Abocrete bonds, levels, fills, rebuilds, and resurfaces concrete and most rigid surfaces. This versatile epoxy can be blended with fine sand, creating a structural filler used for countless applications. Repair floors, docks, sidewalks, driveways, stairs, parking decks, and more. Abocrete is perfect for fixing pitted, spalled, worn, or cracked concrete and is ideal for salt damage repairs. It makes a great slip-resistant floor and deck coating by broadcasting sand over the wet Abocrete. Abocrete works great for anchoring posts and railings and installing machinery, precasts, columns, and more. Use with forms to rebuild steps and vertical columns.
Abocrete creates repairs that are permanent and cost-effective. It is easy to mix and apply. Blend in sand to create a cement-like epoxy compound that self-levels and has 0 shrinkage. Extend and thicken the compound by adding additional sand or aggregate. Abocrete can be applied in any thickness for a finish that is stronger than concrete! It is unaffected by salt water, oils, and chemicals that erode concrete. It holds up well to heavy forklift and truck traffic. Mix 4 parts A to 1 part B. Add sand to reach desired thickness. 1 gallon of Abocrete, without sand or aggregate, covers 80 sq. ft., 20 mils thick. One Abocrete kit with sand covers approximately 28 sq. ft., 1/8 in. thick. Apply with a brush, paint roller, or squeegee. Pot life: 20-30 minutes. Includes: 1.25 Quarts of Epoxy and 1 Gallon of Sand