TISCO Tractor Ignition Coil for 12V Systems
TISCO Tractor Ignition Coil for 12V Systems
Item # 107963199
$69.51
Neighbor’s Club Members earn points with purchases.
$69.51
This item is available online only
Delivery to
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Neighbor’s Club Members earn points with purchases.
The TISCO Tractor Ignition Coil for 12V Systems is an essential part to getting the job done right. This heavy-duty tractor coil is for electronic ignition and delivers up to 40,000V and has 3 OHMs of resistance. The ignition coil interchanges 1100-5199, A510627, 11005199, 40511, 957631 and A21A330.
- High-performance, heavy-duty tractor ignition coil for electronic ignition
- For 12V systems
- 1-year limited warranty
- 3 OHMs resistance
- 12V ignition coil delivers up to 40,000V
- Interchanges: 1100-5199, A510627, 11005199, 40511, 957631 and A21A330
| Brand | TISCO |
|---|---|
| Country of Origin | Made in USA |
| Brand Compatibility | AC-Delco |
| Grounded or Non-Grounded | Grounded |
| Model Compatibility | 0 N/A |
| Number of Posts | 4 |
| Package Quantity | 1 |
| Primary Material | Other |
| Product Height | 7 in. |
| Product Length | 7 in. |
| Product Weight | 1.5 lb. |
| Product Width | 7 in. |
| Tractor Ignition Part Type | Coils |
| Voltage | 12V |
| Warranty | 1 Year Limited |
| Manufacturer Part Number | EHDC |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 12 Questions
Newest questions
Q: Does this coil fit a 1964 ford 4000 gas with electronic ignition ?
3 months ago1 Answer
- A: Yes this coil fits the Ford 4000 with electronic ignition3 months agoHelpful?
Q: What coil needed for Ford 2000 12 volt system
2 years ago1 Answer
- A: This coil will work for a 12-volt Ford 2000. This coil has 3 ohms internal resistance whereas the original coil for Ford 2000 12-volt system was approximately 1.2 ohms. This coil is specifically designed to be used with 12-volt system that has been converted to electronic ignition however will work with standard points and condenser.2 years agoHelpful?
Q: will this coil work for a IH 574?
2 years ago1 Answer
- A: Yes this coil will work on a 12 volt IH 574.2 years agoHelpful?
Q: Is this the correct 12v product for a Ford jubille N8 tractor ?
Anonymous3 years ago1 Answer
- A: Hi, Check your Ford Jubille owner's manual to verify, but it should. See below- Interchanges: 1100-5199, A510627, 11005199, 40511, 957631, A21A3303 years agoHelpful?
Q: Which coil do I use for a 12v 1953 Super H Tractor?
3 years ago1 Answer
- A: Without a model number I wouldnt not be able to recommend a coil.3 years agoHelpful?
Q: Which ignition coil do I use for a 1964 Ford 2000 4-cylinder?
3 years ago1 Answer
- A: For technical support, please contact Ignition Coil.3 years agoHelpful?
Q: Where are the models #?????? Where can I input the model I am looking for. Useless Site.
4 years ago1 Answer
- A: The model number for this ignition coil is listed within the title. It is model number EHDC.4 years agoHelpful?
Q: Will this work for a Ford 3600 gas tractor?
4 years ago1 Answer
- A: We are showing item D5TE12029AB would be the ignition coil that would work for your Ford 3600 gas tractor. This item can be special ordered at your local Tractor Supply Store.4 years agoHelpful?
Q: Need ignition coil for 1949 International harvester model A tractor please. I believe a 6 volt is sufficient.
6 years ago1 Answer
- A: Item ID 306546R93 is what you are looking for. This item is available by special order.6 years agoHelpful?
Q: Does this one need to be used with an external resistor? We are trying to get a replacement one for a Ferguson TO-20 that runs WITHOUT external resistor.
7 years ago1 Answer
- A: This coil has 3 ohms of resistance which will be adequate to be used without an external resistor. The TO20 system generally used a 1 to 1.5 ohm coil with a resistor of a similar capacity.7 years agoHelpful?
1 - 10 of 12 Questions
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 12 Questions
Newest questions
Q: Does this coil fit a 1964 ford 4000 gas with electronic ignition ?
3 months ago1 Answer
- A: Yes this coil fits the Ford 4000 with electronic ignition3 months agoHelpful?
Q: What coil needed for Ford 2000 12 volt system
2 years ago1 Answer
- A: This coil will work for a 12-volt Ford 2000. This coil has 3 ohms internal resistance whereas the original coil for Ford 2000 12-volt system was approximately 1.2 ohms. This coil is specifically designed to be used with 12-volt system that has been converted to electronic ignition however will work with standard points and condenser.2 years agoHelpful?
Q: will this coil work for a IH 574?
2 years ago1 Answer
- A: Yes this coil will work on a 12 volt IH 574.2 years agoHelpful?
Q: Is this the correct 12v product for a Ford jubille N8 tractor ?
Anonymous3 years ago1 Answer
- A: Hi, Check your Ford Jubille owner's manual to verify, but it should. See below- Interchanges: 1100-5199, A510627, 11005199, 40511, 957631, A21A3303 years agoHelpful?
Q: Which coil do I use for a 12v 1953 Super H Tractor?
3 years ago1 Answer
- A: Without a model number I wouldnt not be able to recommend a coil.3 years agoHelpful?
Q: Which ignition coil do I use for a 1964 Ford 2000 4-cylinder?
3 years ago1 Answer
- A: For technical support, please contact Ignition Coil.3 years agoHelpful?
Q: Where are the models #?????? Where can I input the model I am looking for. Useless Site.
4 years ago1 Answer
- A: The model number for this ignition coil is listed within the title. It is model number EHDC.4 years agoHelpful?
Q: Will this work for a Ford 3600 gas tractor?
4 years ago1 Answer
- A: We are showing item D5TE12029AB would be the ignition coil that would work for your Ford 3600 gas tractor. This item can be special ordered at your local Tractor Supply Store.4 years agoHelpful?
Q: Need ignition coil for 1949 International harvester model A tractor please. I believe a 6 volt is sufficient.
6 years ago1 Answer
- A: Item ID 306546R93 is what you are looking for. This item is available by special order.6 years agoHelpful?
Q: Does this one need to be used with an external resistor? We are trying to get a replacement one for a Ferguson TO-20 that runs WITHOUT external resistor.
7 years ago1 Answer
- A: This coil has 3 ohms of resistance which will be adequate to be used without an external resistor. The TO20 system generally used a 1 to 1.5 ohm coil with a resistor of a similar capacity.7 years agoHelpful?
1 - 10 of 12 Questions
Similar Items
-
-
-
-
-
Top Rated
-
-
-
-
Top Rated
-
-
-
Items You May Like
-
-
Top Rated
-
-
-
-
-
-
-
-
Top Rated
-
-
Customers Also Bought
-
-
-
-
-
-
-
-
-
-
-
-
Top Rated
Reviews
1 to 0 of 1 Review .