Hopkins Towing Solutions 2 in. 12 V Round LED Clearance/Side Marker Light, Red
$9.99
Hopkins Towing Solutions 2 in. 12 V Round LED Clearance/Side Marker Light, Red
Hopkins Towing Solutions 2 in. 12 V Round LED Clearance/Side Marker Light, Red
Item # 105038099
$9.99
Neighbor’s Club Members earn points with purchases.
Hopkins Towing Solutions 2 in. 12 V Round LED Clearance/Side Marker Light, Red
Item # 105038099
$9.99
Out of stock at or near
Grassland (franklin) TN
Out of stock delivering to
37027
This item is not available
Search Stores
Temporarily unavailable
Neighbor’s Club Members earn points with purchases.
The LED 2" round clearance and side marker light in red is designed to conform to applicable US FMVSS108 and Canadian CMVSS safety standards for clearance lighting. The marker light contains 1 high-output LED for exceptional brightness and performance. The life of a LED light far exceeds traditional incandescent lights and draws significantly less power. The lens is sonically sealed to the housing to provide protection from moisture and corrosion. Additionally, all electronics are potted with water resistant resin for a second layer of defense. Package includes one light, grommet and plug- everything needed for an easy install.
Looking for more information on car and truck lighting? Check out our guide on lighting types in the product documents section.
- Works with 12 V systems
- Accepts industry standard 2-prong plug
- Current draw: 0.05 Amps
- Housing and lens are sonic welded to create a sealed light
| Brand | Hopkins Towing Solutions |
|---|---|
| Country of Origin | Imported |
| Bulb Type | LED |
| Compatibility | 12V Surface Mount |
| Current Rating | 0.05A |
| Features | DOT Approved, Waterproof |
| Light Color | Red |
| Mounting Location | Other |
| Mounting Type | Other |
| Number of Connections | 2 |
| Package Quantity | 1 |
| Power Type | 12 Volt |
| Primary Material | Plastic |
| Product Height | 2 in. |
| Product Length | 1 in. |
| Product Weight | 2 lb. |
| Product Width | 1/4 in. |
| Shape | Round |
| Voltage | 12V |
| Wattage | 0.6W |
| Wire Length | 5 in. |
| Manufacturer Part Number | C525R |
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 3 of 3 Questions
Newest questions
Q: I’d like to use 3 of these to act as a tail, brake, and turn signal lights. I’m replacing incandescent bulbs with these LED lights. Would it be recommended to use a resistor with these lights?
6 years ago1 Answer
- A: Jimandpam You would not need to use a resistor under normal application but using the lights outside of what they were designed for we may need more information to answer that question. As long as the lights are getting 12v signal you shouldn’t need any resistors. If you have any more questions please call 1-800-835-0129 Monday-Friday, 8-5 central time. Thanks6 years agoHelpful?
Q: does this product use the standard 2 prong plug like other similar lights ???
6 years ago1 Answer
- A: Shooter1 This product does use the industry standard 2 prong plug. If there are any other questions that we can answer, feel free to call our Tech Support Line at 800-835-0129. We are here Monday-Friday 8:00am-5:00pm CST Thank you6 years agoHelpful?
Q: What size hole is required to mount this light?
8 years ago1 Answer
- A: 2 5/16” hole for the 525 LED Clearance/marker light. This will allow the grommet to fit in and the light seats into the grommet.8 years agoHelpful?
Q&As
Have a question?
Start typing your question and we'll check if it was already asked and answered.
1 - 3 of 3 Questions
Newest questions
Q: I’d like to use 3 of these to act as a tail, brake, and turn signal lights. I’m replacing incandescent bulbs with these LED lights. Would it be recommended to use a resistor with these lights?
6 years ago1 Answer
- A: Jimandpam You would not need to use a resistor under normal application but using the lights outside of what they were designed for we may need more information to answer that question. As long as the lights are getting 12v signal you shouldn’t need any resistors. If you have any more questions please call 1-800-835-0129 Monday-Friday, 8-5 central time. Thanks6 years agoHelpful?
Q: does this product use the standard 2 prong plug like other similar lights ???
6 years ago1 Answer
- A: Shooter1 This product does use the industry standard 2 prong plug. If there are any other questions that we can answer, feel free to call our Tech Support Line at 800-835-0129. We are here Monday-Friday 8:00am-5:00pm CST Thank you6 years agoHelpful?
Q: What size hole is required to mount this light?
8 years ago1 Answer
- A: 2 5/16” hole for the 525 LED Clearance/marker light. This will allow the grommet to fit in and the light seats into the grommet.8 years agoHelpful?
Similar Items
-
Top Rated
-
Top Rated
-
-
Top Rated
-
-
Top Rated
-
-
-
Top Rated
-
Top Rated
-
Top Rated
-
Top Rated
Items You May Like
-
Top Rated
-
Top Rated
-
-
-
Top Rated
-
-
-
-
-
-
Top Rated
-
Customers Also Bought
-
Top Rated
-
Top Rated
-
-
-
-
Top Rated
-
Top Rated
-
Top Rated
-
Top Rated
-
Top Rated
-
-
Top Rated
Reviews
1 to 1 of 4 Reviews .
1 – 1 of 4 Reviews
Most Recent
Erie pa
Review 1
5 out of 5 stars.
Good light
3 years ago
Very nice replacement light for my 20 year old light's a little pricey but what's not now a days in this screwed up country. Over all good light very bright.
Sweepstakes EntryYes
Yes, I recommend this product.