MasterCool MasterStat Digital Evaporative Cooler Thermostat
MasterCool MasterStat Digital Evaporative Cooler Thermostat
Item # 109268999
$119.99
Neighbor’s Club Members earn points with purchases.
$119.99
New Cardmembers earn a $20 Reward‡ with qualifying purchase of $20 or more plus earn 5% in Rewards+ on this purchase. Valid through 6/28/26.
This item is available online only
Delivery to
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Neighbor’s Club Members earn points with purchases.
The MasterStat digital thermostat is designed to operate a 2-speed fan motor, a small water pump motor, and an optional water purge pump. It has a easy to read backlit LCD display. It also features a pre-wet mode to ensure your pads are full saturated prior to the pump being activated.
For additional information on this product, please see the Product Documents section for all downloadable user manuals, installation guides, brochures and warranty statements.
- Designed to control any ducted evaporative cooler with a 2-speed motor up to 1HP at 120 V or 2HP at 240 V
- The onboard sensor of this cooler thermostat has a control range of 50 to 90 degrees Fahrenheit
- Included outputs feature Auto/Manual, Pump, Fan, and Timer modes for versatile use
- If power is interrupted while unit is operating, the unit will resume in the mode active during power loss
- The MasterStat cooler thermostat is easy to install in an existing outlet box with minimal wiring required
- A rain proof control box is included with the ducted evaporative cooler thermostat for protection
- Control box dimensions: 2.38 in. D x 6.25 in. W x 8 in. H
- Easy to install in an existing outlet box - minimal wiring required
| Brand | MasterCool |
|---|---|
| Country of Origin | Imported |
| Features | Kit includes wall control thermostat, 2-speed control, wire nut for common earth connection; spare 3.15 Amp fuse for control, jumper wire for link to N-link |
| Filter Material | N/A |
| Intended Use Grade | Standard |
| Longevity | 0 Unknown |
| Materials Filtered | N/A |
| MERV Rating | 0 Unknown |
| Package Quantity | 1 |
| Product Height | 5 in. |
| Product Length | 1 in. |
| Product Width | 3 in. |
| Warranty | 1 Year Limited |
| Manufacturer Part Number | 110423-2 |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 8 of 8 Questions
Newest questions
Q: I have read answers to questions stating the thermostat needs to hard wired to work. It is and does unless the power is out So what is the circular spot on the inside of the cover that says- open- close if it is not for a back up battery.?
a year ago1 Answer
- A: Hello! Thank you for your question, but we will need more information. Please send us a picture of your thermostat to info@essickair.com for further assistance. -Melissa, Champion Coolera year agoHelpful?
Q: I'm needing to reset to lower temperature
2 years ago1 Answer
- A: Hello, Gina! Please reach out to the manufacturer for troubleshooting assistance. -Melissa, Mastercool2 years agoHelpful?
Q: Is there a way to adjust the display.? It lights up but the font is very faint and almost unable to read. Frustrating...need help. Thank you
3 years ago2 Answers
- A: Hello, Nando87! The display lights cannot be adjusted. If you are having an issue reading your display, please contact Champion Cooler by email at info@essickair.com, or you may contact our cooler hotline by dialing 1-800-643-8341. -Melissa, Mastercool2 years agoHelpful?
Q: There is a cover on the back that unscrews into a battery compartment. This thermostat does not have a betery backup? If so, that means that every time the power blips you have to reset the entire thermostat settings again.
3 years ago2 Answers
- A: Hello! The Masterstat is not battery operated, it must be hard wired into the home in order to operate. If you have any other questions about our products, please email info@essickair.com. -Melissa, Mastercool.2 years agoHelpful?
Q: what size battery does it take?
3 years ago2 Answers
- A: Hello! The Masterstat is not battery operated, it must be hard wired into the home in order to operate. If you have any other questions about our products, please email info@essickair.com. -Melissa, Mastercool.2 years agoHelpful?
Q: MasterStat thermostat installed 4 months ago. Worked fine until today. Cannot get low fan/cool on Auto mode, only high fan. Low fan/cool works with Manual mode.
3 years ago2 Answers
- A: Thanks for reaching out. It sounds like we may need to run through some troubleshooting with you. Please give our Customer Service Team a call at 1-800-643-8341 from 8:00 a.m. to 6:00 p.m. CST, Monday through Friday. We’ll be happy to help you with your unit. Thanks. –Melissa, Mastercool2 years agoHelpful?
Q: Changed out same master stat thermostat. Can’t reset it, it’s showing 18hrs of surge delay. How can I fix this please?
4 years ago1 Answer
- A: For technical assistance you would need to contact MasterCool directly at 1-800-643-8341.4 years agoHelpful?
Q: Existing wiring is 3ea 100VAC+gnd for Dial 7619 CoolerControl. How to use MasterStat Cooler Thermostat without running additional wiring; Expensive and VERY difficult in present location.
4 years ago1 Answer
- A: Please be on the lookout for an email from the vendor.4 years agoHelpful?
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 8 of 8 Questions
Newest questions
Q: I have read answers to questions stating the thermostat needs to hard wired to work. It is and does unless the power is out So what is the circular spot on the inside of the cover that says- open- close if it is not for a back up battery.?
a year ago1 Answer
- A: Hello! Thank you for your question, but we will need more information. Please send us a picture of your thermostat to info@essickair.com for further assistance. -Melissa, Champion Coolera year agoHelpful?
