Built with a 48V DC input, the AIMS Power 10,000W Pure Sine Inverter Charger performs with very little power loss. Users receive a notable increase in efficiency in large systems when compared to using inverters that accept 12 or 24V. This can be an attractive feature for sustainability lovers looking to live as efficiently as possible. The most common use for this pure sine inverter charger is emergency backup power for residences, businesses and large off grid applications. You'll always be prepared for the next power outage with access to 10,000W of continuous power and 30,000W of surge (for up to 20 seconds). The auto-generator start port is also a great feature for emergency backup power, as it will automatically kick on your generator when it senses your battery bank getting low. One of the most sought-after features this inverter has is the direct-connect terminal block, which allows users to surpass the 10,000W capacity and harness its 300% surge power (up to 30,000W for 20 seconds as previously noted). Have a hunting cabin or off-grid vacation home? This AIMS Power inverter is perfect for supplying reliable electricity to the entire house. This inverter is also built to withstand reasonable heat and temperature fluctuations because of its over-temperature protection and dual thermally-controlled fans. And it's protected from humidity or airborne dust and dirt by virtue of its marine-coated (or ""conformal-coated"") boards. This inverter provides the reliability needed in any business or residential emergency backup power applications. This inverter is split-phase and will output 120 or 220/230/240V AC, and it can output 50 or 60 Hz via the SW4 dipswitch on the DC side of the product. This means that this inverter works internationally and is operable with nearly any electrical system on the planet.

• 30,000W surge for 20 seconds - 3x surge capability
• Battery priority selector
• AC direct connect terminal block allows users to surpass the 10,000W capacity and harness the 300% surge power
• Marine coating boards protect against humidity and airborne dust and dirt
• Multi stage smart charger 85 Amp
• Remote panel available
• Auto generator start port automatically kicks on your generator when it senses your battery bank getting low
• Auto frequency
• 10msec typical transfer time
• Optional 25W power save mode
• 7 battery type settings for charger
• Pure sine inverter charger increases efficiency in large systems
• Over-temperature protection and dual thermally-controlled fans allow the AIMS Power inverter to withstand reasonable heat and temperature fluctuations
• Split-phase inverter will output 120 or 220/230/240Vac
• Can output 50 or 60 Hz via the SW4 dipswitch on the DC side of the product, allowing the inverter to work internationally