AgKNX Category 1 Quick Hitch Bushings with Roll Pins, 4-Pack
AgKNX Category 1 Quick Hitch Bushings with Roll Pins, 4-Pack
Item # 208614299
$59.99
Add this item to unlock free delivery!
Get everything you need
Neighbor’s Club Members earn points with purchases.
$59.99
New Cardmembers earn a $20 Reward‡ with qualifying purchase of $20 or more plus earn 5% in Rewards+ on this purchase. Valid through 8/9/26.
Add this item to unlock free delivery!
This item is available online only
Delivery to
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Get everything you need
Neighbor’s Club Members earn points with purchases.
Grab a set of the AgKNX CAT 1 Quick Hitch Bushings with Roll Pins. It comes with 4 bushings and 4 pins for ball socket reduction.
- Kit includes 4 bushings and 4 pins
- Hitch category reduction: 1
- Ball socket reduction
- Bright color for visibility
| Brand | AgKNX |
|---|---|
| Country of Origin | Imported |
| Compatibility | 3 point quick hitch |
| Package Quantity | 1 |
| Primary Color | Yellow |
| Primary Material | Steel |
| Product Height | 6 in. |
| Product Length | 6 in. |
| Product Weight | 7 lb. |
| Product Width | 6 in. |
| Manufacturer Part Number | 25-045 |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 5 of 5 Questions
Newest questions
Q: The roll pins are just barely too large to fit in the holes. Is this how it's supposed to be?
4 months ago2 Answers
- A: Yes. They are to be hammered in. Cheers4 months agoHelpful?
Q: What size are the roll pins. One of mine broke and I can't find the size in your store.
2 years ago1 Answer
- A: Hello, Thank you for your question. Per the vendor, "The roll pin for the quick hitch bushings are 7/16" x 1-3/8" long." We do not currently carry these at Tractor Supply Co. You can purchase them directly from the manufacturer by following the link below. https://www.mcmaster.com/98296A801/2 years agoHelpful?
Q: My implements are cat 1 but my quick hitch is cat 2. Is this the part I need? If not can you supply the correct part number?
2 years ago1 Answer
- A: No these are not Cat 1 to Cat 2 adapters. We don't carry anything like that but I believe there are adapters out there.2 years agoHelpful?
Q: what are the bushings for and which holes do they go in
2 years ago1 Answer
- A: Hi Tommy, the bushings are used to connect the quick hitch to the implement your are attaching. The bushings would go on the lift arm pins of the implement. Each implement needs one attached. Why wouldn't the lower hooks be the same size as the lift arm pins? This is just what the ASAE standard is. As far as which hole to put it in is up to you are your attachment. I recommend you sliding the bushing on your pins and not attaching the roll pins yet. Attach the quick hitch and see where you need the bushings to make it work properly. Hope that helps. Thanks2 years agoHelpful?
Q: What is the actual length of each bushing?
2 years ago1 Answer
- A: The total length is 4". The collar length is 1-1/8". Hope that helps. Thanks2 years agoHelpful?
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 5 of 5 Questions
Newest questions
Q: The roll pins are just barely too large to fit in the holes. Is this how it's supposed to be?
4 months ago2 Answers
- A: Yes. They are to be hammered in. Cheers4 months agoHelpful?
Q: What size are the roll pins. One of mine broke and I can't find the size in your store.
2 years ago1 Answer
- A: Hello, Thank you for your question. Per the vendor, "The roll pin for the quick hitch bushings are 7/16" x 1-3/8" long." We do not currently carry these at Tractor Supply Co. You can purchase them directly from the manufacturer by following the link below. https://www.mcmaster.com/98296A801/2 years agoHelpful?
Q: My implements are cat 1 but my quick hitch is cat 2. Is this the part I need? If not can you supply the correct part number?
2 years ago1 Answer
- A: No these are not Cat 1 to Cat 2 adapters. We don't carry anything like that but I believe there are adapters out there.2 years agoHelpful?
Q: what are the bushings for and which holes do they go in
2 years ago1 Answer
- A: Hi Tommy, the bushings are used to connect the quick hitch to the implement your are attaching. The bushings would go on the lift arm pins of the implement. Each implement needs one attached. Why wouldn't the lower hooks be the same size as the lift arm pins? This is just what the ASAE standard is. As far as which hole to put it in is up to you are your attachment. I recommend you sliding the bushing on your pins and not attaching the roll pins yet. Attach the quick hitch and see where you need the bushings to make it work properly. Hope that helps. Thanks2 years agoHelpful?
Q: What is the actual length of each bushing?
2 years ago1 Answer
- A: The total length is 4". The collar length is 1-1/8". Hope that helps. Thanks2 years agoHelpful?
Similar Items
-
-
-
-
Top Rated
-
-
-
-
-
-
-
Top Rated
-
Reviews
- English
- German
- French
- Spanish
- Portuguese
- Italian
- Korean
- Chinese
- Japanese
- Arabic
1 to 4 of 45 Reviews .
1 – 4 of 45 Reviews
Most Recent
Reviews 2
5 out of 5 stars.
quink hitch
3 months ago
handy for quick chang
SweepstakesYes
Yes, I recommend this product.
Anonymous
Review 1
5 out of 5 stars.
Great product
7 months ago
Perfect fit works as described.
SweepstakesYes
Review 1
1 out of 5 stars.
HORRIBLE CUSTOMER SERVICE !!!
11 months ago
I DON'T KNOW , TSC LOST MY ORDER AND I HAVE JUMPED THROUGH MANY HOOPS TRYING TO GET THEM... OR... GET MY MONEY BACK !!!!!!!!!
SweepstakesYes
Response from ToolTuff Direct Team:
11 months ago
ToolTuff Direct Team
Please give our customer service a call (720) 437-7640, we want to take care of you.
Maine
Review 1
4 out of 5 stars.
Not perfect
a year ago
Had to hog out the holes on one of the bushings to get the pin to go in.
SweepstakesYes
Yes, I recommend this product.