REMCO 2.2 GPM Extreme Duty 12V Sprayer Pump with 3/8 in. FNPT Ports, 60 PSI, On Demand
$109.99
REMCO 2.2 GPM Extreme Duty 12V Sprayer Pump with 3/8 in. FNPT Ports, 60 PSI, On Demand
REMCO 2.2 GPM Extreme Duty 12V Sprayer Pump with 3/8 in. FNPT Ports, 60 PSI, On Demand
Item # 1294453
Stocked & Ready
$109.99
Get everything you need
Neighbor’s Club Members earn points with purchases.
REMCO 2.2 GPM Extreme Duty 12V Sprayer Pump with 3/8 in. FNPT Ports, 60 PSI, On Demand
Item # 1294453
Stocked & Ready
$109.99
New Cardmembers earn a $20 Reward‡ with qualifying purchase of $20 or more plus earn 5% in Rewards+ on this purchase. Valid through 8/9/26.
Shopping at
Grassland (franklin) TN
Delivery to
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Get everything you need
Neighbor’s Club Members earn points with purchases.
REMCO's Extreme Duty 2.2 GPM on demand sprayer pump is perfect for use with harsh oil based chemicals and surfactants like Diesel. The Extreme-Duty Pump is driven by a sealed 12 volt electric motor and has a pressure setting of 60 PSI, making it the perfect match for Extreme duty cycles. In the most Extreme environments this pump offers world class efficiency with high flow rates and low operating temperature. Its 3/8" FNPT ports allow for easy fluid connection to any type of spray system. With its robust material combination of Nylon and Viton the Extreme Duty is compatible is Diesel Warning : This is not a fuel pump and should be used in such manner and is not recommended for use with flammable or combustible liquidsPackage Contents: 1 - Extreme Duty 2.2 GPM, 60 PSI on Demand, 12 Volt Sprayer pump with 3/8" FNPT Ports
For additional information on this product, please see the Product Documents section for all downloadable user manuals, installation guides, brochures and warranty statements.
Looking for more information on sprayers? Check out our guide on agricultural and lawn sprayers in the product documents section.
- 2.2 GPM, 60 PSI on Demand, 12 VDC, 3/8" FNPT ports
- Compatible with harsh oil based chemicals and surfactants such as Diesel
- Capable of being run dry
- Self priming up to 8' vertically
- 6" length 14 AWG wire leads wit SAE 2 pin connector
- Compatible with most common agricultural spray chemicals like herbicides, fertilizers, and insecticides
- Warning : This is not a fuel pump and should not be used in such manner. It is not recommended for use with flammable or combustible liquids
| Brand | REMCO |
|---|---|
| Country of Origin | Made in USA |
| Compatibility | Compatible harsh oil based chemicals and surfactants |
| Discharge Connection | Threaded Female |
| Discharge Port Diameter | 0.375 in. |
| Inlet Connection | Threaded Female |
| Inlet Diameter | 0.375 in. |
| Maximum Flow Rate | 2.2 GPM |
| Maximum Head Lift | 8 ft. |
| Maximum Operating Pressure | 60 PSI |
| Maximum Operating Temperature | 180 deg. F |
| Maximum Suction Lift | 8 ft. |
| Minimum Operating Pressure | 0 PSI |
| Package Quantity | 1 |
| Power Cord Length | 6 in. |
| Primary Color | Black |
| Primary Material | Nylon |
| Product Height | 3.8 in. |
| Product Length | 9.3 in. |
| Product Weight | 6 lb. |
| Product Width | 4.1 in. |
| Pump/Repair Product Type | Pumps |
| Warranty | 1 Year |
| Manufacturer Part Number | 90-3323-1E3-82B-SB |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 7 of 7 Questions
Newest questions
Q: How long is the warranty for this item
a month ago2 Answers
- A: Remco warrants products to be free from factory defects for a period of 1 year not to exceed 2 years from the manufacturing date.a month agoHelpful?
Q: Do you have to use bolts to mount it to my steel skid that my tank is in or just push the rubber points down through the holes that are already there?
11 months ago1 Answer
- A: Thanks for your question. Bolts should always be used to ensure the pump mounted securely. If you have further questions please reach out to us directly 763-253-4740 or sales@remcoindustries.com11 months agoHelpful?
Q: Will this pump mount to a County Line 15 gallon sprayer?
11 months ago1 Answer
- A: Thanks for you question, yes this pump will mount to that tank, now the plumbing may differ slightly so please reach out to us directly if you have questions regarding set up, 763-253-4740 or sales@remcoindustries.com11 months agoHelpful?
Q: Will this mount to a FIMCO 15 gallon spot sprayer?
2 years ago1 Answer
- A: yes this will plug and play with Fimco Sprayers. Thanks for your question.2 years agoHelpful?
Q: what is the vertical throw rating? ft?
2 years ago1 Answer
- A: Thanks for your question, vertical spray distance is determined by the components in your system like spray gun, nozzle size, hose length, and operational pressure. Recommended operational pressure for this pump is ~40 PSI and that will give you around 20ft of vertical spray. If you have further questions on sizing and set up please reach out to us at sales@remcoindustries.com or 763-253-47402 years agoHelpful?
Q: Is it possible to convert this unit to a 120v house plug? Also are you able to lower the 60 psi shutoff?
2 years ago1 Answer
- A: This unit can not be converted but we do have a 110/120VAC 2.2GPM pump on the tractor supply's website here is the link. https://www.tractorsupply.com/tsc/product/remco-professional-grade-3300-series-22-gpm-60-psi-on-demand-110-120-vac-spray-pump-3-8-fnpt-ports-90-3323-1e1-52c-b Pleas reach out with any further questions 763-253-4740 or sales@remcoindustries.com2 years agoHelpful?
