KBS Coatings KBS Patch, 3 x 6in.
$18.99
KBS Patch, 3 x 6 inch size, is a UV activated, fiberglass reinforced polyester repair patch that makes a permanent, watertight seal on metal, plastic, fiberglass, wood, and concrete. There is nothing to mix: cut it to size, peel it, press it on, and let the sun cure it in as little as 3 to 5 minutes, or 30 to 50 minutes on a cloudy day. Where sunlight cannot reach, the KBS UV Light cures it in 10 to 20 minutes. Once cured it can be drilled, tapped, sanded, and painted, it will not rot or rust, and it is rated from minus 30 F to 365 F and 200 to 500 PSI. Use it on gas tanks, water tanks, PVC and drain lines, fenders, gutters, sheet metal, and concrete steps around the farm, shop, and truck. It is not for polypropylene.
- No mixing, single sheet ready to apply from the pouch
- Cures in 3 to 5 minutes in direct sun, 30 to 50 minutes when cloudy
- Cures in 10 to 20 minutes under the KBS UV Light
- Permanent, watertight seal that will not rot or rust
- Bonds to metal, most plastics, fiberglass, wood, and concrete
- Drill, tap, sand, and paint once cured
- Rated from minus 30 F to 365 F and 200 to 500 PSI
- Repairs gas tanks, water tanks, PVC and drain lines, and sheet metal
- Not for polypropylene
- Unused patch goes back in the UV blocking pouch, 3 x 6 inch size
| Brand | KBS Coatings |
|---|---|
| Country of Origin | Made in USA |
| Drywall Repair Type | Patches |
| Features | UV cure fiberglass reinforced repair patch, 3 x 6 inch. No mixing, cures in 3 to 5 minutes in sun, waterproof, drillable and paintable |
| Package Quantity | 1 |
| Primary Material | Fiberglass |
| Product Height | 1 in. |
| Product Length | 4 in. |
| Product Weight | 0.1 lb. |
| Product Width | 7 in. |
| Warranty | None |
| Manufacturer Part Number | 70101 |