Mr. Torch Butane Torch
Mr. Torch Butane Torch
Item # 117068199
$27.99
Buy a Welder and Get 15% off Welder accessories.
Get everything you need
Neighbor’s Club Members earn points with purchases.
Mr. Torch Butane Torch
Item # 117068199
Buy a Welder and Get 15% off Welder accessories.
$27.99
New Cardmembers earn a $20 Reward‡ with qualifying purchase of $20 or more plus earn 5% in Rewards+ on this purchase. Valid through 6/28/26.
Out of stock at
Grassland (franklin) TN
Delivery to
Pickup Nearby at ASHLAND CITY TN(23) miles FREE
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Get everything you need
Neighbor’s Club Members earn points with purchases.
The Mr. Torch Butane Torch is an easy-to-use and powerful torch. This butane torch features an electronic push-button ignition for easy startup. It produces a powerful cyclone flame and is butane-refillable. A child-proof lock increases the safety of this torch.
For additional information on this product, please see the Product Documents section for all downloadable user manuals, installation guides, brochures and warranty statements.
- Powerful cyclone flame
- Torch has a temperature max of 1,300 deg. C
- Anti-flaring design
- Butane refillable torch for convenience
- Adjustment flame control
- Equipped with child-proof safety lock and CPSC certificated
| Brand | Mr. Torch |
|---|---|
| Country of Origin | Imported |
| Compatible Metals | SUS |
| Features | GAS BLOW TORCH WITH SAFETY LOCK / FLAME LOCK. ANTI-FLARE |
| Flame Type | PENCIL FLAME |
| Fuel Type | Butane |
| Maximum Temperature | 1,300 deg. C |
| Product Height | 2.76 in. |
| Product Length | 5.94 in. |
| Product Weight | 0.5 lb. |
| Product Width | 4.45 in. |
| Start Type | Push-Button Start |
| Tip Sizes Included | N/A |
| Torch Material | Stainless steel |
| Warranty | 1 YEAR (BE VALID FROM SHIPPING MONTH) |
| Manufacturer Part Number | MHT-921 |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 14 Questions
Newest questions
Q: Is there another way to turn flame down even on its lowest it still very high
4 months ago1 Answer
- A: Hi Neighbor! Adjust the flame length during use by moving flame adjustment Parts Identifications: 5.) Conti Flame Lock Lt slide (2). Sliding toward the “+ * symbol will make the flame longer PR {wi ~~ 5.) Continuous Flame Lock Lever ie ard ) 3 jjustment Slide 6.) Ignitor Button , sliding towards the “- “ symbol will make the flame shorter. For 3.) Safety Lock 7.) Filler Valve (not shown, best results, keep the flame length at about 1/2" ~ 1" (10~25mm). 4.) Air Control Lever under torch) Don't make the flame too long as it will only waste fuel and make the flame unstable. ® Adjust the flame width during use by pushing the air control lever (4) with fingers. Itis advised to operate and light with air control knob as for back as possible. ® At higher altitudes, torch may not operate on maximum flame length setting (with slide pushed all the way to “ +”). For best results, adjust the slide to the mid-range between “ +" and “- “. Note: If the Ignitor Button is not fully pressed in the safety lock will immediately click up and you will not be able to press the ignitor button or light the blowtorch. If this occurs start the igniting procedure again4 months agoHelpful?
Q: Is there butane init ? I bought one and would not ignite
a year ago1 Answer
- A: Hi Neighbor! You will need to fill this with butane.a year agoHelpful?
Q: My torch isn’t igniting, although the gas is flowing
a year ago1 Answer
- A: Hi Neighbor! We have a 30 day return policy for this item.a year agoHelpful?
Q: What is the spring part for?
a year ago1 Answer
- A: Hi Neighbor! There is no spring on this item.a year agoHelpful?
Q: Photo shows it sitting on a flat surface with flame on. Will it actually do this?
3 years ago1 Answer
- A: This product comes with a continuous flame feature. More information on this feature and how it works can be found in the owners manual located on this product page.3 years agoHelpful?
Q: Where do you get a butane lighter refill
4 years ago1 Answer
- A: That option is not available.4 years agoHelpful?
Q: I have the lighter on the lowest setting yet the flame is shooting out too far. Has anyone else experienced this? Should I exchange it?
4 years ago1 Answer
- A: For additional product support, please contact the manufacture.4 years agoHelpful?
Q: Does it come with the butane mini tan?
4 years ago1 Answer
- A: No, it is not included.4 years agoHelpful?
Q: Followed filling and operation instructions to the letter and used quality butane. Torch will not ignite. Can you troubleshoot?
5 years ago1 Answer
- A: Try lighting with butane turned really low. Also, after filling, allow butane time to settle down to ambient temperature. When filling it gets really cold and will not light. If none of this works, be sure you are getting spark by looking in the end as you strike. Don’t hold it close to your face when doing this because Murphy’s law says that it will light and burn your eyelashes off!5 years agoHelpful?
