Make almost anything out of piping by keeping our benchtop tubing notcher in your toolkit. Constructed from solid steel, this easy-to-use tube notcher is built to create accurate notches time after time. It's designed to notch tubing from 3/4-inch to 3-inch in diameter, which means you can build go-carts, a full roll cage for a race car, a custom exhaust on your hot rod and much more. Our pipe notcher does all this while fitting conveniently on most workbenches and sliding into a toolbox drawer when you're done. Use any 1/2-inch hand drill to power the Eastwood Professional Tubing Notcher. It accepts all standard hole saws for cutting the actual notches, such as our 7-piece hole saw kit. The cutting angle is adjustable up to 50 degrees with the loosening of one bolt, giving you countless possibilities. Adjust to your desired angle with one hand and lock down the bearing block with your other. This adjustment method is easier than other designs on the market. Mount it in a vise or on a bench top for stable operation. The Eastwood Professional Tubing Notcher is designed with the professional fabricator in mind to create precision "fishmouth" notches within a wide range of angles from 90 to 140 degrees in tubing. It's equipped with roller bearings and a 25 mm steel shaft, this notcher should provide years of reliable service.