Black Diamond 50 lb. Blasting Abrasives, Fine
$17.99
Black Diamond 50 lb. Blasting Abrasives, Fine
Black Diamond 50 lb. Blasting Abrasives, Fine
Item # 390779899
Get everything you need
Neighbor’s Club Members earn points with purchases.
Shopping at
Grassland (franklin) TN
Delivery to
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Get everything you need
Neighbor’s Club Members earn points with purchases.
Black Diamond Fine Abrasives * All-purpose abrasive provides minimal surface profile * Safe and cost effective (contains less than 0.1% crystalline silica) * Ideal for lighter coatings and rust removal
For additional information on this product, please see the Product Documents section for all downloadable user manuals, installation guides, brochures and warranty statements.
| Brand | Black Diamond |
|---|---|
| Country of Origin | Made in USA |
| Features | Does not absorb water |
| Graded | Fine |
| Media Grit | 60 |
| Media Type | Coal Slag |
| Metal Removal Level | Medium |
| Package Size | 50 lb. |
| Product Height | 4.5 in. |
| Product Length | 18 in. |
| Product Weight | 50 lb. |
| Product Width | 15 in. |
| Manufacturer Part Number | FTSFB5 |
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 150 Questions
Newest questions
Q: Does this work well for etching glass? I usually use aluminum oxide 120 grit but the place I got it no longer carries it looking for a replacement. I etch borosilicate glass and need to be able to have fine detail.
a month ago1 Answer
- A: This is not an application that we are familiar with enough to make a confident recommendation. Our fine blend product sold at TSC stores could work but it will be a little more coarse than the 120 grit you were using. Please email info@us-minerals.com for any additional information.a month agoHelpful?
Q: What is the media made of?
2 months ago1 Answer
- A: The media is made of boiler slag, which is a by-product of coal fired power plants. Please visit www.blackdiamondabrasives.com for more information.2 months agoHelpful?
Q: what size blasting nozzle is need for the fine blasting abrasive
2 months ago1 Answer
- A: The Fine Blend product requires a minimum nozzle size of 1/8”.2 months agoHelpful?
Q: Should you wear a mask when using this in sandblaster
3 months ago1 Answer
- A: Yes, you should always wear a respirator when using Black Diamond Fine Blasting Abrasives. The fine particles created during sandblasting are hazardous to your lungs and can cause serious respiratory issues, including pulmonary fibrosis or silicosis.3 months agoHelpful?
Q: Can I use it in glass bead machine
3 months ago1 Answer
- A: We are unable to make a recommendation without more information on the machine itself. Please email us at info@us-minerals.com with the brand and type of machine and we will see if we can help.3 months agoHelpful?
Q: What media would you use to remove calcium deposits from pool line?
4 months ago1 Answer
- A: It is difficult to make a recommendation without knowing what type of pool liner this is. Can you please contact us directly via email at info@us-minerals.com and we can get some additional information from you.4 months agoHelpful?
Q: Would this product be good for removing paint from a plastic bumper? If not, can you recommend one
8 months ago1 Answer
- A: No, Black Diamond blasting abrasive is not suitable for removing paint from a plastic bumper. It is made from coal slag and is far too aggressive and hard for use on plastics. It would likely melt, warp, or severely damage the bumper's surface, leaving a rough and unusable texture. For removing paint from a plastic bumper, a softer, less aggressive blasting medium is required. The best option available at Tractor Supply Co. is the Agra-Grit 50 lb. Walnut Shell Blasting Grit, Fine. Walnut shells are a natural, non-toxic, and biodegradable media that is hard enough to strip paint but gentle enough to not damage the underlying plastic surface.8 months agoHelpful?
Q: Can this be used with a small handheld blaster?
8 months ago1 Answer
- A: It is difficult to answer without more information about the handheld blaster but if there is is at least a 1/8" nozzle then it is possible. You can email info@us-minerals.com for more information.8 months agoHelpful?
Q: How small of a tip can be used on sand blaster with out clogging
9 months ago1 Answer
- A: We recommend a minimum 1/8" nozzle for the fine blend product.9 months agoHelpful?
Q: Approximately how many pounds of sand would be needed to remove paint from a pickup cab?
9 months ago1 Answer
- A: There are a lot of variables that can impact abrasive consumption on a given project. We generally use 7 lbs per square foot as rule of thumb to start.9 months agoHelpful?
1 - 10 of 150 Questions
Q&As
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 150 Questions
Newest questions
Q: Does this work well for etching glass? I usually use aluminum oxide 120 grit but the place I got it no longer carries it looking for a replacement. I etch borosilicate glass and need to be able to have fine detail.
a month ago1 Answer
- A: This is not an application that we are familiar with enough to make a confident recommendation. Our fine blend product sold at TSC stores could work but it will be a little more coarse than the 120 grit you were using. Please email info@us-minerals.com for any additional information.a month agoHelpful?
Q: What is the media made of?
2 months ago1 Answer
- A: The media is made of boiler slag, which is a by-product of coal fired power plants. Please visit www.blackdiamondabrasives.com for more information.2 months agoHelpful?
Q: what size blasting nozzle is need for the fine blasting abrasive
2 months ago1 Answer
- A: The Fine Blend product requires a minimum nozzle size of 1/8”.2 months agoHelpful?
