GroundWork 4-Pattern Hose End Sprayer
Exclusive
GroundWork 4-Pattern Hose End Sprayer
Item # 121277599
Stocked & Ready
$17.99
Spend $49.99 to unlock free delivery!
Get everything you need
Neighbor’s Club Members earn points with purchases.
$17.99
Spend $49.99 to unlock free delivery!
Out of stock at
Grassland (franklin) TN
Delivery to
Pickup Nearby at FAIRVIEW TN(13.2) miles FREE
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Get everything you need
Neighbor’s Club Members earn points with purchases.
Feed your lawn easily with the GroundWork 4-Pattern Hose End Sprayer. This durable hose end sprayer has a 450 mL capacity bottle that stores your chemicals and has an adjustable dial so you can choose your desired concentration. With weather-resistant construction, the sprayer is made to last.
For additional information on this product, please see the Product Documents section for all downloadable user manuals, installation guides, brochures and warranty statements.
- Hose end sprayer has a 450 mL capacity
- Easy to clean
- No pre-mixing required
- Adjustable concentration for versatility
- Thread connector is 3/4-11.5NH
- Weather-resistant
- Can use hot water, but the water temperature should under 176 degrees Fahrenheit
| Brand | GroundWork |
|---|---|
| Country of Origin | Imported |
| Features | Adjustable Spray Pattern, Rust/Corrosion Resistant, Hot Water Use, Leak Resistant Seal, Trigger Lock |
| Fitting Size | L 1.57 W 1.57 H 1.18 in. |
| Handle Length | 4.33 in. |
| Handle Material | Zinc |
| Maximum Operating Pressure | 120 PSI |
| Nozzle Type | Adjustable |
| Number of Spray Patterns | 4 |
| Primary Color | Gray |
| Primary Material | Zinc |
| Product Height | 2.96 in. |
| Product Length | 8.67 in. |
| Product Weight | 0.6 lb. |
| Product Width | 7.68 in. |
| Warranty | None |
| Manufacturer Part Number | GM244 |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 200 Questions
Newest questions
Q: The instruction sheet is different from print on bottle. For ex, the bottle say when using the adapter nozzle, for a low level conc setting of 10, you are using 1.3oz per gal. While the sheet on the bottle neck says 3.08oz per gal. Which is correct?
9 months ago1 Answer
- A: Please refer to the instruction manual for the usage of this product.8 months agoHelpful?
Q: How do I set for 1 tablespoon to 1 gallon dispersion?
11 months ago1 Answer
- A: Please check your email for the requested information.11 months agoHelpful?
Q: Can bleach be used in this
a year ago1 Answer
- A: When mixing bleach for a sprayer, always prioritize safety and follow the manufacturer's instructions for your specific sprayer. A general guideline is to dilute bleach with water, typically using a 1:10 ratio for general cleaning (1 part bleach to 10 parts water). For stronger solutions, like those used for mildew or algae removal, you might use a 1:4 or even a 1:1 ratio, but it's crucial to check the concentration and safety guidelines for your specific application.11 months agoHelpful?
Q: How do iset this for a 1:5 ratio
a year ago1 Answer
- A: Please check your email for the requested information.a year agoHelpful?
Q: can i set sprayer to spray a 50/50 concentration water to product
a year ago1 Answer
- A: The flow and concentration that you use will vary according to the directions on the insecticide/fertilizer that you purchase.a year agoHelpful?
Q: What is conversion to oz.
a year ago1 Answer
- A: Please check your email for the requested information.a year agoHelpful?
Q: How far will this spray
a year ago1 Answer
- A: If spraying upward, it can reach maximum 13 feet. And in order to reach the maximum spray distance, you need to take down the water cover from the nozzle head.a year agoHelpful?
