KBS Coatings Spray Gun Filters
Moisture in the air line ruins a spray job, and moisture cured coatings like KBS RustSeal are especially sensitive to it. This disposable dry air spray gun filter attaches directly to the air inlet of your spray gun and catches what your compressor traps miss, including condensation that forms in the hose downstream. As air passes between its compressed layers, it absorbs up to one fluid ounce of moisture and traps oil aerosols and contaminants as small as 0.01 micron, while flowing a true 30 CFM with minimal pressure drop. Clean, dry, oil free air at the gun means fewer fisheyes and paint defects, which matters even more with HVLP guns running on shop air.
- Attaches directly to the spray gun air inlet
- Absorbs up to 1 fluid ounce of moisture
- Traps oil aerosols and particles as small as 0.01 micron
- Catches condensation that forms in the hose after your compressor traps
- Flows a true 30 CFM with minimal pressure drop
- Helps prevent fisheyes and other paint defects
- Protects moisture cured coatings like KBS RustSeal while spraying
- Works with HVLP and conventional spray guns on shop air
- Disposable, replace when saturated
- Single filter
| Brand | KBS Coatings |
|---|---|
| Country of Origin | Made in USA |
| Compatible Paint Types | Oil-based paints, Urethane, Lacquer, Water-based paints, Enamel |
| Features | Disposable dry air filter that attaches to the spray gun air inlet. Absorbs up to 1 fluid ounce of moisture and traps particles as small as 0.01 micron |
| Housing Material | Other |
| Maximum Flow Rate | 2 GPM |
| Maximum Operating Pressure | 87 PSI |
| Maximum Tip Size | 1.8 mm |
| Number Of Spray Settings | 1 |
| Paint Sprayer Type | Other |
| Product Height | 3 in. |
| Product Length | 3 in. |
| Product Weight | 0.75 lb. |
| Product Width | 3 in. |
| Warranty | None |
| Manufacturer Part Number | 100000 |