Q: I'm needing to reset to lower temperature
2 years ago1 Answer
- A: Hello, Gina! Please reach out to the manufacturer for troubleshooting assistance. -Melissa, Mastercool2 years agoHelpful?
Q: Is there a way to adjust the display.? It lights up but the font is very faint and almost unable to read. Frustrating...need help. Thank you
3 years ago2 Answers
- A: Hello, Nando87! The display lights cannot be adjusted. If you are having an issue reading your display, please contact Champion Cooler by email at info@essickair.com, or you may contact our cooler hotline by dialing 1-800-643-8341. -Melissa, Mastercool2 years agoHelpful?
Q: There is a cover on the back that unscrews into a battery compartment. This thermostat does not have a betery backup? If so, that means that every time the power blips you have to reset the entire thermostat settings again.
3 years ago2 Answers
- A: Hello! The Masterstat is not battery operated, it must be hard wired into the home in order to operate. If you have any other questions about our products, please email info@essickair.com. -Melissa, Mastercool.2 years agoHelpful?
Q: what size battery does it take?
3 years ago2 Answers
- A: Hello! The Masterstat is not battery operated, it must be hard wired into the home in order to operate. If you have any other questions about our products, please email info@essickair.com. -Melissa, Mastercool.2 years agoHelpful?
Q: MasterStat thermostat installed 4 months ago. Worked fine until today. Cannot get low fan/cool on Auto mode, only high fan. Low fan/cool works with Manual mode.
3 years ago2 Answers
- A: Thanks for reaching out. It sounds like we may need to run through some troubleshooting with you. Please give our Customer Service Team a call at 1-800-643-8341 from 8:00 a.m. to 6:00 p.m. CST, Monday through Friday. We’ll be happy to help you with your unit. Thanks. –Melissa, Mastercool2 years agoHelpful?
Q: Changed out same master stat thermostat. Can’t reset it, it’s showing 18hrs of surge delay. How can I fix this please?
4 years ago1 Answer
- A: For technical assistance you would need to contact MasterCool directly at 1-800-643-8341.4 years agoHelpful?
Q: Existing wiring is 3ea 100VAC+gnd for Dial 7619 CoolerControl. How to use MasterStat Cooler Thermostat without running additional wiring; Expensive and VERY difficult in present location.
4 years ago1 Answer
- A: Please be on the lookout for an email from the vendor.4 years agoHelpful?
Similar Items
-
Top Rated
-
-
-
-
-
-
-
-
-
-
-
Customers Also Bought
-
-
-
Top Rated
-
-
-
-
-
-
-
-
-
Reviews
- instructions
- charging
- cold
- design
- installation
- mounting
- price
- purchase
1 to 4 of 6 Reviews .
1 – 4 of 6 Reviews
Most Recent
Anonymous
Review 1
1 out of 5 stars.
never picking up this item and being charged
9 months ago
i did not pick up this item and I got and email saying it had been picked up.
please refund.
Response from EssickAirProducts:
9 months ago
EssickAirProducts
Hello! Please visit the Tractor Supply store where you purchased this item and request a refund as we cannot assist you with this issue via this site. If you have any other questions or concerns, please contact us at info@essickair.com. -Melissa, Champion Cooler
Review 1
1 out of 5 stars.
waste of money
3 years ago
doesnt allow you to use lo fan in auto mode. you have to use manual mode which is only off or on with no thermostat setting. so basically useless for me.
Sweepstakes EntryYes
No, I do not recommend this product.
Response from EssickAirProducts:
2 years ago
EssickAirProducts
Hello! Thanks for reaching out. It sounds like we may need to run through some troubleshooting with you. Please give our Customer Service Team a call at 1-800-643-8341 from 7:30 a.m. to 5:30 p.m. CST, Monday through Friday. We’ll be happy to help you with your unit. Thanks. – Melissa, Mastercool
AZ
Review 1
5 out of 5 stars.
Works Just Like the Original MasterCool Thermostat
5 years ago
The MasterCool MasterStat Coller Thermostat arrived on the scheduled date. The installation instructions were easy to follow. It took less than an hour to remove the old thermostat and install the new one. The price was great and I was able to extend the warranty for another two years. Works just like the original MasterCool thermostat.
Yes, I recommend this product.
NM
Review 1
5 out of 5 stars.
Great Thermostat - Would buy again!
6 years ago
I bought this thermostat for my swamp cooler and would buy it again. It was necessary to run 3 conductor thermostat wire from my hall to the roof. In my situation, routing was a little difficult but doable. I mounted the controller box on my cooler and wired it per the manual with no issues. I set the temperature to 74F. When the house hits 75, the cooler is switched on. At 72 it switches off. So it hold the house between 73 and 74. I have tried other swamp cooler thermostats which switched power within the thermostat mounted on the wall; however, they don't work well because they tend to self heat after a year or two (dirty contacts). Then they don't track the temperature well. Since this thermostat controller is remote, that can't happen. I like this design much better.
SweepstakesNo
Yes, I recommend this product.
Response from EssickAirProducts:
6 years ago
EssickAirProducts
Hello, Rbrow! Thanks for taking the time to give us your feedback! We are so glad you love your Mastercool thermostat! Thanks, Melissa.