The Mist under-sink filtration system is an effective, affordable and DIY way to filter the water that comes from your tap. The average American household uses 27 gal. of tap water a day (according to watercalculator.org). Filtering 27 gal. of water daily can be costly if the incorrect mechanism is utilized. The Mist under-sink filtration system will effectively filter up to 20,000 gal. of water, providing about two years of clean tap water at less than 10 cents a day, making our under-sink filtration system the most cost-effective way to filter water. Installation is quick and easy; once the initial installation is completed, the filter can be replaced with a new one when necessary. Because the filter has such a long life, there is no need to discard the plastic cartridge often, thereby eliminating as much waste as possible from the environment. Installation is uncomplicated and requires two basic tools: a drill and a wrench. The product comes including all adapters and accessories necessary to connect the system to any standard sink system. Simply drill two holes in the desired location to mount the filter. Then turn off the water inlet valve, disconnect the existing faucet hose and attach the filtration system's hoses. Once installed the system is hidden from view under the sink, without any unsightly wires, cartridges, or accessories. Measuring at about 1 ft. long and 3.5 in. deep, be assured that your under-sink space can still be utilized for other needs.

• The Mist Under-sink filter system is an effective, eco-friendly, affordable and DIY way to filter the water that comes from your tap. When used with municipal water, the system has a service life of 20,0000 gal. or 2 years.
• Tested and certified against NSF/ANSI 42 by IAPMO R&T. Filters out 99.9% of chlorine, removes odors and significantly improves taste.
• Compatible with most standard sinks and plumbing systems. Includes one 1/2 FIP to 3/8 compression adapter and one 3/8 compression to 1/2 FIP adapter. (Full packaging contents can be found below) Installation process is uncomplicated and can be completed quickly by anyone with two basic tools - a drill and a wrench. Once installed, the filter can be easily switched out when it has reached its capacity.
• With a micron rating as small as 0.5 UM you can be confident that your water will be adequately filtered