KBS Coatings KBS MAXX, Gallon, Med Activator, Hot Rod Black

KBS MAXX in Hot Rod Black is a two component, UV stable topcoat built for equipment that works hard and sits outside. Hot Rod Black is a versatile black for truck frames, trailers, implements, and equipment. It brushes, rolls, or sprays to a hard, chemical resistant matte finish that bonds direct to metal and stands up to fuel, oil, hydraulic fluid splash, and the sun. KBS MAXX alone passed 1,000 hours of salt spray, and 2,000 hours over RustSeal, making it an ideal topcoat for RustSeal on tractors, loaders, and trailers. The gallon kit includes 96 oz of base and 32 oz of MAXX Activator, mixed 3 to 1, and covers about 450 sq ft at 2 mils per coat. Heat resistant to 300 F.Clean the surface well with KBS Klean so it is free of grease, dirt, oil, and loose rust. Apply when the surface is between 45 and 110 F and at least 5 F above the dew point. Mix the base thoroughly with a mechanical mixer, add MAXX Activator at 3 parts base to 1 part activator, and mix again until fully combined. Pot life is 30 minutes, so mix only what you can apply, and never return mixed material to the can. KBS MAXX comes pre thinned and ready to brush, roll, or spray. Use a poly bristle brush or a fine roller, or spray with a 1.0 to 1.5 mm tip. Apply 1.5 to 2 mils per coat. Touch dry in about 30 minutes, recoat from 30 minutes to 3 days with no scuffing, and allow 7 days for full cure. Clean equipment with lacquer thinner, which is for cleanup only and not a reducer.