Skip to main content

Sign In / Enroll

Get rewarded!


Sign In / Enroll

Get rewarded!

A woman outside with a dog
A woman outside with a dog

Prime-Line Mortise Closet Door Pull, 5/16 in. Depth x 2-1/8 in. Outside Diameter, Steel, Satin Nickel Finish, 2 pk., N 7209

Shop all Prime-Line
Prime-Line Mortise Closet Door Pull, 5/16 in. Depth x 2-1/8 in. Outside Diameter, Steel, Satin Nickel Finish, 2 pk., N 7209

Item # 2099889

Prime-Line Prime-Line Mortise Closet Door Pull, 5/16 in. Depth x 2-1/8 in. Outside Diameter, Steel, Satin Nickel Finish, 2 pk., N 7209
Prime-Line Prime-Line Mortise Closet Door Pull, 5/16 in. Depth x 2-1/8 in. Outside Diameter, Steel, Satin Nickel Finish, 2 pk., N 7209
$7.99
Prime-Line Mortise Closet Door Pull, 5/16 in. Depth x 2-1/8 in. Outside Diameter, Steel, Satin Nickel Finish, 2 pk., N 7209

Item # 2099889

Prime-Line Prime-Line Mortise Closet Door Pull, 5/16 in. Depth x 2-1/8 in. Outside Diameter, Steel, Satin Nickel Finish, 2 pk., N 7209
Prime-Line Prime-Line Mortise Closet Door Pull, 5/16 in. Depth x 2-1/8 in. Outside Diameter, Steel, Satin Nickel Finish, 2 pk., N 7209
$7.99

This mortise cup closet door pull is constructed of stamped steel and comes finished in satin nickel. The outside diameter of this pull is 2-1/8 inch and it has a depth of 5/16 inch. These mortise cups set flush in the door and are used on by-passing closet panel doors to provide a pull for ease of opening and closing, and it they are used by many manufacturers. This item includes 2 pulls and 4 nails per package. Installation tip: to avoid damaging the pulls during installation; use a pair of needle nose pliers to hold the nails while hammering, then finish driving the nails with a nail set to seat them in place. Silicone glue may be required if the hole has worn larger.

  • REPLACE CLOSET DOOR PULL Easily replace a damaged or missing closet door pull with Prime-Lines round finger pull. The pull is constructed of stamped steel with a satin nickel-plated finish.
  • INCLUDES Each package includes two sliding door pulls and four nails. Each pull is held in place by two nails.
  • UNIVERSAL DESIGN Used by many closet door manufacturers on bi-pass door systems, the finger pull will match the existing hardware on closets throughout your home.
  • INSTALLATION Installation is quick and easy with all hardware included. The door pulls fit a 2-1/8 inch mortise in the closet door. The pull is held in place by two small nails. When flush mounted, it is 2-1/8 inch in diameter.
  • FOR BYPASS WARDROBE DOORS The stamped steel closet pull is compatible with bi-pass wardrobe doors 3/4 inch to 1-3/4 inch thick
  • NOTE Please refer to the line art drawing for dimensions and compare with your original item before purchasing (Not Universal)