Q: Should you wear a mask when using this in sandblaster
3 months ago1 Answer
- A: Yes, you should always wear a respirator when using Black Diamond Fine Blasting Abrasives. The fine particles created during sandblasting are hazardous to your lungs and can cause serious respiratory issues, including pulmonary fibrosis or silicosis.3 months agoHelpful?
Q: Can I use it in glass bead machine
3 months ago1 Answer
- A: We are unable to make a recommendation without more information on the machine itself. Please email us at info@us-minerals.com with the brand and type of machine and we will see if we can help.3 months agoHelpful?
Q: What media would you use to remove calcium deposits from pool line?
4 months ago1 Answer
- A: It is difficult to make a recommendation without knowing what type of pool liner this is. Can you please contact us directly via email at info@us-minerals.com and we can get some additional information from you.4 months agoHelpful?
Q: Would this product be good for removing paint from a plastic bumper? If not, can you recommend one
8 months ago1 Answer
- A: No, Black Diamond blasting abrasive is not suitable for removing paint from a plastic bumper. It is made from coal slag and is far too aggressive and hard for use on plastics. It would likely melt, warp, or severely damage the bumper's surface, leaving a rough and unusable texture. For removing paint from a plastic bumper, a softer, less aggressive blasting medium is required. The best option available at Tractor Supply Co. is the Agra-Grit 50 lb. Walnut Shell Blasting Grit, Fine. Walnut shells are a natural, non-toxic, and biodegradable media that is hard enough to strip paint but gentle enough to not damage the underlying plastic surface.8 months agoHelpful?
Q: Can this be used with a small handheld blaster?
8 months ago1 Answer
- A: It is difficult to answer without more information about the handheld blaster but if there is is at least a 1/8" nozzle then it is possible. You can email info@us-minerals.com for more information.8 months agoHelpful?
Q: How small of a tip can be used on sand blaster with out clogging
9 months ago1 Answer
- A: We recommend a minimum 1/8" nozzle for the fine blend product.9 months agoHelpful?
Q: Approximately how many pounds of sand would be needed to remove paint from a pickup cab?
9 months ago1 Answer
- A: There are a lot of variables that can impact abrasive consumption on a given project. We generally use 7 lbs per square foot as rule of thumb to start.9 months agoHelpful?
1 - 10 of 150 Questions
Similar Items
-
-
-
-
-
Top Rated
-
-
-
Top Rated
-
-
-
Top Rated
-
Items You May Like
-
-
-
-
-
-
Top Rated
-
Top Rated
-
-
-
-
-
Top Rated
Customers Also Bought
-
-
-
-
-
-
Top Rated
-
-
Top Rated
-
-
-
-
Top Rated
Reviews
Summary of Reviews
The product is effective at removing paint, rust, and debris from various surfaces like metal and brick. The fine/medium grit size is well-suited for most uses, though some found the coarser particles...
Most Helpful Favorable Review
5 out of 5 stars.
Question can i use to remove old paint on a truck
5 years ago
Can i use this to sandblast paint off a truck without harming the metal
52 people found this helpful
Show Reviews:
Most Helpful Critical Review
1 out of 5 stars.
Not good but works good if you prepare it.
5 years ago
My tractor supply throws all the blast media in all the spaces for fine medium and coarse
There is no labels on the bag so you dont know what grade you are getting.
Using it strait from the bag wont work unless you have a serious heavy duty sandblaster.
There are to many big pieces that will clog the average gun let alone the crap guns they sell there. You will have to take a window screen and filter out all the big stuff and you will be left with perfect size pieces for your gun but half the amount, it will work that way and if it doesnt you have a poor setup. Would I buy it again, HELL NO.
Buy some quality media thats filtered perfect for you gun and pressure, glass beads will flow a lot smoother put more stuff on the part and be quicker. Tractor supply needs to get this crap off the floor along with there crap blast cabinets and guns!
19 people found this helpful
Show Reviews:
Customer Images and Videos
- price
- purchase
- sanding
- corrosion
- metal
- quality
- satisfaction
- value
1 to 4 of 308 Reviews .
1 – 4 of 308 Reviews
Most Recent
Review 1
1 out of 5 stars.
….
a month ago
I ordered this at the Port Orchard store. Got to the store didn’t have. Check the Silverdale store they said they had it, I ordered it for pick up. Got there they again didn’t have. I needed to get the job at home done, so I took the substitute grit. Had a horrible time using it. Got the job done. Dumped the remaining grit. Find a new supplier that will have the correct grit when I show up for it. 2 stores terrible service.
Review 1
5 out of 5 stars.
a month ago
Inexpensive usable product, great quality
Review 1
2 out of 5 stars.
Not Fine
2 months ago
Product would not run through tip of sand blaster. Continued to clog tip. I used 2 bags that work ok then got some that had larger pieces and was useless.
Review 1
1 out of 5 stars.
Mislabeled
2 months ago
I have used this product for years. I bought 4 bags and when I went to use it, I found that it was a medium grit not fine grit. Usually the words fine grit are right on the packaging. This time it was not. We bought online and picked up at the store. The manager remembered me seeking this product another time and said usually it has fine grit displayed on the packaging. She was very kind and refunded my purchase even though one bag was open.