Skip to main content
Sign In / EnrollGet rewarded!

Sign In / EnrollGet rewarded!
A woman outside with a dog
A woman outside with a dog

KBS Coatings KBS Premium Body Filler, Quart Size

Shop all KBS Coatings
KBS Coatings KBS Premium Body Filler, Quart Size

Item # 2381821

KBS Coatings KBS Coatings KBS Premium Body Filler, Quart Size
KBS Coatings KBS Coatings KBS Premium Body Filler, Quart Size
$21.99
KBS Coatings KBS Premium Body Filler, Quart Size

Item # 2381821

KBS Coatings KBS Coatings KBS Premium Body Filler, Quart Size
KBS Coatings KBS Coatings KBS Premium Body Filler, Quart Size
$21.99

KBS Premium Body Filler, quart size kit (750 ml), is a lightweight, polyester reinforced body filler for light filling and finishing on steel, galvanized steel, aluminum, and polyester surfaces. The activator is included. It mixes at 100 parts filler to 2 to 3 parts activator, spreads smooth and self levels, holds on vertical panels, and is ready to sand in 30 minutes. It feather edges without clogging sandpaper and leaves a pinhole free surface, so there is no separate finishing glaze step before primer. Use it on dents and low spots in truck cabs, doors, fenders, hoods, tractor sheet metal, and equipment panels. Apply up to 1/4 inch thick on a surface between 45 and 110 F.Directions: sand the repair area to clean metal with P40 to P80 grit, clean with KBS Klean, and let it dry completely. Do not apply over thermoplastic finishes or wash primers. On rusted metal, seal the rust with RustSeal first. Mix filler and activator thoroughly to a uniform color, apply in layers no more than 1/4 inch thick, and sand after about 30 minutes. Contains styrene; use with good ventilation and wear gloves and eye protection.

  • Lightweight polyester reinforced filler, activator included
  • Mixes 100 parts filler to 2 to 3 parts activator
  • Ready to sand in 30 minutes
  • Smooth, self leveling formula spreads easily
  • Holds on vertical panels without sagging
  • Feather edges without clogging sandpaper
  • Pinhole free surface, no finishing glaze needed
  • Bonds to steel, galvanized steel, aluminum, and polyester
  • Apply up to 1/4 inch thick at 45 to 110 F
  • For truck, tractor, and equipment dents and low spots