Q: How far can the flame project from the cylinder? For example : 3inches, 5 inches? Please advise.
5 years ago2 Answers
- A: I've seen it project 3 to 4 inches5 years agoHelpful?
1 - 10 of 14 Questions
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 14 Questions
Newest questions
Q: Is there another way to turn flame down even on its lowest it still very high
4 months ago1 Answer
- A: Hi Neighbor! Adjust the flame length during use by moving flame adjustment Parts Identifications: 5.) Conti Flame Lock Lt slide (2). Sliding toward the “+ * symbol will make the flame longer PR {wi ~~ 5.) Continuous Flame Lock Lever ie ard ) 3 jjustment Slide 6.) Ignitor Button , sliding towards the “- “ symbol will make the flame shorter. For 3.) Safety Lock 7.) Filler Valve (not shown, best results, keep the flame length at about 1/2" ~ 1" (10~25mm). 4.) Air Control Lever under torch) Don't make the flame too long as it will only waste fuel and make the flame unstable. ® Adjust the flame width during use by pushing the air control lever (4) with fingers. Itis advised to operate and light with air control knob as for back as possible. ® At higher altitudes, torch may not operate on maximum flame length setting (with slide pushed all the way to “ +”). For best results, adjust the slide to the mid-range between “ +" and “- “. Note: If the Ignitor Button is not fully pressed in the safety lock will immediately click up and you will not be able to press the ignitor button or light the blowtorch. If this occurs start the igniting procedure again4 months agoHelpful?
Q: Is there butane init ? I bought one and would not ignite
a year ago1 Answer
- A: Hi Neighbor! You will need to fill this with butane.a year agoHelpful?
Q: My torch isn’t igniting, although the gas is flowing
a year ago1 Answer
- A: Hi Neighbor! We have a 30 day return policy for this item.a year agoHelpful?
Q: What is the spring part for?
a year ago1 Answer
- A: Hi Neighbor! There is no spring on this item.a year agoHelpful?
Q: Photo shows it sitting on a flat surface with flame on. Will it actually do this?
3 years ago1 Answer
- A: This product comes with a continuous flame feature. More information on this feature and how it works can be found in the owners manual located on this product page.3 years agoHelpful?
Q: Where do you get a butane lighter refill
4 years ago1 Answer
- A: That option is not available.4 years agoHelpful?
Q: I have the lighter on the lowest setting yet the flame is shooting out too far. Has anyone else experienced this? Should I exchange it?
4 years ago1 Answer
- A: For additional product support, please contact the manufacture.4 years agoHelpful?
Q: Does it come with the butane mini tan?
4 years ago1 Answer
- A: No, it is not included.4 years agoHelpful?
Q: Followed filling and operation instructions to the letter and used quality butane. Torch will not ignite. Can you troubleshoot?
5 years ago1 Answer
- A: Try lighting with butane turned really low. Also, after filling, allow butane time to settle down to ambient temperature. When filling it gets really cold and will not light. If none of this works, be sure you are getting spark by looking in the end as you strike. Don’t hold it close to your face when doing this because Murphy’s law says that it will light and burn your eyelashes off!5 years agoHelpful?
Q: How far can the flame project from the cylinder? For example : 3inches, 5 inches? Please advise.
5 years ago2 Answers
- A: I've seen it project 3 to 4 inches5 years agoHelpful?
1 - 10 of 14 Questions
Similar Items
-
-
-
-
-
Top Rated
-
-
-
-
-
-
-
Items You May Like
-
-
-
-
Top Rated
-
-
Top Rated
-
Top Rated
-
-
-
-
-
Top Rated
Customers Also Bought
-
-
-
-
-
-
-
Top Rated
-
-
-
-
-
Reviews
- purchase
- satisfaction
- ease of use
- disappointing
- instructions
- price
- small
- product features
1 to 4 of 48 Reviews .
1 – 4 of 48 Reviews
Most Recent
Review 1
5 out of 5 stars.
Great torch
a month ago
This little torch is awesome. The negative reviews are from people that either have no common sense. Or can not follow directions.
Review 1
1 out of 5 stars.
Poor packaging info
11 months ago
It should specify that there is no fuel in it on the packaging. We made an additional trip just for the butane.
No, I do not recommend this product.
Warren ohio
Reviews 13
4 out of 5 stars.
Mr.torch butane torch
a year ago
It works really well
SweepstakesYes
Yes, I recommend this product.
Milton Florida
Review 1
1 out of 5 stars.
Boo
a year ago
Will not light..worked first time but will not light again.. I checked gas outlet for clog and the spark is working fine.. I even tried to light it with a lighter but nothing..
No, I do not recommend this product.