Q: Could I use wood stain through this pump?
3 years ago1 Answer
- A: Chemically this pump will hold up to wood stain, but one concern is when the stain dries it can create a film on the valves and cause priming/performance issues. Be sure to fully flush the pump with clean water after each use to ensure longevity. If you have other questions please reach out to us directly sales@remcoindustries.com or 763-253-4740.3 years agoHelpful?
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 7 of 7 Questions
Newest questions
Q: How long is the warranty for this item
a month ago2 Answers
- A: Remco warrants products to be free from factory defects for a period of 1 year not to exceed 2 years from the manufacturing date.a month agoHelpful?
Q: Do you have to use bolts to mount it to my steel skid that my tank is in or just push the rubber points down through the holes that are already there?
11 months ago1 Answer
- A: Thanks for your question. Bolts should always be used to ensure the pump mounted securely. If you have further questions please reach out to us directly 763-253-4740 or sales@remcoindustries.com11 months agoHelpful?
Q: Will this pump mount to a County Line 15 gallon sprayer?
11 months ago1 Answer
- A: Thanks for you question, yes this pump will mount to that tank, now the plumbing may differ slightly so please reach out to us directly if you have questions regarding set up, 763-253-4740 or sales@remcoindustries.com11 months agoHelpful?
Q: Will this mount to a FIMCO 15 gallon spot sprayer?
2 years ago1 Answer
- A: yes this will plug and play with Fimco Sprayers. Thanks for your question.2 years agoHelpful?
Q: what is the vertical throw rating? ft?
2 years ago1 Answer
- A: Thanks for your question, vertical spray distance is determined by the components in your system like spray gun, nozzle size, hose length, and operational pressure. Recommended operational pressure for this pump is ~40 PSI and that will give you around 20ft of vertical spray. If you have further questions on sizing and set up please reach out to us at sales@remcoindustries.com or 763-253-47402 years agoHelpful?
Q: Is it possible to convert this unit to a 120v house plug? Also are you able to lower the 60 psi shutoff?
2 years ago1 Answer
- A: This unit can not be converted but we do have a 110/120VAC 2.2GPM pump on the tractor supply's website here is the link. https://www.tractorsupply.com/tsc/product/remco-professional-grade-3300-series-22-gpm-60-psi-on-demand-110-120-vac-spray-pump-3-8-fnpt-ports-90-3323-1e1-52c-b Pleas reach out with any further questions 763-253-4740 or sales@remcoindustries.com2 years agoHelpful?
Q: Could I use wood stain through this pump?
3 years ago1 Answer
- A: Chemically this pump will hold up to wood stain, but one concern is when the stain dries it can create a film on the valves and cause priming/performance issues. Be sure to fully flush the pump with clean water after each use to ensure longevity. If you have other questions please reach out to us directly sales@remcoindustries.com or 763-253-4740.3 years agoHelpful?
Similar Items
-
-
Top Rated
-
Top Rated
-
-
-
-
-
-
-
-
-
Items You May Like
-
-
-
Top Rated
-
Top Rated
-
-
-
Top Rated
-
-
-
-
-
Customers Also Bought
-
-
-
Top Rated
-
Top Rated
-
-
-
-
-
-
Top Rated
-
-
Reviews
Summary of Reviews
The product appears to be a reliable and high-performing sprayer pump. Most customers praise its great performance, power, and ease of installation, noting it was a direct replacement that worked seamlessly. Many highlight the pump's durability and ability to withstand harsh conditions. However, a f...
- English
- German
- French
- Spanish
- Portuguese
- Italian
- Korean
- Chinese
- Japanese
- Arabic
Customer Images and Videos
- purchase
- quality
- installation
- price
- returns
- size
- small
- customer service
1 to 4 of 115 Reviews .
1 – 4 of 115 Reviews
Most Recent
Texas
Review 1
5 out of 5 stars.
Replacement pump
a year ago
I never hooked it up I found a new sprayer with pump included for the same price
Yes, I recommend this product.
Response from Zach R.:
a year ago
Zach R.
Thanks for your feedback!
Review 1
1 out of 5 stars.
Junk
a year ago
Purchased this pump 10 months ago with 1 year warranty. Contacted Remco to address my problem with
Pressure switch failure…not included in warranty and have to purchase through Tractor Supply per Remco.
Will never purchase another and do my upmost to inform rural friends about quality, warranty and service.Not trying to get a
Replacement just defective switch…This is why America is tanking…pun intended
Response from Zach R.:
a year ago
Zach R.
Sorry to hear about this, but pressure switches can burn out for a number of different reasons, the most common reason is a symptom called cycling. This is where the pump is pulsating on/off/on/off rapidly during operation. If our technician during the troubleshooting process determined that the pump was cycling during operation which could cause a premature failure, it is not covered under the warranty because that is an operational failure and not a factory defect. Please reach out to us directly with more questions so we can make sure you pump and system is set properly sales@remcoindustries.com or 763-253-4740
Review 1
5 out of 5 stars.
Super pump
a year ago
great unit for the money
SweepstakesYes
Response from Zach R.:
a year ago
Zach R.
Awesome to hear Professional Grade! Thanks for your feedback!
Review 1
4 out of 5 stars.
Pump
a year ago
A very good pump so far. Installation took all of 5 minutes and works great.
SweepstakesYes
Response from Zach R.:
a year ago
Zach R.
Awesome great to hear! Thanks for your feedback!