Q: Chemical is not siphoning enough maybe 1/2” after 15 minutes, it’s on 10 flush’s , cleaned it
a year ago1 Answer
- A: Here's how to troubleshoot this problem: 1. Check the Siphon Tube:Inspect and clean the tube: Rinse the siphon tube thoroughly with your hose or in a separate bucket to remove any debris or clogs. You can also use a large paperclip to clean the filter tip, if present. 2. Check the Sprayer Head:Clean the siphoning hole and exit hole,Flush the sprayer head: Turn on the water to flush out any debris that may have been dislodged during cleaning 3. Check the Connection:Ensure a secure connection: 4. Check for Air Blockages:Inspect for air leaks:Air leaks can prevent the sprayer from building enough suction to draw liquid. 5. Check the Nozzle:Inspect for clogs: Look for any visible signs of clogs or dirt in the nozzle. Soak the nozzle in water and vinegar to dissolve mineral deposits and loosen debris. Then, use a small brush or pin to clear debris. 6. Check for Low Water Pressure:Ensure adequate water pressure: While the sprayer head may be working, low water pressure can prevent proper siphoning. Check for kinks or twists in the hose and ensure the spigot is fully open. By following these steps, you should be able to identify and resolve the issue with your Groundworks hose sprayer not siphoning correctly. If the problem persists, it may be necessary to contact the TSC customer service for further assistancea year agoHelpful?
Q: There is no mark to tell you what position to line up the number on the dial to get the desired flow. Where do you line it up to?
a year ago1 Answer
- A: Please check your email for the requested information.a year agoHelpful?
Q: Conversion Chart Please.
a year ago1 Answer
- A: Please check your email for the requested information.a year agoHelpful?
1 - 10 of 200 Questions
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 10 of 200 Questions
Newest questions
Q: The instruction sheet is different from print on bottle. For ex, the bottle say when using the adapter nozzle, for a low level conc setting of 10, you are using 1.3oz per gal. While the sheet on the bottle neck says 3.08oz per gal. Which is correct?
9 months ago1 Answer
- A: Please refer to the instruction manual for the usage of this product.8 months agoHelpful?
Q: How do I set for 1 tablespoon to 1 gallon dispersion?
11 months ago1 Answer
- A: Please check your email for the requested information.11 months agoHelpful?
Q: Can bleach be used in this
a year ago1 Answer
- A: When mixing bleach for a sprayer, always prioritize safety and follow the manufacturer's instructions for your specific sprayer. A general guideline is to dilute bleach with water, typically using a 1:10 ratio for general cleaning (1 part bleach to 10 parts water). For stronger solutions, like those used for mildew or algae removal, you might use a 1:4 or even a 1:1 ratio, but it's crucial to check the concentration and safety guidelines for your specific application.11 months agoHelpful?
Q: How do iset this for a 1:5 ratio
a year ago1 Answer
- A: Please check your email for the requested information.a year agoHelpful?
Q: can i set sprayer to spray a 50/50 concentration water to product
a year ago1 Answer
- A: The flow and concentration that you use will vary according to the directions on the insecticide/fertilizer that you purchase.a year agoHelpful?
Q: What is conversion to oz.
a year ago1 Answer
- A: Please check your email for the requested information.a year agoHelpful?
Q: How far will this spray
a year ago1 Answer
- A: If spraying upward, it can reach maximum 13 feet. And in order to reach the maximum spray distance, you need to take down the water cover from the nozzle head.a year agoHelpful?
Q: Chemical is not siphoning enough maybe 1/2” after 15 minutes, it’s on 10 flush’s , cleaned it
a year ago1 Answer
- A: Here's how to troubleshoot this problem: 1. Check the Siphon Tube:Inspect and clean the tube: Rinse the siphon tube thoroughly with your hose or in a separate bucket to remove any debris or clogs. You can also use a large paperclip to clean the filter tip, if present. 2. Check the Sprayer Head:Clean the siphoning hole and exit hole,Flush the sprayer head: Turn on the water to flush out any debris that may have been dislodged during cleaning 3. Check the Connection:Ensure a secure connection: 4. Check for Air Blockages:Inspect for air leaks:Air leaks can prevent the sprayer from building enough suction to draw liquid. 5. Check the Nozzle:Inspect for clogs: Look for any visible signs of clogs or dirt in the nozzle. Soak the nozzle in water and vinegar to dissolve mineral deposits and loosen debris. Then, use a small brush or pin to clear debris. 6. Check for Low Water Pressure:Ensure adequate water pressure: While the sprayer head may be working, low water pressure can prevent proper siphoning. Check for kinks or twists in the hose and ensure the spigot is fully open. By following these steps, you should be able to identify and resolve the issue with your Groundworks hose sprayer not siphoning correctly. If the problem persists, it may be necessary to contact the TSC customer service for further assistancea year agoHelpful?
