Carry-On Trailer Steel Fender with Back, 9 in. x 30 in.
Carry-On Trailer Steel Fender with Back, 9 in. x 30 in.
Item # 1750153
$74.99
Neighbor’s Club Members earn points with purchases.
$74.99
New Cardmembers earn a $20 Reward‡ with qualifying purchase of $20 or more plus earn 5% in Rewards+ on this purchase. Valid through 8/9/26.
Shopping at
Grassland (franklin) TN
Delivery to
Free standard delivery on online footwear & Clothing purchases of $49 and over.
Neighbor’s Club Members earn points with purchases.
The Carry-On Trailer Steel Fender with Back is a replacement for 2,000 lb. gross vehicle weight rated trailers. Constructed from steel, this fender offers strength and reliability. The dimensions of the steel fender measure 9.25 in. W x 30 in. L x 10.25 in. H. The minimum wheel size of the fender with back is 15 in.
- Single fender with back
- Minimum Wheel Size: 15 in.
- Fits most single axle trailers with 13" tires
- Dimensions of fender with back: 9.25 in. W x 30 in. L x 10.25 in. H
- Steel fender offers long-lasting use
- Replacement steel fender for 2,000 lb. GTW rated trailers
| Brand | Carry-On Trailer |
|---|---|
| Country of Origin | Made in USA |
| Compatibility | Replacement steel fender for 2,000 lb. GTW rated trailers |
| Maximum Weight Capacity | 0 lb. |
| Mounting Type | Weld-On |
| Package Quantity | 1 |
| Primary Material | Steel |
| Product Height | 10.25 in. |
| Product Length | 30 in. |
| Product Weight | 8.05 lb. |
| Product Width | 9.25 in. |
| Manufacturer Part Number | 357T |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 6 of 6 Questions
Newest questions
Q: Is this a single fender or comes in pairs ?
2 months ago1 Answer
- A: This is a single fender.2 months agoHelpful?
Q: Does this fender need painting when kept outside? I bought these and within 4 days it was covered with rust!
11 months ago1 Answer
- A: Yes fender does need painting.11 months agoHelpful?
Q: the reviews here state the dimensions are not correct. What is the actual width? Is it the 30" as stated in specs or as the customer measured 26" (?)
a year ago1 Answer
- A: if the customer has measured the fender opening and got 26"" then i would go with that. The fender must be labeled incorrectly.a year agoHelpful?
Q: What is the measurements for the back plate & what gauge is it?
5 years ago1 Answer
- A: the back plate is 10” tall in the center and follows the inside radius of the fender. The material is 16ga cold rolled steel. hope this helps - sorry for delay thank you5 years agoHelpful?
Q: What is the actual inside diameter of this fender
7 years ago1 Answer
- A: fender part# 357T - Product Length: 30 in. Product Width: 9 in. for 15" tire and wheels.7 years agoHelpful?
Q: Is it galvanized steel or bare steel?
9 years ago1 Answer
- A: The 9"x30" part no. 357 fender is steel.9 years agoHelpful?
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 6 of 6 Questions
Newest questions
Q: Is this a single fender or comes in pairs ?
2 months ago1 Answer
- A: This is a single fender.2 months agoHelpful?
Q: Does this fender need painting when kept outside? I bought these and within 4 days it was covered with rust!
11 months ago1 Answer
- A: Yes fender does need painting.11 months agoHelpful?
Q: the reviews here state the dimensions are not correct. What is the actual width? Is it the 30" as stated in specs or as the customer measured 26" (?)
a year ago1 Answer
- A: if the customer has measured the fender opening and got 26"" then i would go with that. The fender must be labeled incorrectly.a year agoHelpful?
Q: What is the measurements for the back plate & what gauge is it?
5 years ago1 Answer
- A: the back plate is 10” tall in the center and follows the inside radius of the fender. The material is 16ga cold rolled steel. hope this helps - sorry for delay thank you5 years agoHelpful?
Q: What is the actual inside diameter of this fender
7 years ago1 Answer
- A: fender part# 357T - Product Length: 30 in. Product Width: 9 in. for 15" tire and wheels.7 years agoHelpful?
Q: Is it galvanized steel or bare steel?
9 years ago1 Answer
- A: The 9"x30" part no. 357 fender is steel.9 years agoHelpful?
Similar Items
-
-
-
Top Rated
-
Top Rated
-
-
-
Top Rated
-
-
-
-
Top Rated
-
Items You May Like
-
-
-
Top Rated
-
-
-
Top Rated
-
-
-
-
-
-
Customers Also Bought
-
-
Top Rated
-
-
-
-
-
-
Top Rated
-
-
-
-
Reviews
- holding
- large
- quality
- repairs
1 to 4 of 4 Reviews .
1 – 4 of 4 Reviews
Most Recent
Review 1
5 out of 5 stars.
Trailer fenders
2 months ago
These are a little big but I made it work. They look great
Yes, I recommend this product.
Response from Carry-On Trailer Customer Service:
2 months ago
Carry-On Trailer Customer Service
We are very happy that you are pleased with your trailer fenders. thank you for your high rating.
Review 1
1 out of 5 stars.
Poor Quality
a year ago
Fender fell off after 20 short trips.
Response from Carry-On Trailer Customer Service:
a year ago
Carry-On Trailer Customer Service
You have a one year Warranty from the date of purchase with Carry-On Trailer. Please call Carry-On Trailer Customer Service (800) 240-3121 Ext. 1915.
Augusta Maine
Review 1
1 out of 5 stars.
Not what they say they are
a year ago
The 30” fenders only measure 26”
No, I do not recommend this product.
Spring Hill, Fl
Review 1
1 out of 5 stars.
Tack welds failed in less than 12 hours
3 years ago
Tack welds holding fender and side panel together failed in less than 12 hours requiring interruption of travel overnight and next day weld repair.
No, I do not recommend this product.
Response from Carry-On Trailer Customer Service:
3 years ago
Carry-On Trailer Customer Service
please contact Carry-On Trailer Customer Service 800-240-3121 ext. 1915. Please have your trailers VIN number when you call.