ago1 Answer
- A: Hi! Fully retract and rotate jack before towing. This product is not intended to be used as a transport device for the implement it is attached to. Minimize movement of implement while jack is under load. Here is the manual for this item for additional information. https://media.tractorsupply.com/is/content/TractorSupplyCompany/tsc/product/1/16/38/0/116380_Man1.pdf3 years agoHelpful?
Q: i would like to know if it is possible to have the STEP file or technical drawins with his dimension to have a betther idea if will work in my desing. Regards, Juan Mosquera
4 years ago1 Answer
- A: Form emailed to customer.4 years agoHelpful?
Q: What's the load limit
4 years ago1 Answer
- A: Support Capacity: 2,000 lb.4 years agoHelpful?
Q: Is the foot removable so I may install the Bulldog caster?
4 years ago1 Answer
- A: For additional product support, please contact 800-632-3290.4 years agoHelpful?
Q: What is the difference between your weld-on trailer jack, part number 151101TS and your weld-on trailer jack, part number 151101. (My e-mail address is valid, not a joke.)
Anonymous4 years ago1 Answer
- A: There is no functional difference between these two items – one has the Tractor Supply designator and the other doesn’t.4 years agoHelpful?
Q: What size is the snap ring
4 years ago1 Answer
- A: Please check your email.4 years agoHelpful?
Similar Items
-
-
-
-
-
-
-
Top Rated
-
Top Rated
-
-
Top Rated
-
-
Top Rated
Items You May Like
-
-
-
Top Rated
-
Top Rated
-
-
-
-
-
-
Top Rated
-
-
Top Rated
Reviews
Summary of Reviews
The product appears to be a high-quality and reliable trailer jack with smooth operation and sturdy construction. It was reported to work well for a variety of trailer types and sizes, handling the we...
- English
- German
- French
- Spanish
- Portuguese
- Italian
- Korean
- Chinese
- Japanese
- Arabic
- installation
- purchase
- quality
- small
1 to 4 of 89 Reviews .
1 – 4 of 89 Reviews
Most Recent
North Dakota
Reviews 2
5 out of 5 stars.
Good 2000# jack.
a year ago
Bought to replace a top wind jack that was factory mounted too close to a tool box.
Works well.
SweepstakesYes
Yes, I recommend this product.
Cape Coral FL
Reviews 2
5 out of 5 stars.
Easy Install.
a year ago
Works awesome, love the grease fitting too. Keep in mind this needs to be welded on, but it only took 30 minutes. You have to grind the paint off to get a good ground to weld it, but easily remedied with a can of high quality paint.
SweepstakesYes
Yes, I recommend this product.
Albany, NY
Reviews 2
5 out of 5 stars.
Works as intended
a year ago
Works well. Not hard to install
SweepstakesYes
Yes, I recommend this product.
cornelia ga.
Review 1
5 out of 5 stars.
bulldog trailer jack
a year ago
had to trade it for a top winder, works great. was able to remove it from mount and use the old mount, works great
SweepstakesYes