Dairyland 1 gal. Hypo-Chlor Formula 6.4% Sanitizer

A: Hi Misty! Yes, this product can be harmful to skin. If this comes into contact with skin, the affected area should be rinsed with plenty of water for at least 15-20 minutes, and you should contact a doctor or Poison control for treatment advise.

A: Hi Bobokala! This product can be requested for shipment by the store. We recommend giving the store a call and letting them know you are interested in ordering this product and the desired quantity needed.

A: Hi Lonster, No. Ingesting this chemical poses severe health risks and requires immediate emergency medical attention, as it can cause catastrophic internal burns. This product is strictly formulated for sanitizing commercial milking equipment and must never be consumed.

A: Hi Dave, This product is formulated with 6.4% sodium hypochlorite rather than 100% hypochlorous acid (HOCl). It is a concentrated liquid sanitizer and deodorizer designed for milkhouse and food plant sanitation tasks.

A: Hi Aammww! Yes, this sanitizer is designed for food plant sanitation tasks and egg sanitization. It is safe for use on food contact surfaces and does not require a potable water rinse after application.

A: Hi Neighbor! When mixing Dairyland Hypo-Chlor Formula 6.4% Sanitizer, it is highly recommended to use warm water. For general cleaning and egg sanitization, water temperatures should not exceed 130°F.

A: Hi Neighbor! No, Dairyland Hypo-Chlor Formula 6.4% does not require a potable water rinse on food contact surfaces.

A: Hi Dogmom! This product should not be used around dogs or other animals. This can be very toxic to animals including dogs.

A: Hi Neighbor- nstructions for Use: Non-Porous Food Contact Surfaces: Mix 1 oz with 4 gallons of water (100 ppm). Porous Food Contact Surfaces & Equipment: Mix 2 oz with 4 gallons of water (200 ppm). Milking Equipment (CIP): Clean equipment, then pump a 200 ppm solution (2 oz/4 gal) through the system for 10 minutes. Application Method: Apply by spraying, immersing, or circulating. Allow surfaces to air dry. Safety Precautions: Use in well-ventilated areas. Wear goggles and rubber gloves to avoid skin/eye irritation. Do not mix with acids or ammonia as this releases hazardous gas.