Q: There is no mark to tell you what position to line up the number on the dial to get the desired flow. Where do you line it up to?
a year ago1 Answer
- A: Please check your email for the requested information.a year agoHelpful?
Q: Conversion Chart Please.
a year ago1 Answer
- A: Please check your email for the requested information.a year agoHelpful?
1 - 10 of 200 Questions
Similar Items
-
-
-
-
-
-
-
Top Rated
-
Top Rated
-
-
Top Rated
-
Top Rated
-
Top Rated
Reviews
Summary of Reviews
The product has mixed reviews. Many customers found it easy to use and a good value, but the unclear instructions, particularly around dilution settings and measurements, were a significant issue. Some users struggled to properly configure the sprayer, with the ml/L markings causing confusion. Quali...
- English
- German
- French
- Spanish
- Portuguese
- Italian
- Korean
- Chinese
- Japanese
- Arabic
Most Helpful Favorable Review
4 out of 5 stars.
Quality affordable metered sprayer
9 years ago
This sprayer is good quality affordable and a plus that it can be picked up locally. I saw that there was some confusion on the metric measurements, but as I suspected from experience with an identical product, TSC confirmed in the Q&A section that the metered increments are 1 Tbsp. /Gal which I confirmed with my own bucket test. The increments on the bottle are by ML, but if you’re relying on those hash marks for your dilution rate you really have no business dispensing pesticides or fertilizers. Measure your product before you pour it into the sprayer and set your dispensing rate based on that. Really, if you want to get accuracy out of this type of sprayer the material needs to have a viscosity rather close to water so you will most likely be pre mixing it. Also the extra orifice screwed into the dial can be slipped into the feed tube to reduce the dispensing rate to 1 Tsp. /Gal. The only reason I didn't give it 5 stars is in fact the lack of instructions. The bottle has directions, but doesn't give you the dispensing rate in Metric or SAE. For the average Joe who just picked it up in the store and didn't read the Q&A online it could be quite frustrating. Otherwise it's a great product and tractor Supply was prompt in their response to the increments which I hope helps others in the future.
17 people found this helpful
Show Reviews:
Most Helpful Critical Review
2 out of 5 stars.
Groundwork’s end spayer
5 years ago
What is the conversion rate on sprayer? Does the does the dial work on the sprayer? How do I know it is in position 3?
17 people found this helpful
Show Reviews:
Customer Images and Videos
- instructions
- for bottles
- purchase
- settings
- spraying
- information
- quality
- functional
1 to 4 of 82 Reviews .
1 – 4 of 82 Reviews
Most Recent
Cleveland tennessee
Review 1
1 out of 5 stars.
3 months ago
I would like to view the
amount of chemical remaining in the bottle during spraying !!! It's a long way back to barn
No, I do not recommend this product.
Review 1
5 out of 5 stars.
Built to give a decent service life.
a year ago
I'll start out by saying when I looked at the reviews 2 one star ratings were at the top complaining about how the sprayer only had metric measurement and they didn't know how convert to imperial, yet they knew how to get online to leave a review..... That said, I see pictures with these reviews clearly showing a scale of both ounces and milliliters also the packaging indicated the dial adjust the flow rate by table spoons ( 2 per once ) or could be reduced to teaspoons by the included adaptor. The bottle that hold the chemical is only 16oz as apposed to some other brands that may have a 32oz capacity, but this is designed to spray products that are not diluted and mixed as they leave the spray nozzle. I chose this sprayer due to the metallic construction and compact size, it worked flawlessly. The only down side for some may be the bottle neck size and will typically require a funnel to fill, but this also make the threaded connector compatible with other bottles unlike most other sprayers.
Review 1
1 out of 5 stars.
No instructions for gallons/ounces/tablespoons.
a year ago
It is all metric units on the bottle. Terrible for use in the USA. I would expect more from TS.
No, I do not recommend this product.
Review 1
1 out of 5 stars.
Worthless
a year ago
Asked for a conversion chart 3 times, still no conversion chart. It should be included.
No, I do not recommend this product.
Response from Tractor Supply:
a year ago
ACS1800
Please check your email for the requested information, also check your spam and junk mail. The CC has been re-sent to your email.