Skip to Main Content
X

Please enable your microphone.

X

We Are Listening...

Say something like...

"Show me 4health dog food..."

You will be taken automatically
to your search results.

X

Your speech was not recognized

Click the microphone in the search bar to try again, or start typing your search term.

X

We are searching now

Your search results
will display momentarily...

MESSAGE

JobSmart Portable Abrasive Blaster

SKU # 399969899
Product price

Save Up To
See price at checkout Why?
Product Rating is 3.0
3.0
(38)

Financing Available! Click here for more details...

Quantity

Autoship

Pickup In Store

Delivery Options

Protect Your Purchase

We'll fix it, replace it, or reimburse you for it. Learn More

power plus

Item Information

Remove oxidation, paint and rust with the JobSmart Portable Abrasive Blaster. This steel sandblaster allows for a diverse amount of surfaces to be cleaned during a single blast time. Designed for contractors and serious do-it-yourselfers, this steel sandblaster is an easy way for you to clean a variety of different surfaces including metal, wood, brick or concrete. Features a spring-loaded design with auto-closing nozzle and 20 gal. tank with shut-off valve. Includes 8 ft. hose, blasting hood, tape and funnel.

  • Minimum operating PSI: 60
  • Maximum operating PSI: 125
  • Tank Size: 20 gal.
  • Hose Length: 8 ft.
  • 90 day limited warranty

Specification Description
Brand: JobSmart
Abrasive Capacity: 50 lb.
Body Finish: Powder Coat
Maximum Air Consumption: 25 CFM
Maximum Operating PSI: 125 PSI
Minimum Air Consumption: 6 CFM
Minimum Operating PSI: 60 PSI
Product Height: 16-1/2 in.
Product Length: 34-1/2 in.
Product Type: Sand Blasters
Product Weight: 55 lb.
Product Width: 17-3/10 in.
Tank Size: 20 gal.
Warranty: 90-Day Limited Warranty
Manufacturer Part Number JSSB20G
JobSmart Portable Abrasive Blaster is rated 3.0 out of 5 by 38.
Rated 5 out of 5 by from Great peice of equipment I use regulator sand in my Blaster it works great. You have to keep the blaster with a good deal of sand in it. I sift my sand through a sifter like you can buy in any store. To much pressure could be a problem, know more than 55 psi.
Date published: 2018-09-22
Rated 4 out of 5 by from Does the job Bought it to remove rust from an old smoker. I initially purchased the black label black diamond coarse abrasive that was available in the store. This blaster will not run it. It clogs instantly. I went back and purchased the red label black diamond abrasive and it works like a champ. The stuff goes everywhere though so I recommend using the supplied hood and also purchasing an OSHA approved respirator. The supplied blasting nozel/gun works OK but it's not a great design. I recommend also getting a better one. It works but it has some drawbacks like the abrasive will take a chunk out of the sealing surface after about an hour and it also deflects the abrasive in another direction unless you're using it at wide open. It the blaster also generally doesn't operate below 40 psi. So make sure you have a good compressor to run it.
Date published: 2018-06-03
Rated 4 out of 5 by from Basic Pot Blaster, Used a LOT for years - OKAY!!! I bought this maybe 5 years ago initially to blast a wood sign that was masked to create a relief effect background. At the time I had a 10 gal single stage compressor from a frightening harbor and it did get me through the job. lots of stopping and starting, waiting for the compressor, AND waiting for air to make its way into the pot blaster. Definitely need to use the fine media. I screen mine through a few layers of aluminum window screen. usually trust it out of the bag, but i reuse it as much as possible. just set up a kiddie pool and a tarp and it collects probably 80% of the stuff depending on how lazy i am. I use a 50' 3/8" hose with 3/8" fittings so the compressor to pot flows alot quicker. i forget if it even came with a regulator, if it did, i took it off . After a few years of using it off and on, the valves started leaking, so I would get constant leak through the nozzle, and the media valve would leak so it would build up and get a little clogged. I've used it enough to wear out the nozzle and the valve sealing stopper on the deadman. Just this year i replaced the hose valve and the media valve. and it works mint again, maybe even better than new. I play catch up with my compressor, so once everything is up to pressure, I just crack the hose flow and work the media valve open until its a good balance. I can use the deadman and it blasts consistently with no clogging. only when air pressure drops i have to re-balance the flows. no issues with either of the hoses. spray hose looks like its going to fall apart but it hasnt yet. and this thing has lived outside its while life, sometimes under a tarp. mag wheels, moto frames, frosting glass, wood signs. works great. I'm happy to have it at my disposal as a handy man and a hobbyist.
Date published: 2017-11-13
Rated 4 out of 5 by from Small but HD consumer grade blaster Assembly was easy, set up was well explained in the supplied lit. I was derailed initially by wet Black Beauty med grit. My first bag was way too wet and clogged instantly. After clearing the tank and refilling with dry material, the blaster worked great for my running board refinishing. Medium grit cut the bonded rubber leftovers, rust and paint. It's a heavy duty home unit, well built and easy to use.
Date published: 2017-09-12
  • y_2018, m_9, d_23, h_14
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_37
  • loc_en_US, sid_399969899, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_tractorsupply
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 8ms
  • REVIEWS, PRODUCT

Does this require Air Comp ???

Asked by: Robford
Yes, the use of this tool requires an air compressor. The air consumption must be between 6-25 CFM.
Answered by: Astroer
Date published: 2016-10-07

I have this model and itkeeps plugging cant regulate the sand no instruction manul with it

Asked by: Jerry170
Please check your email for the assembly and operating instructions.
Answered by: ErlindaC
Date published: 2018-04-16

Does this hold pressure in the unit itsself

Asked by: John bagley
This 20 gallon abrasive blaster holds 60 - 125 PSI working pressure.
Answered by: KirwinH
Date published: 2017-09-13

Where is this made?

Asked by: Lnbasa
The item's country of origin is China.
Answered by: ErlindaC
Date published: 2018-06-14

Is there an instruction manual for this.  I have this model but cannot figure how to regulate the sand 

Asked by: Gsmall
Please check your email for additional information.
Answered by: ErlindaC
Date published: 2018-03-29

Can I use baking soda (soda ash) as the abrasive?

Asked by: TLnTX
Please use a media that is 80 grit or smaller (that means the number on the bag must be 80 or larger for a smaller media).
Answered by: ErlindaC
Date published: 2018-08-22

Need operation manual 

Asked by: Charlie Stockton
Please check your email for the manual.
Answered by: ErlindaC
Date published: 2018-05-11

Need operation manual 

Asked by: Terry101
Please check your email for the operation manual.
Answered by: ErlindaC
Date published: 2018-08-28
  • y_2018, m_9, d_23, h_14CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_US, sid_399969899, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING)]
  • clientName_tractorsupply
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 5ms
  • QUESTIONS, PRODUCT
Attachments (  1 - 1 of 1  )