Hornet Outdoors Medium Universal UTV Aluminum Diamond Plate Tool Box for Most UTVs, Black

A: Hi Neighbor- Step-by-Step Mounting Guide 1. Choose Your Mounting Location Position the box either on the floor of your cargo bed, along the side rails, or directly flush against the rear of your cab. Ensure that the lid can fully open without hitting your cab or safety roll bars. 2. Align Your Anchor System (Tool-Less Method)If your UTV (like Polaris Rangers or Generals) utilizes pre-installed bed holes, use Hornet Outdoors Twist-Lock Anchors (often included or available separately). Attach mounting brackets (like Hornet L-brackets) to the pre-drilled holes on the bottom or sides of your tool box using standard bolts, washers, and nuts. Drop the anchors into the designated Lock-and-Ride or drop-in bed holes. Turn the anchors clockwise until they firmly expand and lock the brackets tightly against the bed. 3. Direct Drilling (Universal Method)If your UTV lacks proprietary anchor points (like many Kawasaki, Can-Am, or Yamaha models): Position the toolbox where you want it. Mark the 4 corner points on the bed floor where you plan to drill. Carefully drill holes matching your bracket size into the bed (taking care not to drill into the chassis or moving parts underneath). Bolt the toolbox base directly to the bed floor using heavy-duty bolts, oversized washers (to prevent the bolt from pulling through the plastic bed), and lock-nuts. 4. Adjust and Secure Once installed, open the lid and double-check all internal hardware. Ensure the box does not shift when you push against it. Required Tools A socket/wrench set for tightening bolts.A drill and drill bits (if you need to mount to a flat, non-lock-and-ride bed floor).Hornet Twist-Lock Anchors (if applicable to your vehicle brand).

A: The lock secures the clasp.