KBS Coatings KBS Top Coater, Safety Green, 16 oz.

KBS Top Coater Aerosol in Safety Green is a high solids, UV stable spray paint built for farm and ranch equipment. Safety Green is a high visibility color for equipment guards, railings, bollards, gates, and machinery. It bonds direct to bare steel and aluminum, does not run or sag, and gives at least twice the coverage of conventional spray paint, so you buy fewer cans. The gloss finish will not chalk or fade in the sun, which makes it an ideal topcoat over RustSeal on anything that sits outside. One 16 oz can covers up to 38 sq ft in one coat.Apply to clean, dry surfaces. For the best rust protection, seal rusted metal with RustSeal first. Over freshly painted RustSeal 3 to 8 hours old, apply KBS Top Coater directly with no other prep. For all other surfaces, lightly sand or scuff with 320 grit, then clean with KBS Klean, rinse, and dry. Avoid solvent based cleaners, which leave a residue that hurts adhesion. Shake the can for at least one minute after the mixing ball rattles, and shake for about 10 seconds every 1 to 2 minutes while spraying. Spray in moderate to dry conditions, 70 percent humidity or lower. Use smooth, overlapping strokes and apply thin coats; if it runs or sags, the coat is too heavy or the can is too close. Apply one or two thin covering coats, or two to three for marine and industrial use. Recoat once the previous coat is dry to touch, typically 1 to 2 hours, and within 24 hours. To clear the tip, turn the can upside down and spray for 3 seconds. Clean overspray with KBS number 1 Thinner or lacquer thinner.