Traveller 500A Electrical Clamps, 1-Pair
Traveller 500A Electrical Clamps, 1-Pair
Item # 475263
$19.99
Get everything you need
Neighbor’s Club Members earn points with purchases.
$19.99
Shopping at
Grassland (franklin) TN
Delivery to
Pickup Nearby at THOMPSONS STATION TN(14) miles Free
Ship to store at Franklin TN
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Get everything you need
Neighbor’s Club Members earn points with purchases.
The Traveller Electrical Clamps are rated for 500A. These steel clamps are suitable for battery chargers, booster cables and electrical equipment. Sold in pairs.
- 500 AMP Steel clamps
- For battery chargers, booster cable, and electrical equipment
| Brand | Traveller |
|---|---|
| Country of Origin | Imported |
| Clamp Type | Other |
| Compatible Cable Diameter | 12mm |
| Features | Vinyl coated with better corrosion resistance and insulation |
| Finish | Copper |
| Minimum Torque | 0.867 ft. - lb. |
| Package Quantity | 2 pcs |
| Primary Material | Steel |
| Product Height | 1.42 in. |
| Product Length | 10.55 in. |
| Product Weight | 0.683 lb. |
| Product Width | 6.85 in. |
| Manufacturer Part Number | 1055 |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 5 of 5 Questions
Newest questions
Q: how do I attach the wire to the clamp? I don't understand the instructions. Do you have a video?
2 years ago1 Answer
- A: 1. Remove 0.5” of the insulating shell from the cable to expose the inner conductor. 2. Loosen the bolt from the clamp mouth to separate the jaw from it, and keep the bolt. 3. Make the cable go through the clamp from end to reach the clamp mouth, and put the exposed conductor in between the clamp mouth and the jaw. 4. Fasten the jaw and clamp mouth with the loosened bolt. No we do not have a video of instructions.2 years agoHelpful?
Q: Assembly makes no sense! Picture please!
4 years ago1 Answer
- A: Please contact Customer Service at (888) 376-9601 available Monday-Friday 8am-8pm (EST), Saturday 8am-5pm (EST), so we can better assist you.4 years agoHelpful?
Q: How do I attach the cables to the clamps? The instructions are extremely vague.
5 years ago1 Answer
- A: 1. Remove 0.5” of the insulating shell from the cable to expose the inner conductor. 2. Loosen the bolt from the clamp mouth to separate the jaw from it, and keep the bolt. 3. Make the cable go through the clamp from end to reach the clamp mouth, and put the exposed conductor in between the clamp mouth and the jaw. 4. Fasten the jaw and clamp mouth with the loosened bolt.5 years agoHelpful?
Q: How do you attach the wire to these clamps? it only has one set of tabs and the instructions are not very clear. Someone said the answer is in the "attachment" but i dont know what that means
5 years ago1 Answer
- A: Please refer to your e-mail inbox for the requested information.5 years agoHelpful?
Q: Having trouble understanding how to wire new clamps on , what does the bare wire clip to on the clamp? I understand the where the rubber clamps to but what holds the bare wire?
7 years ago1 Answer
- A: Please review the attachment for requested information.6 years agoHelpful?
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 5 of 5 Questions
Newest questions
Q: how do I attach the wire to the clamp? I don't understand the instructions. Do you have a video?
2 years ago1 Answer
- A: 1. Remove 0.5” of the insulating shell from the cable to expose the inner conductor. 2. Loosen the bolt from the clamp mouth to separate the jaw from it, and keep the bolt. 3. Make the cable go through the clamp from end to reach the clamp mouth, and put the exposed conductor in between the clamp mouth and the jaw. 4. Fasten the jaw and clamp mouth with the loosened bolt. No we do not have a video of instructions.2 years agoHelpful?
Q: Assembly makes no sense! Picture please!
4 years ago1 Answer
- A: Please contact Customer Service at (888) 376-9601 available Monday-Friday 8am-8pm (EST), Saturday 8am-5pm (EST), so we can better assist you.4 years agoHelpful?
Q: How do I attach the cables to the clamps? The instructions are extremely vague.
5 years ago1 Answer
- A: 1. Remove 0.5” of the insulating shell from the cable to expose the inner conductor. 2. Loosen the bolt from the clamp mouth to separate the jaw from it, and keep the bolt. 3. Make the cable go through the clamp from end to reach the clamp mouth, and put the exposed conductor in between the clamp mouth and the jaw. 4. Fasten the jaw and clamp mouth with the loosened bolt.5 years agoHelpful?
Q: How do you attach the wire to these clamps? it only has one set of tabs and the instructions are not very clear. Someone said the answer is in the "attachment" but i dont know what that means
5 years ago1 Answer
- A: Please refer to your e-mail inbox for the requested information.5 years agoHelpful?
Q: Having trouble understanding how to wire new clamps on , what does the bare wire clip to on the clamp? I understand the where the rubber clamps to but what holds the bare wire?
7 years ago1 Answer
- A: Please review the attachment for requested information.6 years agoHelpful?
Similar Items
-
-
-
Top Rated
-
Top Rated
-
Top Rated
-
-
-
Top Rated
-
-
Top Rated
-
-
Items You May Like
-
-
Top Rated
-
Top Rated
-
Top Rated
-
-
Top Rated
-
-
Top Rated
-
Top Rated
Customers Also Bought
-
-
-
-
Top Rated
-
Top Rated
-
-
Top Rated
-
Top Rated
-
Top Rated
-
-
-
Reviews
- quality
- shortcoming
1 to 1 of 1 Review .
1 – 1 of 1 Review
Most Recent
myrtle beach sc
Reviews 3
1 out of 5 stars.
junk
4 years ago
Junk poorly made one broke before I hooked it to the cable
No, I do not recommend this product.