A: If the unit is new, please confirm that you have removed the tipping cup stabilizer from the bottom of the Iris Outdoor Sensor where the vents are located. Once that is confirmed, please perform the following hard reset steps between the display and outdoor sensor: Hard Reset: Bring both the sensor and display unit together and remove batteries from the outdoor sensor. Remove the batteries and power adapter from the display unit. Allow both units a full 2 minutes to completely power down. Change the A-B-C switch on both units to a new, matching channel then press and hold the reset button in the battery compartment of the indoor display unit for 20 seconds if applicable. You may need a paperclip or a toothpick to do this. Reinstall the batteries in the outdoor sensor. Reinstall batteries and power cord into the display unit then immediately press and hold the reset button again for 20 seconds if applicable. Let the units sit within a couple of feet of each other for approximately 5 minutes or until you see a solid sensor signal. Once the two units have connected, please gently and slowly tip the outdoor sensor back and forth, nose to tail, 5 times listening for the click of the tipping cups each time. Wait 1 minute and confirm if you see a rainfall reading of 0.05" of rainfall on the display screen.

A: If your station is reading inaccurately, please ensure you are using fresh batteries in both units, then perform the following reset. Please follow the steps carefully as the order is crucial to the success of the reset. Hard Reset: 1. Bring both the sensor and display unit together and remove batteries from the outdoor sensor. Make sure that the Wireless Reception Indicator on the display drops to zero bars to ensure that your display was connected to the correct sensor. (If your wireless reception indicator already indicates zero bars, please proceed to Step #2.) NOTE: If your display unit continues to show a strong connection, there is another sensor in your area that your display is connecting to (either a neighbor's or from another of your AcuRite units). If you have multiple sensors, make sure to use a different ABC channel on each. 2. Remove the batteries and/or power adapter from the display unit. 3. Change the A-B-C setting on both units to a new, matching channel then press and hold the reset button in the battery compartment of the display for 20 seconds, if applicable. 4. Reinstall the batteries in the outdoor sensor. 5. Reinstall batteries and/or power cord into the display unit then immediately press and hold the reset button again for 20 seconds, if applicable. 6. Let the units sit within a couple of feet of each other for approximately 5 minutes or until you see a solid sensor signal. For further assistance, please reach out to our support team via live chat or email request on the AcuRite Support website. Have an excellent day! Haylee AcuRite Support Team

A: The solar panels power the internal aspirating fan when the sensor is exposed to direct sunlight, helping to ensure a more accurate ambient temperature measurement. The outdoor sensor requires 4 AA batteries. The solar panels do not charge the batteries or provide power to the sensor. If you have further questions, please reach out to our support team via live chat or email request on the AcuRite Support website. Have a great day! Haylee AcuRite Support Team

A: The unit does include a future forecast feature to predict the weather for the next 12-24 hours and measures rainfall. If you have further questions, please reach out to our support team via live chat or email request on the AcuRite Support website. Have a delightful day! Haylee AcuRite Support Team

A: This station is not able to stream its sensor data online on its own. For assisting with selecting a weather station that includes this feature, please reach out to our support team via live chat or email request on the AcuRite Support website. Have a spectacular day! Haylee AcuRite Support Team

A: The Iris (5-in-1) Weather Station includes a mounting bracket and hardware that can be attached to a post or surface. Alternatively, you can purchase a length of 3/4 inch schedule 40 or 80 PVC pipe or a steel pole with an outer diameter of one inch to mount the sensor directly on. If you have further questions, please reach out to our support team via live chat or email request on the AcuRite Support website. Have a nice day! Haylee AcuRite Support Team

A: No, this station is not compatible with additional sensors. For further assistance, please reach out to our support team via live chat or email request on the AcuRite Support website. Have a nice day! Haylee AcuRite Support Team

A: We warrant that all products we manufacture under this one-year limited warranty are of good material and workmanship and, when properly installed and operated, will be free of defects for a period of one year from the date of purchase. For more information, please reach out to our support team via live chat or email request on the AcuRite Support website. Have a great day! Haylee AcuRite Support Team

A: No, this model does not include a lightning detector as it is not compatible. If you have further questions, please reach out to our support team via live chat or email request on the AcuRite Support website. Have a gorgeous day! Haylee AcuRite Support Team

A: Yes, the display stand can be removed and the display can be mounted on a wall using it's integrated keyhole hangers. The display's main power source is the included power adapter with batteries for backup in case of a power outage. The display can operate on battery power only, however, the backlight will remain off unless activated momentarily by pressing the backlight button. If you have further questions, please reach out to our support team via live chat or email request on the AcuRite Support website. Have a delightful day! Haylee AcuRite Support Team